stack gas emissions monitoring News

  • Stack Emission Monitoring for Naval application

    Emission Monitoring system for naval application ETG 7500 Monitored Gas CO2 (NDIR) 0-25% SO2 (NDUV) 0-50 ppm Automatic calculation SO2/CO2 ratio Certification in process with RINA ETG Choose DOAS UV because it has low interferences in the application gas stream, and particularly for water vapour, the NDIR has a big influence vs autozero conditions, and ...

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Energy from waste: new stack emissions monitoring systems

    Incineration plants are subject to the obligation to comply with stringent pollution standards; analysis equipment must operate in continuous in harsh environmental conditions. Thus, the Tees Valley incinerator in Billingham, UK, newly equipped 3 lines with ...


    By Environnement S.A

  • Pollutec 2014: new ultrasonic stack Flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with the European Monitoring Standard EN-16911-2. STACKFLØW 400 uses PCME*’s unique FlueSonic™ technology and mathematical measurement ...


    By Environnement S.A

  • 4 Continuous Emission Monitoring Systems for Egypt

    The GIZA NORTH Power Plant consists of two modules: each module configured in a 2x2x1 arrangement with two Combustion Turbine Generators (CTGs), two Heat Recovery Steam Generators (HRSGs) and one Steam Turbine Generator (STG). Each module has a rated nominal capacity of 750 MW. Scope of supply: 4 (four) CEMS/Shelters, comprising each a MIR9000 with CLD option, an MVS switching system, 2 SEC ...


    By Environnement S.A

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • The Complete Portable Industrial Combustion Gas & Emissions Analyzer

    The NEW E8500 combustion analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing.  The E8500 is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. The  E8500 Also Includes: Electrochemical Sensors - 02/ CO, NO, N02/ S02, H2S NDIR Sensors - ...

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • The Complete Portable Industrial Combustion Gas & Emissions Analyzer

    The NEW E8500 combustion analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing.  The E8500 is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. The E8500 Also Includes: Wireless Communications with Computer & other Windows Devices Up to Nine Gas Sensors ...

  • New APP for gas monitoring staff

    The Gasmet APP is now available free of charge on both iOS and Android Smartphones, providing anyone with an interest in gas monitoring with quick and easy access to an enormous volume of highly useful information. The APP contains a link to a library of information on 500+ compounds providing IR spectra in addition to chemical formula, molecular weight, boiling point etc. ...


    By Gasmet Technologies Oy

  • FTIR gas monitoring seminar a huge success

    Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications. The event took place at Bletchley Park and drew a large audience from a wide variety of industries including construction, industrial controls, Environment Agency, education, research, consultancies, test houses, hospitals, police, DSTL, Health & ...


    By Quantitech Ltd

  • New Technology Helps Monitor Potentially Toxic Incinerator Emissions

    Casella ETi (UK), has installed two 'Amesa ' systems (Absorption Method for Sampling of Dioxins and Furans) at the Isle of Man 'Energy from Waste' (EfW) incinerator' - the first in the UK to have a continous dioxin sample system permanently installed. Until recently technology has not been available to accurately measure dioxin and furan emissions. Rita Greenwood, Environmental Manager at ...


    By Casella

  • New ‘How To’ video on gas monitoring App

    In 2016 Gasmet launched a free App on both iOS and Android, providing anyone with an interest in gas monitoring with quick and easy access to an enormous volume of highly useful information. The App has now been downloaded hundreds of times by people from every continent, but to help users make the most of the App’s capabilities Gasmet has now published an explanatory video, which is ...


    By Gasmet Technologies Oy

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • Industry first for Enviro Technology’s continuous Emissions Monitoring Systems

    Air quality monitoring specialists, Enviro Technology, have achieved an industry first becoming the only UK supplier of Continuous Emissions Monitoring Systems (CEMS) to meet the new, revised MCERTS certification version 3.3 for performance standards and test procedures. As part of stringent UK and European regulations, industrial companies regulated by the Environment Agency are required to ...

  • ABB emissions monitoring system helps clear the air in Chile

    The solution is a vital component in Polpaico’s efforts to reduce greenhouse gas emissions at its Cerro Blanco cement plant near Santiago and help Chile’s leading cement manufacturer improve air quality in the country’s most populous region. According to the World Health Organization, air quality in Santiago rates among the world's worst. That is largely because greater Santiago is built in a ...


    By ABB

  • New ‘How To’ video on gas monitoring App

    In 2016 Gasmet launched a free App on both iOS and Android, providing anyone with an interest in gas monitoring with quick and easy access to an enormous volume of highly useful information. The App has now been downloaded hundreds of times by people from every continent, but to help users make the most of the App’s capabilities Gasmet has now published an explanatory video, which is ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you