stack emissions monitoring analyser News

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • AMETEK Land to Attend Emissions Monitoring Conference and Exhibition in India

    AMETEK Land will exhibit at CEM India Emissions Monitoring Conference and Exhibition, September 26-28, 2017 in New Delhi, India.    AMETEK Land will demonstrate its range of high-accuracy opacity and particulate matter (PM) monitors, and portable gas analysers, that detect carbon monoxide, sulfuric acid and, multiple gases.    At the ...


    By AMETEK Land

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • Training Courses Are a ‘Must’ for Those Involved with Continuous Emissions Monitoring

    Untitled Document Following positive feedback from its students Enviro Technology, the UK’s leading exporter of environmental ...

  • Enviro Technology seminar to showcase advanced industrial air emission monitoring techniques

    Enviro Technology, one of the UK’s leading air quality monitoring specialists, is holding a free-of-charge seminar on Tuesday 8 November at the Sheraton Heathrow Hotel, in conjunction with PCME Ltd, to highlight best practice techniques for industrial air emissions and industrial air emission monitoring techniques. This event is a rescheduling of the seminar which had been due to take place ...

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • ET MARINE’S SEANOX ANALYSER GETS DNV ENDORSEMENT

    Untitled Document ET Marine’s compact SeaNox analyser – which measures oxides of nitrogen (NOx) emitted from a ship’s stack – has just been granted a prestigious Det Norske Veritas (DNV) ...

  • PCME launch a new range of QAL1 certified continuous particulate emission monitors

    PCME Ltd (part of Environnement S.A Group), a global leading specialist in the development, manufacture and supply of continuous particulate emission and flow monitors, introduce a new range of Backscatter Particulate Emission Monitors designed to meet global demands for quality […] ...


    By Environnement S.A

  • Helping Industry Reduce Carbon Emissions.

    Climate change and the need to decrease greenhouse gases has become an important global, political and social issue. Many governments are developing new legislation regarding carbon trading and carbon permits. Regulation alone will not solve the issue of greenhouse gas emissions. An effective response to the climate change challenge requires action by everyone - governments, businesses and the ...


    By Ecotech Pty Ltd

  • Perfect Timing for Air Quality and Emissions

    PCME look forward to participating at the forth coming Air Quality and Emissions Show (AQE 2017) at the Telford International Centre, UK on 24th and 25th May. The new QAL 360 Backscatter PM CEM and DUST ALARM 40 Continuous Filter Performance Monitor will be demonstrated on Stand 47. Also on display will be the latest range of Velocity monitors: the ...


    By Environnement S.A

  • The Air Quality & Emissions Show Gallery

    Protea exhibited at the Air Quality and Emissions Show in Telford on May 24th to 25th at stand numbers 13 & 14. This was the 9th Air Quality & Emissions exhibition and focused on industrial emissions and stack monitoring.  ...


    By Protea Limited

  • PCME launch a new range of QAL1 certified Continuous Particulate Emission Monitors using Backscatter technology

    PCME Ltd, a global leading specialist in the development, manufacture and supply of continuous particulate emission and flow monitors, introduce a new range of Backscatter Particulate Emission Monitors designed to meet global demands for quality measurement in low to high dust concentrations. Engineered with single side stack mounting and with full audit capability, the QAL 260 and QAL 360 range ...


    By PCME Ltd

  • a1-cbiss to Exhibit New Multi-Gas Analyser at RWM

    a1-cbiss will be promoting an MCERTS certified CEM system at RWM plus the latest Ankersmid Gas Conditioning Components RWM in partnership with CIWM is Europe’s premier event dedicated to resource efficiency and waste management solutions. The event is shaped around the demands of this rapidly growing sector and spans each element of the waste hierarchy. a1-cbiss will be present once again ...


    By a1-cbiss

  • Fingerprinting emissions from waste incinerators

    The use of MWIs to dispose of materials such as plastic, glass and food waste is increasing in the UK due to EU restrictions on the use of landfill. The European Industrial Emissions Directive, which aims to protect the environment and human health, imposes strict limits on emissions of heavy metals and other pollutants from MWIs. However, the impact of MWI emissions on ambient air pollution is ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you