stack emissions test News

  • New portable heated FID for stack testing

    The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...


    By J.U.M. Engineering GmbH

  • New White Paper on FTIR multigas analysis

    Gasmet Technologies (Finland) has announced the publication of a free White Paper on the simultaneous measurement of multiple gases in a wide variety of applications using FTIR (Fourier Transform InfraRed) technology. With the ability to measure almost any gas, FTIR monitoring technology is employed in an enormous variety of applications including Continuous Emissions Monitoring, Stack ...


    By Gasmet Technologies Oy

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • The Golden Gazette #1 - Air Emissions Testing Newsletter

    The first quarter of 2011 has been a busy one for the air quality world, and is appropriately the time that we are launching our Testing Services newsletter. In this charter edition, we focus on the imminent Petroleum Refinery 114 program mandated by the U.S. EPA.  In it, we desire to provide valuable insight to our clients in their efforts to carry out the complex testing efforts that this ...


    By Golden Specialty, Inc.

  • Pollutec 2014: new ultrasonic stack Flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with the European Monitoring Standard EN-16911-2. STACKFLØW 400 uses PCME*’s unique FlueSonic™ technology and mathematical measurement ...


    By Environnement S.A

  • FTIR Emission Testing - Avoiding Common Traps

    Fourier transform infrared (FTIR) technology is a powerful, versatile tool for air emissions testing, but involves a number of potential pitfalls. Obtaining high-quality, legally defensible data requires significant expertise and careful attention to a well-vetted quality management system. Golden Specialty, at the request of the Texas Commission for Environmental Quality, has evaluated several ...


    By Golden Specialty, Inc.

  • Cyclone System in Nestlé Azores has successfully passed emission tests!

    In 2014, Nestlé - Prolacto in São Miguel - Azores Islands decided to increase production of powder milk and, therefore, changing the drying flowrate from 31,000m3/h to 40,000m3/h. ACS was called to upgrade the existing Hurricane HR cyclones used for final stage dedusting (installed in 2011), as well as the fans used to extract the air from the Spray Towers passing through the ...

  • Global Technologies Group, Inc. Results of Final Mercury Emissions Testing

    Global Technologies Group, Inc. (PINKSHEETS: GTGP) presents summary report dated today for the last series of Mercury emissions testing completed by MSE Technology Applications, Inc., which was conducted to determine if any acid gases, NOX or SOX will be generated using MBS with compressed air in the test system and update on MSE Acquisition. NOx, SOx and Acid Gas Testing The same mercury ...

  • $2 billion/yr market for mercury removal from stack gases

    The market for equipment and consumables to measure and remove mercury from stack gases will average over $2 billion/yr over the next decade. This is the latest forecast in the online McIlvaine "Mercury Air Reduction Markets". There are three immediate markets, all are in the U.S.  They are cement, utility boilers and industrial boilers. Hundreds of millions of dollars has already been spent ...


    By The McIlvaine Company

  • U.S. EPA ICRs require HAP and other emissions tests on combustion units

    In early June 2009, U.S. EPA issued Information Collection Request (ICR) letters to facilities requiring hazardous air pollutant (HAP) and other emission tests on more than 300 industrial, commercial and institutional boilers and process heaters and on commercial/industrial solid waste incinerators (CISWI). The request is enforceable under Section 114 of the federal Clean Air Act. Facilities have ...


    By Custom Stack Analysis, LLC.

  • New Rack Mount Heated FID for stack testers and systems integrators

    This new Model 3-500  heated FID hydrocarbon analyzer fully complies  with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with EPA Methods 25A and 305 for the USA. As an attractive low cost alternative to the quite expensive FID analyzers of today's choices for stack emission testing and process  applications, a new, compact heated FID ...


    By J.U.M. Engineering GmbH

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • Due Diligence for Documentation Provided by Stack Testers Relative to 40 CFR, Part 75-Affected Sources

    Most large fossil fuel-fired boilers and combustion turbines used to generate electricity in the United States are required to monitor stack emissions in accordance with 40 CFR, Part 75 (Part 75).1 Stack emissions are commonly monitored directly by continuous emission monitoring systems (CEMS), although certain units qualify for indirect emission monitoring, which employs empirically derived ...


    By Golden Specialty, Inc.

  • Thermo Fisher Scientific Offers Simpler Solution to System Integrity Testing for Mercury Emissions Monitoring

    FRANKLIN, Mass. (May 9, 2007) – Thermo Fisher Scientific Inc., the world leader in serving science, announces the Model 81i MCG mercuric chloride generator, a simpler solution to the demand for weekly system integrity testing for mercury emissions monitoring at coal-fired power plants. An optional feature for new systems and a simple retrofit for installed units, the Model 81i MCG is a fully ...

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • VOC emissions data may be invalid

    Keith Golding, MD of Quantitech Limited, is urging stack testers and the managers of prescribed industrial processes to check the MCERTS certificates of their Flame Ionisation Detectors (FIDs). He says, “The FID fuel gas for which the certificate is valid is now specified so process operators should ensure, for example, that if the certificate specifies a Hydrogen/Helium mix, any compliance ...


    By Quantitech Ltd

  • PowerCell has delivered fuel cell stack as Coop in Switzerland launches distribution truck with fuel cell technology.

    The leading fuel cell company PowerCell Sweden AB (publ) has, together with Swiss Hydrogen, supplied a fuel cell system to Coop in Switzerland when the company launches Switzerland´s first distribution truck with fuel cell technology. The system is built on PowerCell S3. Today Coop in Switzerland took the first steps towards a landmark for climate-neutral mobility. At the same time ...


    By PowerCell Sweden AB

  • Emissions regulations theme for MCERTS 2011

    MCERTS 2011 has moved to the Telford International Centre and will take place on 30th and 31st March. The new location will accommodate growth in demand for the latest information on the regulations, techniques, standards and technologies that relate to emissions monitoring and gas detection. The event's visitors will be provided with help and advice across a broad range of subjects including the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you