stack tester News

  • New Rack Mount Heated FID for stack testers and systems integrators

    This new Model 3-500  heated FID hydrocarbon analyzer fully complies  with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with EPA Methods 25A and 305 for the USA. As an attractive low cost alternative to the quite expensive FID analyzers of today's choices for stack emission testing and process  applications, a new, compact heated FID ...


    By J.U.M. Engineering GmbH

  • Due Diligence for Documentation Provided by Stack Testers Relative to 40 CFR, Part 75-Affected Sources

    Most large fossil fuel-fired boilers and combustion turbines used to generate electricity in the United States are required to monitor stack emissions in accordance with 40 CFR, Part 75 (Part 75).1 Stack emissions are commonly monitored directly by continuous emission monitoring systems (CEMS), although certain units qualify for indirect emission monitoring, which employs empirically derived ...


    By Golden Specialty, Inc.

  • New QUV Space Saver Frames from Q-Lab

    Q-Lab Corporation is pleased to announce the launch of the improved space saver frame for QUV and QCT testers.  Save valuable floor space in your weathering test laboratory with these NEW QUV space saver frames from Q-Lab Corporation.  Space saver frames help preserve space in crowded labs with multiple QUV or QCT test chambers.  By allowing testers to be stacked ...


    By Q-Lab Corporation

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • Condensable particulate matter - exceptions to the rule

    With the recent revisions to Method 202 for condensable particulate matter (CPM), the US EPA included an exception to the requirement to extract the CPM filter (the secondary filter that is located between the “warm” and “cold” sections of the impinger train).  The exception is subject to the following conditions: The source temperature is less than 85°F; ...


    By Golden Specialty, Inc.

  • VOC emissions data may be invalid

    Keith Golding, MD of Quantitech Limited, is urging stack testers and the managers of prescribed industrial processes to check the MCERTS certificates of their Flame Ionisation Detectors (FIDs). He says, “The FID fuel gas for which the certificate is valid is now specified so process operators should ensure, for example, that if the certificate specifies a Hydrogen/Helium mix, any compliance ...


    By Quantitech Ltd

  • CEMS market exceeds US$1 billion - Biggest Single Market Coal-fired Boilers in Asia

    The world market for continuous emissions monitors (CEMS) for ambient as well as stack applications will exceed US$1 billion/yr by 2012. This includes the analyzers, software and accompanying service revenues. An additional US$1 billion/yr will be spent for intermittent stack sampling. An even larger market will be created for optimization systems which integrate the signals of emissions ...


    By The McIlvaine Company

  • New isokinetic sampler is automatic

    Environmental monitoring equipment specialist Quantitech has announced the launch of a new generation of automatic isokinetic samplers that bring new levels of speed, accuracy and reliability to the sampling of particulates and gases from chimneys, stacks and ducts. The new Tecora Isostack G4 (4th Generation) automatically records measurement values in addition to equipment configuration data, ...


    By Quantitech Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • Quantitech to launch new Horiba PG250 SRM at MCERTS 2011

    Quantitech, the environmental instrumentation company, will launch the new improved Horiba PG 250 SRM at MCERTS 2011; the specialist air monitoring event being held at the Telford International Centre on 30th and 31st March. Keith Golding, Quantitech Managing Director, says "The Horiba PG 250 SRM will have MCERTS approval by the time of the March event and is TÜV approved for QUAL1." ...


    By Quantitech Ltd

  • New APP for gas monitoring staff

    The Gasmet APP is now available free of charge on both iOS and Android Smartphones, providing anyone with an interest in gas monitoring with quick and easy access to an enormous volume of highly useful information. The APP contains a link to a library of information on 500+ compounds providing IR spectra in addition to chemical formula, molecular weight, boiling point etc. ...


    By Gasmet Technologies Oy

  • Western China International Fair

    October 18th through 22nd 2011 Western China International Fair took place in Chengdu. With many highly interested visitors seeing us in our booth as part of the Bavarian Pavilion, the WCIF was a very successful event for us. We displayed a ...


    By J.U.M. Engineering GmbH

  • Cemtrex Experiencing Increased Inquiry Levels for Its Mercury Monitors

    Cemtrex Inc. (OTC: CTEI) announced today that in light of recent EPA rulings regarding mercury emissions control, Cemtrex is seeing a big surge in the number of business enquiries and opportunities for its mercury monitor across a wide range of industries such as cement plants, utilities and industrial boilers. In the history of the US EPA, 2011 is a landmark year as four major rules for control ...

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • Make sure your products sound right!

    Products that sound wrong can annoy your customers or could indicate a product defect.  Detecting such irregularities before shipping is important, because customers judge the product quality based on these sounds. NTi Audio provides solutions to check the sound quality of your products fast and reliably in an end-of-line test. The best solution uses the FX100 Audio Analyzer ...


    By NTi Audio AG

  • Training Courses Are a ‘Must’ for Those Involved with Continuous Emissions Monitoring

    Untitled Document Following positive feedback from its students Enviro Technology, the UK’s leading exporter of environmental ...

  • Keys to Know about Neodymium Magnets

    A neodymium magnet, or a Neo magnet, is a special magnetic material that can smoothly lift an object heavier than itself. It can obviously attract common ferromagnetic materials like cobalt, iron, steel (an alloy of iron and selected metals) and nickel. When Neo ...


    By Stanford Magnets

  • Datastick Software Upgrades for its Handheld Vibration Analyzers Include New Datastick Review

    Customer input results in new versions of Datastick Spectrum, Datastick Manager and the all-new Datastick Review software for handhelds, as well as Datastick Reporting System(TM) software for PCs CAMPBELL, CA - Datastick Systems, Inc., today announced that new versions 1.7 of the Datastick® Spectrum software suite -- including the ...


    By Datastick Systems, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you