stack measurement News

  • Pollutec 2014: new ultrasonic stack Flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with the European Monitoring Standard EN-16911-2. STACKFLØW 400 uses PCME*’s unique FlueSonic™ technology and mathematical measurement ...


    By Environnement S.A

  • EA Approval for Multi-gas Stack Monitor

    The Horiba PG250 is a highly popular portable multiparameter stack monitor which can simultaneously measure up to five separate gas components using IR detection for CO, SO2, and CO2; chemiluminescence for NOx; and a zirconium oxide sensor for O2 measurements. Over the past few months Quantitech has received many enquiries from users regarding the acceptability of PG250 results given that the ...


    By Quantitech Ltd

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • Energy from waste: new stack emissions monitoring systems

    Incineration plants are subject to the obligation to comply with stringent pollution standards; analysis equipment must operate in continuous in harsh environmental conditions. Thus, the Tees Valley incinerator in Billingham, UK, newly equipped 3 lines with ...


    By Environnement S.A

  • IWC Builds Massive GRP Fan Stacks for Kusile Power Station

    Eskom’s new Kusile Power Station in Witbank, Mpumalanga, is set to benefit from the energy-efficiency of IWC’s patented glass fibre reinforced plastic (GRP) fan stacks, four of which have been manufactured for one of the station’s mechanical induced-draft cooling towers. By incorporating the flared-diffuser design, which has a slightly tapered exit cone and a ...

  • $2 billion/yr market for mercury removal from stack gases

    The market for equipment and consumables to measure and remove mercury from stack gases will average over $2 billion/yr over the next decade. This is the latest forecast in the online McIlvaine "Mercury Air Reduction Markets". There are three immediate markets, all are in the U.S.  They are cement, utility boilers and industrial boilers. Hundreds of millions of dollars has already been spent ...


    By The McIlvaine Company

  • Quantitech instruments measure nothing

    Whilst many of Quantitech’s customers need to measure gas concentrations for reporting or process management purposes, some customers simply have to demonstrate that nothing is there. The Quantitech stand at AQE 2013 (40 & 41) will therefore feature instruments that are able to meet both needs. Reflecting the new theme of AQE 2013, the Quantitech stand will feature the latest ...


    By Quantitech Ltd

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • PCME launches new Flue Gas Measurement System

    PCME Ltd, leading specialist in the development, manufacture and supply of continuous particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor the flow rate of emissions from industrial sources complying with the European Monitoring Standard EN-16911-2.  Suitable for measuring flue gas flow rates after both bag filter and electrostatic ...


    By PCME Ltd

  • A Laser Based Gamechanger: First to Measure Five in One

    A significant breakthrough at NEO Monitors research division, allows global industries to measure four gases and temperature with just one device. This cutting-edge instrument delivers vast benefits and reduced cost for industries requiring the most accurate analysis of processes. NEO Monitors’ LaserGas iQ² product is the first all-in-one tunable diode laser ...


    By NEO Monitors AS

  • A laser based game changer - First to measure five in one

    A significant breakthrough at NEO Monitors research division, allows global industries to measure four gases and temperature with just one device. This cutting-edge instrument delivers vast benefits and reduced cost for industries requiring the most accurate analysis of processes. NEO Monitors’ LaserGasTM iQ² product is the first all-in-one tunable diode laser (TDLS) analyzer for ...


    By NEO Monitors AS

  • ASTM E2029 - 11 standard test method for volumetric and mass flow rate measurement in a duct using tracer gas dilution

    The method presented here is a field method that may be used to determine mass and volume flow rates in ducts where flow conditions may be irregular and nonuniform. The gas flowing in the duct is considered to be an ideal gas. The method may be especially useful in those locations where conventional pitot tube or ...


    By ASTM International

  • ASTM E2102 - 11a standard test method for measurement of mass loss and ignitability for screening purposes using a conical radiant heater

    This test method provides a means for screening materials, products, or assemblies, for the mass loss, and ignitability they exhibit under specified heat flux exposure conditions. As an option, the test method is also suitable for screening for the heat released, by using a thermopile method (See Annex A2). ...


    By ASTM International

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • The Highest Levels Of Performance & Accuracy In Multigas Analysis

    Measure any gas, in any background, with our range of analysers for research, process and emissions. With 20 years’ experience in FTIR gas analyser application and manufacture, Protea can provide the complete gas analysis solution. atmosFIR New Range of high resolution multigas FTIR 19 inch rack or portable versions, for fixed, mobile and integration. PotIR 204M MCERTS approved ...


    By Protea Limited

  • PCME Celebrates 25 Years of Innovation

    PCME Ltd, has been at the forefront of the development, manufacture and supply of continuous particulate emission monitors for industrial processes worldwide for the past 25 years. Reflecting on achievements at recent company celebrations, William Averdieck, Managing Director at PCME Ltd thanked staff, distributors, customers and partners for their invaluable contribution to the ...


    By Environnement S.A

  • CEMS market exceeds US$1 billion - Biggest Single Market Coal-fired Boilers in Asia

    The world market for continuous emissions monitors (CEMS) for ambient as well as stack applications will exceed US$1 billion/yr by 2012. This includes the analyzers, software and accompanying service revenues. An additional US$1 billion/yr will be spent for intermittent stack sampling. An even larger market will be created for optimization systems which integrate the signals of emissions ...


    By The McIlvaine Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you