stack emissions monitoring gas analyser News

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • a1-cbiss to Exhibit New Multi-Gas Analyser at RWM

    a1-cbiss will be promoting an MCERTS certified CEM system at RWM plus the latest Ankersmid Gas Conditioning Components RWM in partnership with CIWM is Europe’s premier event dedicated to resource efficiency and waste management solutions. The event is shaped around the demands of this rapidly growing sector and spans each element of the waste hierarchy. a1-cbiss will be present once again ...


    By a1-cbiss

  • FTIR gas monitoring seminar a huge success

    Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications. The event took place at Bletchley Park and drew a large audience from a wide variety of industries including construction, industrial controls, Environment Agency, education, research, consultancies, test houses, hospitals, police, DSTL, Health & ...


    By Quantitech Ltd

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • Helping Industry Reduce Carbon Emissions.

    Climate change and the need to decrease greenhouse gases has become an important global, political and social issue. Many governments are developing new legislation regarding carbon trading and carbon permits. Regulation alone will not solve the issue of greenhouse gas emissions. An effective response to the climate change challenge requires action by everyone - governments, businesses and the ...


    By Ecotech Pty Ltd

  • Emissions regulations theme for MCERTS 2011

    MCERTS 2011 has moved to the Telford International Centre and will take place on 30th and 31st March. The new location will accommodate growth in demand for the latest information on the regulations, techniques, standards and technologies that relate to emissions monitoring and gas detection. The event's visitors will be provided with help and advice across a broad range of subjects including the ...

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • Abitibi Bowater chooses Kittiwake procal analyser for biomass plant

    Abitibi Bowater, the eighth largest publicly traded pulp and paper manufacturer in the world, has employed Kittiwake Procal’s continuous emissions monitoring system (CEMS) on its Northern Ontario paper and pulp mill. Secured in conjunction with Kittiwake Procal’s Canadian distributor, Hydroflo, the Kittiwake Procal solution fought off competition from extractive systems. Abitibi ...

  • ET Attendance at the Air Quality & Emissions Show

    Leading UK Air Quality Monitoring & Continuous Emissions Monitoring Specialists, Enviro Technology Services Plc (ET) will be exhibiting at the AQE Conference & Exhibition on Stands 5 & 6. Our experts will be on hand to discuss, present and explain our cutting-edge technology for a wide range of applications including air quality, CEMS and atmospheric chemistry and scientific research. ...

  • Gasmet’s latest monitors on display at Achema

    Leading gas analyser manufacturer Gasmet Technologies Oy (Finland), has announced its participation in the Achema 2012 exhibition (Frankfurt, 18 – 22 June). The latest gas monitoring technology will be on display at stand C49 in hall 11.1 (Instrumentation, Control and Automation Techniques) including the new Gasmet DX 4040 – a unique portable FTIR analyser that enables the measurement ...


    By DECHEMA Ausstellungs-GmbH

  • Gasmet’s latest monitors on display at Achema

    Leading gas analyser manufacturer Gasmet Technologies Oy (Finland), has announced its participation in the Achema 2012 exhibition (Frankfurt, 18 – 22 June). The latest gas monitoring technology will be on display at stand C49 in hall 11.1 (Instrumentation, Control and Automation Techniques) including the new ...


    By Gasmet Technologies Oy

  • Ship Exhaust Monitoring

    Untitled Document Enviro Technology can provide cost-effective solutions to the problems of monitoring ship exhaust emissions. ...

  • Individual power stations’ emissions can be identified from a distance

    Air pollutants and greenhouse gases (GHGs) from a coal-fired power station have been correctly identified 12 km away, researchers report in a new US study. Their monitoring method paves the way for a space-based satellite system which can check emissions reported by individual power stations against actual emissions. It is challenging to check the accuracy of emissions reported by nations under ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you