soil auger News

  • AMS Frozen Soil Powered Auger Kit - Hot Deal

    The AMS Frozen Soil Powered Auger Kit was designed to core through those dreaded frozen soil conditions. The Core Barrel Auger is equipped with carbide cutting teeth that are specifically designed to chew through tough frozen soil and pull relatively undisturbed cores inside the barrel. Take core samples down to a depth of 3ft. The extensions are connected with hex quick pins, so no more fussing ...

  • AMS Frozen Soil Powered Auger Kit - Hot Deal

    The AMS Frozen Soil Powered Auger Kit was designed to core through those dreaded frozen soil conditions. The Core Barrel Auger is equipped with carbide cutting teeth that are specifically designed to chew through tough frozen soil and pull relatively undisturbed cores inside the barrel. Take core samples down to a depth of 3ft. The extensions are connected with hex quick pins, so no more fussing ...

  • IET adds to the largest AMS DPT/Auger Fleet with the New VTR-9580

    Built with the 73 HP Tier 4 Kholer Diesel Engine, this unit is emissions compliant in all 50 States. The 5,000 ft-lb of torque auger and the adjustable 350 lb DPT hammer make this the most capable DPT rig available. Innovative Environmental Technologies, Inc. (IET) is pleased to announce our newest Direct-Push Auger Rig will be displayed at Groundwater Week in Las Vegas. AMS (Booth 421) ...

  • AMS Compacted Soil Sampling Kit

    Save time and energy in soil conditions where soil probes & slide hammers just won’t get the job done! The AMS Compacted Soil Sampler works great for obtaining “composite” soil samples in hard compacted and frozen soils. The 1-1/16” x 21” Flighted Auger with carbide bit may be connected to any ½” chuck drill. The entire unit assembles/disassembles in ...

  • F4 Field Services Completes First Soil Treatment

    F4 Field Services is proud to have completed its first soil treatment in Northern Alberta. 1100 cubic meters of contaminated soil was treated exsitu with F4's "Earth Cleaning Machine". It was a challenging first job as there were many rocks some over 100 lbs that were treated along with the contaminated soils. The F4 team also did a small insitu treatment by hand augering over 50 holes near a ...


  • New Soil Moisture and Temperature Sensor from Delta-T Devices – the SM150T

    The new SM150T Sensor is ideal for measuring moisture content and temperature in soils and substrates. It has a wide range of applications across science, horticulture and agriculture, and is a reliable and cost-effective sensor for system integrators, who appreciate its ease of installation and simple interface (0 – 1 V DC output). The SM150T’s advanced patented electronics and ...


    By Delta-T Devices Ltd.

  • AMS is producing more than just soil sampling equipment

    Top of the line products are not the only thing that AMS produces. They also produce smiles on the faces of United States Troops overseas. The holidays can be lonely for U.S. troops, but it can also be immensely joyful when they know they have love and support from back home; not just from friends and family, but from complete strangers. AMS is a homegrown company in small town America. Even ...

  • The EQ3 Equitensiometer: a new advanced soil water potential sensor from Delta-T Devices

    The new EQ3 Equitensiometer from Delta-T Devices uses class leading ThetaProbe technology to avoid the many problems of water-filled tensiometers. It is maintenance free and measures water potential (matric potential) in the range 0 to -1000 kPa. It provides an accurate loggable output ...


    By Delta-T Devices Ltd.

  • ASTM D7100 - 11 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    1. Scope 1.1 This test method covers hydraulic conductivity compatibility testing of saturated soils in the laboratory with aqueous solutions that may alter hydraulic conductivity (for example, waste related liquids) using a flexible-wall permeameter. A hydraulic conductivity test ...


    By ASTM International

  • 7 reasons why you need to meet us at NGWA Expo 2014

    Royal Eijkelkamp's companies Eijkelkamp Agrisearch Equipment and SonicSampDrill will be present at NGWA Expo 2014 (December 9th - 12th | Las Vegas | USA). Visit booth 1221 for the following 7 reasons: Eijkelkamp Agrisearch Equipment ...


