solids dewatering News

  • Filter Press Draco, excellence in dewatering

    Maximum dewatering and dry solids production, large filtration area in a short space, automatic control system, low chemical consumption, after-sales technical assistance. Process flexibility-easily accommodates fluctuating inlet consistency. User friendly-simple, safe & reliable operation. Capable of operating in fully automatic, FPA, semi-automatic, FPSA, completely in manual mode, FPM and ...


    By Toro Equipment S.L.

  • MSE Hiller offering sludge dewatering

    MSE Hiller specialise in the supply of High performance sludge dewatering equipment to the Water and Wastewater treatment Industries. Effluents may be clarified and sludges dewatered or thickened using Hiller centrifuges at process rates of 1 to 150 m3/hr. A fleet of mobile hire units, some with lime stabilisation plants, are available to rent for temporary sludge dewatering duties at cusomers’ ...


    By MSE Hiller Limited

  • Next evolution in dewatering technology : Xelletor series

    Our C series already sets the benchmark in the centrifugal dewatering of sewage sludge. The brand-new Xelletor series raises the bar for mechanical separation processes to an entirely new level. The centrifuge will provide significantly better dewatering performance with lower consumption. Sewage sludge dewatering has enormous savings potential for sewage treatment plant operators. The advantage ...


    By Flottweg SE

  • Aquatech dewatering expands services into Newfoundland and Labrador

    Aquatech Dewatering Company and Aquatech Pump and Power announced that they are expanding their services to the Canadian East Coast and plan to open a full service branch in Newfoundland this year. Aquatech currently is an exclusive distributor of Godwin Pumps, Hudig Pumps and Dragflow Pumps. Aquatech is a fast growing, full service provider of dewatering services in the mining and construction ...


    By Aquatech Dewatering Company

  • Aquatech Dewatering Expands Services Into Newfoundland and Labrador

    Aquatech Dewatering Company and Aquatech Pump and Power announced that they are expanding their services to the Canadian East Coast and plan to open a full service branch in Newfoundland this year. Aquatech currently is an exclusive distributor of Godwin Pumps, Hudig Pumps and Dragflow Pumps. Aquatech is a fast growing, full service provider of dewatering services in the mining and construction ...


    By Aquatech Dewatering Company

  • Compactor dumps, perforates, dewaters, crushes, and bales.

    February 27, 2013 - Used for processing full plastic or aluminum liquid containers, X3Cycler features stainless steel construction and can process up to 30 yd³ or 1,200 lb/hr of plastic or aluminum containers with volume reductions of up to 95%. Dual 8 in. bore hydraulic cylinders develop up to 250,000 lb of force. Designed to accept Gaylords or plastic totes of ...


    By Sebright Products, Inc.

  • IMS Introduces GeoPool Dredge Dewatering Technology

    IMS is pleased to announce the acquisition of a patent pending state-of-the-art dewatering technology that is inexpensive, reusable, scalable, and does not require polymers. The technology was invented by an IMS Versi-Dredge customer and then successfully trialed in the United States and Europe. IMS recently sold several GeoPools to a customer in the U.S.   ...

  • Aquatech dewatering expands services into newfoundland and labrador

    Aquatech Dewatering Company and Aquatech Pump and Power announced that they are expanding their services to the Canadian East Coast and plan to open a full service branch in Newfoundland this year. Aquatech currently is an exclusive distributor of Godwin Pumps, Hudig Pumps and Dragflow Pumps. Aquatech is a fast growing, full service provider of dewatering services in the mining and construction ...


    By Aquatech Dewatering Company

  • Moyno 2000 HS System effectively handles dewatered sludge cake

    Moyno, Inc. offers the 2000 HS System as the cost-effective alternative to expensive, high-maintenance piston pumps and open conveyors for dewatered sludge transfer in municipal wastewater treatment. It features an integral hopper with a twin-screw auger feeder and Moyno G4 progressing cavity pump that efficiently handles semi-dry, high solids, dewatered municipal sludge to over 50 percent ...


    By Moyno, Inc.

  • JC Enviro Expands Business with CDEnviro Mobile Dewatering Unit

    CDEnviro’s mobile dewatering unit is another step that JC Enviro has taken recently to significantly expand their business. With the purchase of CDEnviro’s mobile G:MAX, they will be able to significantly reduce their landfill burden. Established in 2006, JC Enviro is a known and well-established family business in County Monaghan since the founding in 2006 by father and son, John and ...


