solar-operated pump News

  • Colfax fluid handling delivers bitumen pumps to Russia

    In June of 2012, Colfax Fluid Handling delivered a package of 21 Allweiler screw and centrifugal pumps for a bitumen production facility in Russia. The pumps are an important part of the plant, which is located in Novoshakhtinsk (Rostov region) and produces bitumen according to the "Biturox" process from Vienna-based Pörner Ingenieurgesellschaft mbH. The thirteen Allweiler screw pumps of the ...


    By ALLWEILER GmbH

  • Allweiler pumps are ready for low-sulfur diesel in ships

    (Radolfzell/Germany) Allweiler AG, a member of Colfax Corporation, is already delivering fuel pumps that are adapted for use with new low-sulfur diesel oil. The company employs an analytical program that shows conversion options or suitable replacements for pumps that are already in service. National and international regulations now require low-sulfur fuels, especially in coastal areas and while ...


    By ALLWEILER GmbH

  • Pumps contribute to cost savings and boost production

    Cost Saving Pumps in South Africa Supplier of pumps and accessories Verder Pumps South Africa (VPSA) says that the use of the VF125 pump range contributes to cost savings and increased productivity at platinum mines. This was seen at a precious-metal producer’s concentrator upgrade project, near Rustenburg, where VPSA was required to upgrade the thickener transfer pumps for ...

  • Grundfos launches wastewater pump with unique technology

    S-tube offers a combination of new technology, high efficiency and reliable operation. Today, the pump is presented at the IFAT wastewater fair. The new S-tube is the answer to a major challenge. So far, wastewater pumps have been a compromise between free passage to obtain reliable operation and high efficiency to obtain low operational costs. Grundfos now uses a completely new ...


    By Grundfos

  • Intelligent pump monitoring from Colfax Fluid Handling

    Colfax Fluid Handling, a business segment of Colfax Corporation (NYSE: CFX) will demonstrate its commitment to Industry 4.0 by with an exhibit of its new intelligent platform for condition and operation monitoring at Hanover Fair. Known as IN-1000, it will be on display at "Pumpe DE PUMPplaza" (Hall 15, Booth G43). The platform was developed specifically for Allweiler pumps that are used in ...


    By Colfax Corporation

  • Major order for All-Optiflow progressing cavity pumps

    Colfax Fluid Handling will deliver 36 units of Allweiler's new All-Optiflow series of pumps for the large Ambarli sewage plant near Istanbul. These progressing cavity pumps move sludge and exhibit very high energy efficiency. Their capacity is up to twice as high as conventional pumps. All-Optiflow pumps are suitable for moving virtually any liquid, including those that contain fibers and solids. ...


    By ALLWEILER GmbH

  • New screw pump from Colfax Fluid Handling

    Colfax Fluid Handling, a business of Colfax Corporation (NYSE: CFX), will in June begin deliveries of a new screw pump for lubricating liquids. The new series covers a wide capacity range with a variety of installation variations. The pumps are suitable even for rough operating conditions. The new "CFH M" series is ideal for pumping all types of lubricating liquids like lubricating and hydraulic ...


    By ALLWEILER GmbH

  • The advantage of CNC grinding machine in pump Processing

    CNC grinding machine is a machine tool used to sharpen milling cutters and tool bits. These machines are used widely in parts processing of various industries, including oil pump industry. Auto part usually requires high precision and high reliability. Manufacturing of pump bearing parts with CNC grinding machine could gain the following advantages: 1. Along with vibration stress release, ...


  • The advantage of CNC grinding machine in pump Processing

    CNC grinding machine is a machine tool used to sharpen milling cutters and tool bits. These machines are used widely in parts processing of various industries, including oil pump industry. Auto part usually requires high precision and high reliability. Manufacturing of pump bearing parts with CNC grinding machine could gain the following advantages: 1. Along with vibration stress release, ...


  • Extra pumps swing into action on the Somerset Levels

    The Environment Agency is stepping up its pumping operations on the Somerset Levels. Working in close partnership with Somerset County Council, local authorities and emergency services, additional pumps have been brought in to maximise the amount of floodwater that can be pumped away from the Somerset Levels and Moors. This will include increasing the volume of floodwater that goes down the Sowy ...

