small hydraulic power News

  • Innovyze unveils InfoView, unlocking the power of smart network modeling for small water utilities

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the fourth quarter 2013 release of InfoView Water. Designed in response to the needs of the small utility community and its engineering consulting firms, this power tool gives users fast, easy access to powerful network modeling information and functionality without ...


    By Innovyze

  • Hydraulic Fracturing Companies Using Oil Skimmers to Clean Flowback

    Hydraulic fracturing (fracking) is a process that recovers natural gas and oil from deep shale formations that contain large amounts of the fuels. Fracking requires the drilling of a well vertically underground, past the deepest aquifer containing fresh groundwater. Steel surface casing is inserted down the well ...


    By Oil Skimmers, Inc.

  • Eaton Simplifies Small Motor Load Overload Protection with New Cost Effective Enclosed Manual Motor Starter Package

    Power management company Eaton today announced the launch of a competitively priced, enclosed manual motor starter with hand-off-auto (HOA) functionality and run light indication. Designed to meet the needs of contractors, original equipment manufacturers (OEMs), and distributors in the construction and heating, ventilating and air conditioning (HVAC) markets, this compact, cost-effective package ...


    By Eaton Corporation

  • Westinghouse Electric Company Announces Next Step in Fuel Production for the Westinghouse Small Modular Reactor

    Westinghouse Fuel Fabrication Facility in Columbia, S.C., initiates fabrication of small modular reactor prototype fuel assemblies for testing Westinghouse Electric Company today announced the next step in the production of fuel for the Westinghouse Small Modular Reactor (SMR). The Westinghouse engineering design team ...


  • Global Hydraulic Fracturing Market by Resource and Well Type – market Trends & Forecasts up till 2017

    Hydraulic fracturing is the propagation of fractures through layers of rock using pressurized fracturing fluid. This technique is primarily used in the extraction of resources from low permeability reservoirs – such as shale gas, tight gas, CBM, and unconventional liquids – which are difficult to recover through regular drilling procedures. Hydraulic fracturing services are provided ...


  • All power pump applications to be analyzed on a free website

    Pumps work in thousands of power industry applications.  Each coal-fired, combined cycle gas, and nuclear power plant requires hundreds of pumps.  They range the gamut of sizes and designs from the 6000 gpm (7000 ft head) vertical boiler feed water pumps to the little positive displacement chemical metering pumps.  Geothermal plants have special pump requirements.  Pumps are ...


    By The McIlvaine Company

  • Neptune Benson Introduces ETS-Ultraviolet Disinfection Systems Used in Hydraulic Fracture Operations

    Neptune Benson, a leading manufacturer of commercial filtration systems, ETS- UV disinfection systems, and components, has perfected a UV system that provides superior performance in the very harsh environment of fracture operations.  The emergence of Hydraulic Fracturing or “Fracking” as it ...


  • Oil Skimmers for Hydroelectric Power Plants: Another Green Idea from Abanaki

    CLEVELAND - Abanaki announced a full range of oil skimmers and emergency oil spill systems for the special challenges facing hydroelectric power generation facilities, who must protect water resources from spills of hydraulic fluid. Although hydroelectric-generated electricity is considered clean, small leaks of hydraulic oil from turbines at hydroelectric plants are not uncommon. The oil can end ...


    By Abanaki Corporation

  • Oil-spill response vessels launched

    Alnmaritec has delivered two boats in the oil-spill and pollution control market. The most recent delivery was a boom deployment and spill response boat Response 1 to the Barbados National Terminal Company for operation on their oil export facility at Oistins Bay on the South Coast of the island. This delivery follows completion of a high-speed pollution response boat which is operated by ...


  • Eaton significantly reduces time to deliver Vickers PVM pumps

    To respond to the needs of its European customers, Eaton has localized the assembly and testing of its Vickers® PVM pump at its Wehrheim facility in Germany. This change has significantly reduced the lead time for the most popular PVM builds to less than eight weeks when ordered in small or medium quantities. John Taylor, EMEA Product Manager for Open Circuit Piston Pumps: “As a result ...


