sludge tank News

  • Calculate Lbs. of Solids in Sludge Tank

    Explains basic formula format, discusses elements; Gallons of Tank as Million Gallons (MG), Concentration expressed as increment of millions (PPM or Mg/L), Uses Standard Conversion Factor from Gallons to Lbs., and finally requests subscribing and interacting. View "Calculate Lbs. of Solids in Sludge Tank" ...

  • Calculate Gallons of sludge in a Conical Bottom Circular Tank

    Explains basic formula format, discusses elements; Utilizes same basic formula as volume calculation of Tank and Cone, Explains difference of Side Wall Depth and Sludge Level, Converts Volume as Cubic Feet of Tan and Cone to Total Gallons and finally requests subscribing and interacting. View "Calculate Gallons ...

  • The Sludge Gun®: Target Your Sludge!

    This Portable Sludge Blanket Level Detector measures solid-liquid interface levels in clarifiers, tanks and lagoons, and helps provide valuable silt and sludge level profiles. It allows users to monitor sludge bed depth for regulatory compliance and prevention of carryover, and to eliminate unnecessary pumping/dredging. Using high-intensity infrared light, it detects sludge densities ranging ...

  • Controlling Sludge in Lamella Clarifiers

    This month we are focusing on the control of sludge blanket build up in Lamella Clarifiers. Lamella Clarifiers, also known as Inclined Plate Separators (IPS) are in common use at Waste Water Treatment Sites as small footprint plant settlement units and are often employed in place of conventional settling tanks. Controlling Sludge Blanket Build up Effluent ...


    By Partech (Electronics) Ltd.

  • Using ozone to reduce sludge

    Untitled Document An excess of sludge in a sewage treatment plant is not a new problem. For a long time, “end of pipe” ...


  • SludgeWatch 715 Sludge Blanket Detector

    For our Partech instrument product focus this month, we’re looking at our portable 715 sludge blanket detector. It’s one of our most popular products with distributors all over the world and it’s not surprising as to why people like it so much… This little ...


    By Partech (Electronics) Ltd.

  • Calculate Lbs. in Activated Sludge Process

    Explains basic formula format, discusses formula requirements calculating Lbs. using Gallons as (MG) from multiple Tanks and finally requests subscribing and interacting. View " Calculate Lbs. in Activated Sludge Process " Video on ...

  • Discover a new heat recovery sludge-to-sludge heat exchanger at WEFTEC

    Claro Large Gap sludge-to-sludge heat exchangers are a new, patented concept sludge-to-sludge heat recovery technology that can recover up to 85% of outgoing thermal energy from a variety of process tanks such as anaerobic digesters. Heat recovery for anaerobic digesters offer the additional benefits of making significantly more biogas available for heating the facility, generating electricity, ...


    By Claro Inc

  • Thermophilic sludge digestion at STP Bath

    Thermophilic sludge digestion in theory offers a profitable outlook in support of the strategy to realize energy neutral or even energy producing STP’s. As part of the proof of concept efforts, one of the full scale twin sludge digestion tanks will be tuned from mesophilic to thermophilic ...


    By Colsen International b.v.

  • New addition to Sludge Screen range

    Following the launch of the S:Max sludge screen to the UK sewage and wastewater treatment market in 2010 CDEnviro have announced an expansion of the range. The new S:Max SRU10 is designed for operators requiring smaller capacities than that offered by the SRU25 model. “The SRU25 was initially designed for introduction to major sludge processing sites such as the one at Minworth Sewage ...


    By CDEnviro

  • Supercritical water oxidation of sewage sludge

    ABSTRACT Supercritical water oxidation (SCWO) is an innovative and effective destruction method for organic wastewater and sludge. Several tests of the destruction of sewage sludge by SCWO have been done at two state of the art pilot plants. These units have capacities of 250 kg/h and 1100 kg/h, respectively. The test results show that the technology easily destroys the organic ...


    By SCFI Group Limited

  • Thicker sludge saves time and money

    Recent improvements in pump technology prompted Severn Trent Water (STW) to initiate a de-sludging trial to reduce costs and energy consumption by producing thicker sludge in the Primary Settlement Tank (PST). Advanced monitoring instrumentation from HACH LANGE played a key role in the trial which, nine months after it began, has been heralded a success. STW's Mark Bryan summarises the objective ...


  • Testing conditions for tank testers

    In addition to the financial implications of the loss of product, leakage from storage tanks can cause serious environmental damage and represent a grave threat to health and safety. In some circumstances, particularly when the stored materials are combustible or explosive, leakage can result in a major incident involving the loss of life and substantial damage to assets and to an ...


    By Ashtead Technology Ltd

  • New revolutionary Sludge Dewatering Separator (SDS)

    Now there is good news to all those who have to handle hydrous oily sludge, both on land and at sea. Faroe Maritime Technic (FMT), have during the latest 9 months developed and tested a prototype, to separate free and emulsified water from oily-sludge. The system was originally a book up task from a large Danish shipping company, who wanted a total solution, ...


    By Faroe Maritime Technic

  • Severn Trent increase sludge screening efficiency

    A new sludge screening system has resulted in Severn Trent Water significantly increasing the efficiency of sludge screening operations at Minworth Sewage Treatment Works on the outskirts of Birmingham. Since the new sludge screen has been introduced by Severn Trent the company has reported significant operational efficiencies as a result of increased screenings removal from the imported sludge, ...


    By CDEnviro

  • Lightweight Tank Sampling Kit - ON SALE

    If it involves sampling, we probably have a kit or tool to get your job done quickly and correctly.  Which is why we want to offer you 20% off our aluminum tank sampling kit or anything in the kit! How the aluminum tank sampling kit works: Easily collect sludge samples from the bottom of petroleum tanks with ...

  • High-end sludge treatment solutions for demanding applications

    DEWACO LTD offers solutions to the world's most complex sludge treatment problems. The company can also help to reduce environmental impacts and substantially improve efficiency in producing bioenergy from waste.  The company provides complete sludge thickening, dewatering and sludge removal systems. Its combined process ...


    By Dewaco Ltd

  • New sludge screen launched to the UK industry

    The new SMax from CDE Global is the latest addition to the company’s product offering through their CDEnviro division. CDEnviro offer a range of products to the sewage and waste water treatment sectors with a focus on improving screening efficiencies and reducing waste volumes. The SMax unit is designed to handle a variety of materials including sewage, , digested sludge and imported sludge ...


    By CDEnviro

  • Processing – Settlement Using Conical Tanks

    Waste water management is an issue across a number of industries, from manufacturing, engineering and construction and the separation of impurities from water and other liquids can be effortlessly achieved using dedicated cone bottom tanks, otherwise known as conical tanks.  Manufactured using a single piece of rotationally moulded uv-stabilised polyethylene, cone bottom tanks feature just ...


    By ENDURAMAXX

  • Processing – Settlement Using Conical Tanks

    Waste water management is an issue across a number of industries, from manufacturing, engineering and construction and the separation of impurities from water and other liquids can be effortlessly achieved using dedicated cone bottom tanks, otherwise known as conical tanks. Manufactured using a single piece of rotationally moulded uv-stabilised polyethylene, cone bottom tanks feature just that, a ...


    By ENDURAMAXX

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you