Stack Emissions Sampling Equipment News on Environmental XPRT

Stack emission monitors are ‘future-proof’, says Quantitech

Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...

Feb. 19, 2009

By Quantitech Ltd

ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...

Jan. 10, 2012

By ASTM International

ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...

Jan. 12, 2012

By ASTM International

ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...

Jan. 12, 2012

By ASTM International

Energy from waste: new stack emissions monitoring systems

Incineration plants are subject to the obligation to comply with stringent pollution standards; analysis equipment must operate in continuous in harsh environmental conditions. Thus, the Tees Valley incinerator in Billingham, UK, newly equipped 3 lines with ...

May 9, 2014

By Environnement S.A

New portable heated FID for stack testing

The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...

May 14, 2009

By J.U.M. Engineering GmbH

Curing carpet underlay emissions

The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...

Feb. 21, 2011

By Quantitech Ltd

Gas Sampling Probes for Every Application

Gas sampling specialists JCT presents a complete portfolio of gas sampling probes with a new set of technical brochures available on the company’s website. Beyond the wide range of gas sampling probes for typical gas analysis applications like continuous emission monitoring (CEMS) JCT is well known for its flexibility in building reliable solutions also for demanding applications like NOx ...

Jan. 10, 2017

By JCT Analysentechnik GmbH

Emissions regulations theme for MCERTS 2011

MCERTS 2011 has moved to the Telford International Centre and will take place on 30th and 31st March. The new location will accommodate growth in demand for the latest information on the regulations, techniques, standards and technologies that relate to emissions monitoring and gas detection. The event's visitors will be provided with help and advice across a broad range of subjects including the ...

Mar. 2, 2011

By Environmental Technology Publications Ltd

ET Attendance at the Air Quality & Emissions Show

Leading UK Air Quality Monitoring & Continuous Emissions Monitoring Specialists, Enviro Technology Services Plc (ET) will be exhibiting at the AQE Conference & Exhibition on Stands 5 & 6. Our experts will be on hand to discuss, present and explain our cutting-edge technology for a wide range of applications including air quality, CEMS and atmospheric chemistry and scientific research. ...

Apr. 8, 2015

By Enviro Technology Services Ltd

$3 billion market for air pollution monitoring, sampling and process control

The world market for stack continuous emissions monitors (CEMs) will be $900 million this year. However, if one takes into account the additional revenues for ambient monitoring systems, intermittent stack sampling and process control using pollutant analyzers, the market is above $3 billion. This is the latest forecast in the McIlvaine Air Pollution Monitoring and Sampling World Markets. Some ...

Feb. 4, 2011

By The McIlvaine Company

Apex Instruments releases the XC-260 Meter Console for mercury emissions

Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...

Feb. 7, 2007

By Apex Instruments, Inc.

Cemtrex Markets Its New Multiplexed Emissions Monitoring System

Cemtrex, Inc.'s (OTC: CTEI) new Multiplexed Emissions monitoring systems find worldwide acceptance and approvals by multinational engineering companies as well as original equipment manufacturers around the globe. This system termed "IntelliCEM" is designed to sample multiple stacks and provide a very cost-effective solution for process and emissions reporting. Conventional systems require ...

Dec. 9, 2011

By Cemtrex Inc. - Monitoring Instrument & Products Division

ERG helps Crown Pet Foods deliver improvements in odour emissions

ERG (Air Pollution Control) Ltd announces the successful installation of a new odour control plant at Crown Pet Foods as part of a £1m plus investment in upgraded odour control at their Castle Cary, Somerset, factory.Crown Pet Foods, who are owned by the global group Royal Canin, completed a new state-of-the-art pet food production facility at Castle Cary in late 2007. Although the facility ...

Nov. 7, 2008

By ERG (Air Pollution Control) Ltd

Gas Conditioning Made Easy

The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...

Aug. 1, 2014

By a1-cbiss

Walter Smith and Associates Workshop

Walter Smith, PE, BCEE, is an expert in Air Pollution Source Sampling. He is considered the "Grandfather of Stack Sampling". Walter Smith has been conducting stack sampling training courses since 1969. Since leaving EPA in 1972, he has conducted and continues to conduct Source Sampling Workshops every year. Source Sampling & CEMS Workshop Schedule ...

Mar. 16, 2012

By Apex Instruments, Inc.

Certification boosts demand for FTIR multigas analyser

Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...

Sep. 16, 2014

By Quantitech Ltd

CEMS market exceeds US$1 billion - Biggest Single Market Coal-fired Boilers in Asia

The world market for continuous emissions monitors (CEMS) for ambient as well as stack applications will exceed US$1 billion/yr by 2012. This includes the analyzers, software and accompanying service revenues. An additional US$1 billion/yr will be spent for intermittent stack sampling. An even larger market will be created for optimization systems which integrate the signals of emissions ...

Sep. 8, 2010

By The McIlvaine Company

Continuous Mercury Monitoring with State-of-the-Art Technology = Gasmet CMM

With the introduction of ever tightening legislation for emissions, new challenges are also facing the equipment that is used for continuous monitoring of trace pollutants. In the United States, the Clean Air Mercury Rule will establish strict limits for Mercury emissions from coal-fired power plants. Gasmet Technologies decided to meet this challenge with a novel approach together with the ...

Feb. 5, 2007

By Gasmet Technologies Oy

AQE 2015 Conference details announced

The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive conference programme for the event which will take place in Telford, UK, on 22nd and 23rd April. Organiser Marcus Pattison says: “The event could not have been better timed. Just before Christmas, the UK Government issued a consultation that, if adopted, could result in a dramatic ...

Jan. 20, 2015

By Environmental Technology Publications Ltd

Subscribe to our eBulletins

Add Supplier Profile