    By Eaton Corporation

  • Alnmaritec boats in oil spill response

    Alnmaritec Limited, a UK specialist boat builder, is rapidly gaining recognition in the market for oil spill response/pollution control vessels with two new boats delivered this year. The most recent delivery was a boom deployment and spill response boat to the Barbados National Terminal Company Ltd. The new vessel ‘Responder 1' is based upon the successful Wave Worker class from ...


  • Eaton Tapped to Enhance Electrical Safety, Reliability at FAA Headquarters

    Diversified industrial manufacturer Eaton Corporation today announced a contract valued at more than $1 million to supply the Federal Aviation Administration (FAA) headquarters in Washington, D.C. with upgraded network protectors designed to safeguard the constant flow of safe, stable power to the 847,391 square foot U.S. General Services Administration (GSA) operated building, which was ...


    By Eaton Corporation

  • Trailer pump operation and performance (part 1 of 3)

    Crisafulli pumps are naturally robust, and capable of handling a variety of unscreened water-borne debris and slurry mixtures. The following table lists the maximum sizes of spherical solids each model can pass without clogging. Occasionally the pump's speed will have to be changed to get more or less flow and pressure. A small change in speed can result in a large change in power required. ...


    By SRS Crisafulli, Inc.

  • New Boxer, Morbark Models Featured at The Rental Show

    Boxer to Launch Largest, Most Advanced Mini-Skid Steer Morbark and Boxer will display some of their newest and most popular product offerings in their booth (#3257) at The Rental Show, produced by the American Rental Association, at the Georgia World Congress Center in Atlanta from February 21-24, 2016. Boxer will introduce its largest ...


  • HSM V-Press 504 – Lower Space Requirements and Easy Installation

    The newest baling press of the vertical series is the HSM V-Press 504 with a pressing power of 40 kN. This baling press is versatile due to its compact and sturdy design as well as its small footprint. Packaging is indispensable for gentle transportation of goods, but it can become a problem if it piles ...


    By HSM GmbH + Co. KG

  • Going to the 2011 ICUEE Show

    A the upcoming 2011 ICUEE show in Lousiville, Kentucky, Universal HDD will present two new models and one newly redesigned rig. The new models include short range UNI 22x22 and long range UNI 250x400. Also at the show, attendees will be able to see and test newly redesigned UNI 110x120. The new UNI 22x22 will feature 22,000 lbs of trust & pullback force, with rotation speed between 0-240 ...


    By Universal HDD

  • SIMCO 255 PTC: best road core drilling rig for keyhole drilling work

    The affordable and maneuverable SIMCO 255 Pavement Test Core (road core drilling rig) rig is the perfect piece of equipment for any city or state utility core drilling. Used by transportation departments across the United States from Georgia to South Dakota and Texas to Nevada, the 255 has pavement core drilling features to get your jobs done quickly. ...

  • The advantage of Using CNC Grinding Machine in Micro Compressor Processing

    Compressor is the core of the refrigeration system, the refrigeration system and characteristics were determined by the capacity and characteristics .Micro compressor has small volume, light weight, high power, low energy consumption, quiet work and no vibration. Due to these characteristics of Micro Compressor, so we have high requirement for CNC Grinding Machine, such as request high ...


  • ANDRITZ SEPARATION presents new product series of filter presses driven by compressed air

    ANDRITZ SEPARATION, part of international technology group ANDRITZ, has developed a new, innovative product series of filter presses. The SP series is a so-called “air-over-oil” filter press driven exclusively by compressed air – a power connection is, therefore, not required. With the new SP series, ANDRITZ is primarily targeting the process and wastewater industries. ...

  • Eaton’s DuraForce® Pumps Keep Kalmar’s RT022 Rough-Terrain Telescopic Forklifts Operating During Expeditionary Military Operations

    Power management company Eaton today announced that its DuraForce® HPV pumps and HMV motors are helping Kalmar’s new RT022 Light Capacity Rough-Terrain Telescopic Forklifts operate reliably and maneuver precisely through difficult terrain. Featuring an automotive drive control, or DuraForce CA control, the pumps and motors enable smooth and repeatable vehicle motion, making ground speed ...


    By Eaton Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you