    By CDEnviro

  • Comparison of Gypsum Dewatering Technologies at Flue Gas Desulfurization Plants

    Keywords Flue gas desulfurization plants, wet systems, gypsum dewatering, gypsum recovery, vacuum belt filters, environmental, coal-fired power plant equipment, new technology for coal-fired power plants Abstract Recovering gypsum from flue gas desulfurization (FGD) plants is becoming more important as the technical feasibility of substituting FGD gypsum for ...


    By BHS-Sonthofen Inc.

  • Moyno 2000 HS System Technology Targets Dewatered Sludge Cake

    The Moyno 2000 HS system is a significant technology advancement for the wastewater treatment industry. It can pump filter cake further distances with higher volumetric efficiencies than any other progressing cavity pump. Its twin-screw feeder supplies a constant, pressurized feed rate to the pump resulting in a 100 percent pump cavity fill rate. The Moyno 2000 HS System features an integral ...


    By Moyno, Inc.

  • Moyno 2000 HS System effectively handles dewatered sludge cake

    Moyno, Inc. offers the 2000 HS System as the cost-effective alternative to expensive, high-maintenance piston pumps and open conveyors for dewatered sludge transfer in municipal wastewater treatment. It features an integral hopper with a twin-screw auger feeder and Moyno G4 progressing cavity pump that efficiently handles semi-dry, high solids, dewatered municipal sludge to over 50 percent ...


    By Moyno, Inc.

  • New Sludge Dewatering Press -Reduction in Total Cost by 30%!

    Long-awaited Appearance of New Volute Dewatering Press-The New Model Exhibited in “NEW Environment Expo 2011” Held in Tokyo Big Sight- AMCON INC. (Headquarters: Yokohama, Kanagawa, CEO: Shoichi Sasaki), manufacturing and selling of sludge treatment equipment, is going to start sell the new model sludge dewatering equipment “Volute VDC-121 Model” from May 24th, 2011. The ...


    By AMCON Inc.

  • The new BA100K – introducing the world’s best performing 4` dewatering pump set!

    BBA Pumps proudly announces the launch of the new BA100K - a diesel driven 4” solids handling pump - the world’s best in class mobile pump set. This new BA100K is a product born from the BBA company philosophy for the lowest cost of ownership and the desire to protect the environment. The unit guarantees the best pumping performance combined with the lowest cost of maintenance and ...


    By BBA Pumps

  • Xylem launches powerful new Flygt and Godwin dewatering pumps at Bauma 2013

    Xylem Inc. (NYSE: XYL), a leading global water technology company focused on addressing the world’s most challenging water issues, will launch powerful new dewatering pumps under its Flygt and Godwin brands at the Bauma trade show in Munich, Germany this week. Xylem will unveil a new series of submersible dewatering pumps modeled on its iconic and popular Flygt BIBO pump. The company will ...


    By Xylem, Inc.

  • The next evolution in dewatering technology - The new Flottweg Xelletor Series

    Our C series already sets the benchmark in the centrifugal dewatering of sewage sludge. In May 2018, Flottweg will go further. The brand-new Xelletor series will raise the bar for mechanical separation processes to an entirely new level. The centrifuge will provide significantly better dewatering performance with lower consumption. ...


    By Flottweg SE

  • Dilute Stream Solid-Liquid Separations Using Continuous Vacuum Filtration Technologies

    Abstract: Continuous solid-liquid separation, by vacuum or pressure, are integral components of a processing scheme to produce energy from algae, biomass or other types of slurries. In solid-liquid separation systems, there are a wide variety of parameters that influence their performance. These include, for example, particle size and shape, type of particle (i.e. soft, gelatinous, discrete), ...


    By BHS-Sonthofen Inc.

  • PEWE Internally Fed Screen and Auger Removes Filterable Solids

    BrucePac meat designer is a national supplier revered for some of the most innovative protein products.  BrucePac clients are food manufacturers, food service distributors, and retailers. They offer a range of choices, cooking options with exciting flavors and broad packaging possibilities. ...

  • Integrated Engineers Releases Report Determining The True Costs of Liquid Solids Separation

    Integrated Engineers develops cost factors for determining the true costs of liquid solids separation used to clearly define the true operational costs of each wastewater treatment facility and the facility’s potential for cutting costs. Cost Factors for Liquid/Solids Separation Each of these points should be used to clearly define the true operational costs of each wastewater treatment ...


    By Integrated Engineers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you