stack gas News

  • EA Approval for Multi-gas Stack Monitor

    The Horiba PG250 is a highly popular portable multiparameter stack monitor which can simultaneously measure up to five separate gas components using IR detection for CO, SO2, and CO2; chemiluminescence for NOx; and a zirconium oxide sensor for O2 measurements. Over the past few months Quantitech has received many enquiries from users regarding the acceptability of PG250 results given that the ...


    By Quantitech Ltd

  • NOx from stack analysis

    It is now possible to calculate the NOx emissions directly from stack analysis. Several onshore facilities use stack analysis for the reporting of e.g. NOX emission. Nems Accounter now includes a calculation model for NOX emissions based on flue gas analysis. This includes an unlimited number of stacks and an unlimited number of utilities with flue gas emitted through the stacks. The emissions ...


    By add novatech

  • Is EPA stacking the deck against ethanol?

    The Renewable Fuels Association (RFA) today asserted that the Environmental Protection Agency (EPA) stacked the deck against biofuels in its process to “peer review” the agency’s indirect land use change analysis (ILUC) conducted for the Renewable Fuels Standard (RFS2) proposed rule. This morning the EPA released the much anticipated peer reviews of its lifecycle greenhouse gas (GHG) analysis and ...

  • Stack Emission Monitoring for Naval application

    Emission Monitoring system for naval application ETG 7500 Monitored Gas CO2 (NDIR) 0-25% SO2 (NDUV) 0-50 ppm Automatic calculation SO2/CO2 ratio Certification in process with RINA ETG Choose DOAS UV because it has low interferences in the application gas stream, and particularly for water vapour, the NDIR has a big influence vs autozero conditions, and ...

  • Pollutec 2014: new ultrasonic stack Flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with the European Monitoring Standard EN-16911-2. STACKFLØW 400 uses PCME*’s unique FlueSonic™ technology and mathematical measurement ...


    By Environnement S.A

  • New portable heated FID for stack testing

    The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...


    By J.U.M. Engineering GmbH

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • Mercury Removal from Exhaust Stacks and Process Gas is a Shifting Billion Dollar/yr. Market

    New technologies, geographies and regulations are creating an ever changing market for mercury removal from exhaust stacks and process gases. This is the conclusion of the McIlvaine Company in N056 Mercury Air Reduction Market. The largest application is coal-fired boilers. Natural gas purification, sewage sludge incinerators, waste-to-energy plants and other facilities are significant ...


    By The McIlvaine Company

  • Energy from waste: new stack emissions monitoring systems

    Incineration plants are subject to the obligation to comply with stringent pollution standards; analysis equipment must operate in continuous in harsh environmental conditions. Thus, the Tees Valley incinerator in Billingham, UK, newly equipped 3 lines with ...


    By Environnement S.A

  • Gas Sensors and Gas Metering Market

    ReportsnReports.com adds "Gas Sensors and Gas Metering: Applications and Markets" new market research report to its store. THIS REPORT CONTAINS An overview describing the importance of gas flow metering and gas sensors/monitors Analysis of market trends, with data from 2009, estimates for 2010, and projections of compound annual growth rates (CAGRs) ...


  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • New gas flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with ...


    By Environnement S.A

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • Gas Data Logger

    The ENMAT Lite Data Logger is a small but powerfulEthernet Data Logger unit supporting pulse outputs for a total of 3x meters. The unit support various energy types such as Electricity, Gas and Water simultaneously.  Using the pulse output of a gas meter the ENMAT Lite Data Logger stores consumption information in either Meter ...

  • New APP for gas monitoring staff

    The Gasmet APP is now available free of charge on both iOS and Android Smartphones, providing anyone with an interest in gas monitoring with quick and easy access to an enormous volume of highly useful information. The APP contains a link to a library of information on 500+ compounds providing IR spectra in addition to chemical formula, molecular weight, boiling point etc. ...


    By Gasmet Technologies Oy

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you