  • Record speed and accuracy achieved with single-electron pumps

    The National Physical Laboratory (NPL), in collaboration with NTT (Nippon Telegraph and Telephone Corporation) in Japan, has measured silicon single-electron pumps with the highest speed and accuracy ever achieved, paving the way towards practical primary standards for electric current. NTT's silicon nanodevice technology pushed the ...

  • NGWA seeks ANSI Standard for Pumping Systems

    The National Ground Water Association is seeking people to form a consensus body for developing a proposed groundwater pumping systems standard to include guidance on performance requirements for pumps used in water wells. A standard is a formal technical document for generally accepted processes, procedures, and policies. NGWA is seeking establishment of standards to protect groundwater ...

  • New generation of pumps and skimmers ideal for landfill market

    Abanaki Corporation (www.abanaki.com), the world leader in oil skimming solutions, announces a new technology added to its groundwater remediation systems line. This new product line will include the PetroXtractor Active Membrane Skimmer, PetroXtractor Passive Membrane Skimmer, and Leach-Aid Landfill Pump, intended for use in remediation and leachate ...


    By Abanaki Corporation

  • Thompson Pump supports Haiti relief efforts

    Thompson Pump & Manufacturing Co., Inc., a full-service manufacturer and provider of pumps, pumping equipment and engineering expertise, is aiding disaster relief efforts in Haiti with company-wide monetary donations and supplies. The pumps are being made available to the U.S. government and its aid agencies, which are aiding in the relief effort on the Caribbean island. Donations have been ...


    By Thompson Pump

  • Landia’s Chopper pumps put Crittenden debris in detention

    Knives and forks, latex gloves, grease, potato chip wrappers, drug balloons and condoms – just some of the harsh media being successfully dealt with by Landia’s relentless Chopper Pumps at the 144-bed Crittenden County Detention Center. Home to some of the most troubled teenagers in Western Kentucky, the Detention Center chose two 9HP Landia Chopper Pumps for their ability to handle ...


    By Landia

  • Miniature Rotary Vane Pump with New Brushless Motor

    Miniature rotary vane pumps are chosen wherever lowest pulsation and/or compact size in combination with high flow at lower pressure/vacuum is needed. Applications are various and can be found in medical, environmental and industrial applications, such as prevention of DVT (deep vein thrombosis) with a portable device, portable particle counters or marking and coding printers. Forced by the ...


    By Gardner Denver Thomas GmbH

  • KSB invests €40m in new German pump factory

    The foundation stone for a new production shop costing around €40m has been laid at KSB’s Frankenthal factory. The reason for the investment is the worldwide trend towards power station units with outputs of up to 1000 MW. In order to achieve a high efficiency in power station units of this magnitude, the plants operate at very high pressures and temperatures. There has not been much demand ...


    By KSB Group

  • Solenoid Driven Metering Pump gamma/ X

    The new solenoid diaphragm metering pump gamma/ X is user-friendly and has an outstandingly long service life, just like its predecessor. An ingenious solenoid control measures the back pressure and protects the system from overload. This technology makes a pressure sensor superfluous, meaning that operating safety can be significantly increased: no additional parts come into contact with the ...

  • We`re Pumped to See You at the NWFPA!

    Cornell Pump is excited to be exhibiting at the Northwest Food Processors Association, and invite you to stop by Booth 937! We'll have our hydro transport food pumps, innovative trash/self-priming pumps, and reliable refrigeration pumps on display in our booth. We look forward to you stopping by and seeing our all new Arctic King line of refrigeration pumps. This robust hermetic line operates ...


    By Cornell Pump Company

  • ADS Spider-Q pump station monitoring and alarming

    ADS® LLC today announces the new ADS Spider-Q™, an easy-to-use, place-anywhere volumetric quantification system. Backed by ADS and over 33 years of flow monitoring expertise, the ADS Spider-Q is designed specifically for pump station monitoring and alarming. It features wireless data access, automatic data delivery, influent and effluent flow calculation, alarming, and reporting. “The technology ...


    By ADS Environmental Services

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you