stack sampling equipment News

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter control systems, continuous ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance ...


    By ASTM International

  • ASTM D6831 - 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    The measurement of particulate matter is widely performed to characterize emissions from stationary sources in terms of total emission rates to the atmosphere for regulatory purposes. This test method is particularly well suited for use in performance assessment and optimization of particulate matter ...


    By ASTM International

  • New portable heated FID for stack testing

    The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...


    By J.U.M. Engineering GmbH

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Energy from waste: new stack emissions monitoring systems

    Incineration plants are subject to the obligation to comply with stringent pollution standards; analysis equipment must operate in continuous in harsh environmental conditions. Thus, the Tees Valley incinerator in Billingham, UK, newly equipped 3 lines with ...


    By Environnement S.A

  • $3 billion market for air pollution monitoring, sampling and process control

    The world market for stack continuous emissions monitors (CEMs) will be $900 million this year. However, if one takes into account the additional revenues for ambient monitoring systems, intermittent stack sampling and process control using pollutant analyzers, the market is above $3 billion. This is the latest forecast in the McIlvaine Air Pollution Monitoring and Sampling World Markets. Some ...


    By The McIlvaine Company

  • Walter Smith and Associates Workshop

    Walter Smith, PE, BCEE, is an expert in Air Pollution Source Sampling. He is considered the "Grandfather of Stack Sampling". Walter Smith has been conducting stack sampling training courses since 1969. Since leaving EPA in 1972, he has conducted and continues to conduct Source Sampling Workshops every year. Source Sampling & CEMS Workshop Schedule ...


    By Apex Instruments, Inc.

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • Apex Instruments releases the XC-260 Meter Console for mercury emissions

    Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...


    By Apex Instruments, Inc.

  • CEMS market exceeds US$1 billion - Biggest Single Market Coal-fired Boilers in Asia

    The world market for continuous emissions monitors (CEMS) for ambient as well as stack applications will exceed US$1 billion/yr by 2012. This includes the analyzers, software and accompanying service revenues. An additional US$1 billion/yr will be spent for intermittent stack sampling. An even larger market will be created for optimization systems which integrate the signals of emissions ...


    By The McIlvaine Company

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • New isokinetic sampler is automatic

    Environmental monitoring equipment specialist Quantitech has announced the launch of a new generation of automatic isokinetic samplers that bring new levels of speed, accuracy and reliability to the sampling of particulates and gases from chimneys, stacks and ducts. The new Tecora Isostack G4 (4th Generation) automatically records measurement values in addition to equipment configuration data, ...


    By Quantitech Ltd

  • HI-Q Environmental Products Company, Inc. and VF, a.s. announce the award of radiation monitoring system contract by Energy Northwest

    Energy Northwest selected the team of HI-Q and VF over several other radiation monitoring equipment suppliers for this project. Marc Held, the President of HI-Q stated that "The contract awarded by Energy Northwest to the HI-Q & VF team is yet another significant step toward the successful application of flexible, world-wide solutions in radiation monitoring and protection systems to the ...

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • Continuous Mercury Monitoring with State-of-the-Art Technology = Gasmet CMM

    With the introduction of ever tightening legislation for emissions, new challenges are also facing the equipment that is used for continuous monitoring of trace pollutants. In the United States, the Clean Air Mercury Rule will establish strict limits for Mercury emissions from coal-fired power plants. Gasmet Technologies decided to meet this challenge with a novel approach together with the ...


    By Gasmet Technologies Oy

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • World CEMS Market to Exceed $583 Million in 2009

    The market for continuous emissions monitoring systems (CEMS) to measure pollutants discharged from stacks will rise to $583 million/yr in 2009. The total monitoring market including ambient monitoring and stack testing will reach the $ billion level worldwide in 2009. These are the conclusions provided in “Air Pollution Monitoring and Sampling World Markets” an online continuously updated ...


    By The McIlvaine Company

  • AQE 2015 Conference details announced

    The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive conference programme for the event which will take place in Telford, UK, on 22nd and 23rd April. Organiser Marcus Pattison says: “The event could not have been better timed. Just before Christmas, the UK Government issued a consultation that, if adopted, could result in a dramatic ...

  • Cemtrex Markets Its New Multiplexed Emissions Monitoring System

    Cemtrex, Inc.'s (OTC: CTEI) new Multiplexed Emissions monitoring systems find worldwide acceptance and approvals by multinational engineering companies as well as original equipment manufacturers around the globe. This system termed "IntelliCEM" is designed to sample multiple stacks and provide a very cost-effective solution for process and emissions reporting. Conventional systems require ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you