stack sampling News

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • New portable heated FID for stack testing

    The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...


    By J.U.M. Engineering GmbH

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Energy from waste: new stack emissions monitoring systems

    Incineration plants are subject to the obligation to comply with stringent pollution standards; analysis equipment must operate in continuous in harsh environmental conditions. Thus, the Tees Valley incinerator in Billingham, UK, newly equipped 3 lines with ...


    By Environnement S.A

  • New Rack Mount Heated FID for stack testers and systems integrators

    This new Model 3-500  heated FID hydrocarbon analyzer fully complies  with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with EPA Methods 25A and 305 for the USA. As an attractive low cost alternative to the quite expensive FID analyzers of today's choices for stack emission testing and process  applications, a new, compact heated FID ...


    By J.U.M. Engineering GmbH

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • $3 billion market for air pollution monitoring, sampling and process control

    The world market for stack continuous emissions monitors (CEMs) will be $900 million this year. However, if one takes into account the additional revenues for ambient monitoring systems, intermittent stack sampling and process control using pollutant analyzers, the market is above $3 billion. This is the latest forecast in the McIlvaine Air Pollution Monitoring and Sampling World Markets. Some ...


    By The McIlvaine Company

  • Opsis Fastloop - An alternative sampling system for DOAS cross-duct CEM systems

    Untitled Document Opsis engineers have come up with a novel solution to the problem sometimes encountered when it is difficult to locate cross-duct DOAS analysers close to the stack due to restricted access and ...

  • New Odor Sampling Procedure for high humidity air flow from food or feed dryers/coolers

    Special odour sampling procedure with nitrogen dilution has been developed by Uniqair and Purdue University Odor Lab for odour samples with high humidity from dryers and coolers. The nitrogen will preserve the odor and prevent condensation for more accurate odor concentration test results. Unlike VOC testing, the odour lab is utilizing human noses of screened panel members with odor sensing ...


    By Uniqair Technologies Ltd.

  • New Odor Sampling Procedure for high humidity air flow from food or feed dryers/coolers

    Special odor sampling procedure with nitrogen dilution has been developed by Uniqair and Purdue University Odor Lab for odor samples with high humidity from dryers and coolers. The nitrogen will preserve the odor and prevent condensation for more accurate odor concentration test results. Unlike VOC testing, the odor lab is utilizing human noses of screened panel members with odor sensing ...


    By Uniqair Technologies Ltd.

  • Walter Smith and Associates Workshop

    Walter Smith, PE, BCEE, is an expert in Air Pollution Source Sampling. He is considered the "Grandfather of Stack Sampling". Walter Smith has been conducting stack sampling training courses since 1969. Since leaving EPA in 1972, he has conducted and continues to conduct Source Sampling Workshops every year. Source Sampling & CEMS Workshop Schedule ...


    By Apex Instruments, Inc.

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • Introduction of Genius5 Pmctrace

    2012 the Genius5 pmctrace was introduced at the VDI seminar "Plant related MonitAnlagenbezogenes Monitoring with new concepts“ in Nürtingen. 2 years later the devepped instrument is shown. In 2014 the sampling system was developped to a reliable instrument, which is able to take representative sample from exhaust gas stream over long periode. Target of biogen fraction ...


    By Genius5-Instruments GmbH

  • Condensable particulate matter - exceptions to the rule

    With the recent revisions to Method 202 for condensable particulate matter (CPM), the US EPA included an exception to the requirement to extract the CPM filter (the secondary filter that is located between the “warm” and “cold” sections of the impinger train).  The exception is subject to the following conditions: The source temperature is less than 85°F; ...


    By Golden Specialty, Inc.

  • 4 Continuous Emission Monitoring Systems for Egypt

    The GIZA NORTH Power Plant consists of two modules: each module configured in a 2x2x1 arrangement with two Combustion Turbine Generators (CTGs), two Heat Recovery Steam Generators (HRSGs) and one Steam Turbine Generator (STG). Each module has a rated nominal capacity of 750 MW. Scope of supply: 4 (four) CEMS/Shelters, comprising each a MIR9000 with CLD option, an MVS switching system, 2 SEC ...


    By Environnement S.A

  • Apex Instruments releases the XC-260 Meter Console for mercury emissions

    Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...


    By Apex Instruments, Inc.

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • CEMS market exceeds US$1 billion - Biggest Single Market Coal-fired Boilers in Asia

    The world market for continuous emissions monitors (CEMS) for ambient as well as stack applications will exceed US$1 billion/yr by 2012. This includes the analyzers, software and accompanying service revenues. An additional US$1 billion/yr will be spent for intermittent stack sampling. An even larger market will be created for optimization systems which integrate the signals of emissions ...


    By The McIlvaine Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you