    By Eijkelkamp Soil & Water

  • WRScompass Wins Six Geotechnical Remediation Projects

    Treating various media and utilizing site specific treatment chemistry and mixing methodologies Tampa, Florida. WRScompass announced today that it has been awarded multiple Geotechnical Remediation projects at six project sites in Connecticut, New Jersey, Georgia, and Maryland. They include In-situ Stabilization (ISS) and Hydraulic Barrier Wall (HBW) Construction at environmentally impacted ...


    By WRScompass

  • MIXED IN-SITU & EX-SITU PROJECT SUCCESS

    Envirotreat Ltd have recently undertaken remedial works at an operating gas governor station to the north of Manchester (UK), that had previously used as a full gas production facility. The voluntary remediation project formed part of the comprehensive programme being undertaken by the Client at a number of old gas production sites across the North West of England. The first phase of the ...


  • New Life for Contaminated Land in Croydon UK

    Contaminated land remediation specialist Envirotreat are currently undertaking the installation of a Soil Mixed Reactive Barrier System (SMRBS) at a former coal gasification site in Croydon UK for Barratt (Kent) in what will form a forward thinking and exciting new site 5.3ha combined Commercial and Residential property project. Working alongside Piling Contractor Miller Piling and Consultant ...


  • ASTM D6063 - 11 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

    1. Scope 1.1 This guide covers information, including flow charts, for field personnel to follow in order to collect samples from drums and similar containers. 1.2 The purpose of this guide is to help field personnel in planning and obtaining samples from drums and similar containers, using equipment and techniques that will ensure that the ...


    By ASTM International

  • Withdrawn Standard: ASTM D420-98(2003) Standard Guide to Site Characterization for Engineering Design and Construction Purposes (Withdrawn 2012)

    This guide refers to ASTM methods by which soil, rock, and ground water conditions may be determined. The objective of the investigation should be to identify and locate, both horizontally and vertically, significant soil and rock types and ground water ...


    By ASTM International

  • “Our Planet” show to feature Therma-Flite

    The producers of Our Planet are pleased to announce that Therma-Flite will be featured in an upcoming episode as part of the show’s series on Environmental Impact. Therma-Flite has a long history of screw conveyor technology and auger design, manufacturing equipment for chemical and process industries all over the world. The “Bio-Scru” is an application of this technology which was originally ...


    By Therma-Flite Inc.

  • Delta-T launches new digital SDI-12 version of the PR2 Profile Probe

    Delta-T Devices has launched a new digital version of their well-established analogue PR2 Profile Probe. Named the PR2 SDI-12, it shares the many strengths of the analogue version (which remains in production), but with the addition of SDI-12 compatibility – allowing integration into new and existing SDI-12 systems. As with the analogue version, the new version comes in two lengths – ...


    By Delta-T Devices Ltd.

  • ASTM D6009 - 12 Standard Guide for Sampling Waste Piles

    This guide is intended to provide guidance for sampling waste piles. It can be used to obtain samples for waste characterization related to use, treatment, or disposal; to monitor an active pile; to prepare for closure of the waste pile; or to investigate the contents of an abandoned pile. Techniques used to sample include both in-place evaluations of the ...


    By ASTM International

  • ASTM D6066 - 11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    Normalization of penetration resistance data is a frequently used method to evaluate the liquefaction susceptibility of sands. A large case history database from many countries has been accumulated to estimate instability of saturated sands during earthquakes (1,2,3,4). This test is used extensively for a great variety of geotechnical exploration programs where ...


    By ASTM International

  • New model in the Big Hanna range - model T480

    We are very pleased to announce that we now have extended our range of Big Hanna models.Many customers are looking for a solution to compost their food waste on-site having more food waste than our T240 model can handle. Our new Big Hanna composter is called model T480 and has a capacity of 800-2400 kg food waste per week. Used together with a ...


    By Susteco AB

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you