swarf News

  • New aluminium can baler also handles swarf

    JMC has launched a range of balers for handling steel and aluminium drinks cans, aluminium foil, swarf and turnings - materials which are notoriously difficult to process. The new Alpack 5000 RDI is a fully automated system which is able to condense aluminium or steel drinks cans down to 280mm cubes, with no need for strapping or banding. The machine has been enhanced with wear plates to ...


    By JMC Recycling Systems Ltd

  • Swarf shredder reduces storage volume by up to 92 percent

    Shredders remove oil and lubricant residues from swarf, thereby increasing its resale value ...

  • A total of six single-shaft shredders M600-1-400 on their way to Illinois

    These six shredding machines M600 have been packed last week and are now on their way to the USA. They are intended to be used there for shredding steel swarf.   The six machines will be operated for the volume reduction of the steel swarf. In addition, they will contribute to minimizing the risk of accident, because it will remove the need to press the swarf by hand ...

  • Expansion of our distribution

    For expansion of our distribution network we search for international distribution partners for marketing of our machines and plants for general shredding technologies as well as partners for metal swarf processing ...

  • The Masters ‘Sort Out’ BMW

    Master Magnets Ltd custom built and designed a swarf separator for one of the world’s largest car manufacturers. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the Midlands BMW. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the ...


    By Master Magnets Ltd

  • 3rd Briquetting Press HSB 18 has been started up at VTORMET in Moscow

    On the 1st of April 2008 our long established customer, Industrial Company VTORMET, put into operation it’s third briquetting press HSB 18. With this steel swarfs can now be pressed and the briquettes sold to foundries. These can be smelted as secondary raw materials or also used in the foundry. Briquetting produces more additional revenue in comparison to loose swarf. ATM briquetting presses ...


    By ATM Recyclingsystems GmbH

  • One more contribution to resource conservation

    Together with the company TechnoSan, econ industries has customized a process for the treatment of metal grinding swarf. Encouraged by rising resource costs and a high market potential our client chose building the world’s first plant for the production of high quality metal alloys and silicium from waste sludges. Typical input materials for this plant are sludges derived from the ...


    By econ industries GmbH

  • Briquetting press HSB 12 for Schupan & Sons Metal Recycling in Michigan, USA

    The company Schupan & Sons Metal Recycling in Michigan, USA, visited our stand at the ISRI’s  2008 Convention & Exposition in Las Vegas at the beginning of April. After market investigations by Schupan & Sons we started intensive negotiations and were able to successfully secure the order in spite of stiff competition. After our recent successful resumption of marketing activity ...


    By ATM Recyclingsystems GmbH

  • Successful participation at the IMTS show in Chicago

    We presented our single-shaft shredders for processing of all kind of metal swarf together with our sales partner, John Hart USA. The briquetting of our partner John Hart USA is the ideal amendment of our products. Through this there are many new ranges of application. The machine building industry is steadily gaining momentum after the economic crisis in 2009 – the great number of ...

  • Providing waste management solutions to the manufacturing sector

    If you’re a UK manufacturer then GPT Waste has the waste solution for you. Whether your business needs to dispose of hazardous chemicals or industrial coolants, remove metal swarf or recycle waste packaging, GPT Waste offer a nationwide waste management service covering all aspects of manufacturing. GPT’s waste ...


    By GPT Waste Management Ltd

  • Nederman receives order from Sandvik worth over SEK 11 million

    The solution includes two complete vacuum filter systems for cutting fluids used during metal machining. The order also includes oil mist filters and a number of conveyors for swarf. Nederman’s solution enables effective re-use of large amounts of cutting fluids, which provides savings while producing less waste. Installation and start-up will be completed during the second quarter of 2013. ...


    By Nederman

  • Lots of torque at a reasonable price - is what characterises ERDWICH single-shaft shredders!

    The latest addition to our tried-and-trusted M600 model series is the cutting forceoptimised M600/1-600 - High Torque. With this advanced development, ERDWICH is responding to the fact that materials are increasing in quality and becoming more ductile all the time. Accordingly, the chips resulting from machining are also tougher and require a stronger cutting force. Even the toughest chips have ...

  • Small but powerful!

    The shredder M400/1-200 is the smallest machine of ERDWICH’s product range. Despite the comparative small material feeding the shredder convinces via its high power output. The M400/1-200 are ready for transport and wait for their operation. These shredders are set up directly at the machining centre. The funnels are equipped with a maintenance and access door including inspection ...

  • Ilmor Engineering's choice for detail & accuracy

    As one of the world’s top racing engine design and manufacturers, noise levels in the workplace have always been an issue for Ilmor Engineering. But when they won a large contract with the US giant General Motors to design and manufacture a new turbo-charged V6 racing engine for the 2012 IndyCar championship, its managers knew immediately this would result in significantly increased ...


    By Cirrus Research plc

  • 21st century metal sludge recycling

    The ever increasing price for raw materials and our customers’ desire for independence from international resource suppliers was the driver behind our newly developed process to recycle grinding sludges from the metal industry. Until now it has been usual to mechanically separate the oil and press the metal swarf with the remaining oil afterwards. But the emerging low-grade ...


    By econ industries GmbH

  • Until now, bulky steel shavings covered with oil have, in the most part, simply been disposed of, thus wasting valuable resources

    Until now, bulky steel shavings covered with oil have, in the most part, simply been disposed of, thus wasting valuable resources. In order to avoid this, the company GEZE GmbH searched for a method of reducing the volume of the shavings and simultaneously recovering the oil adhering to them for re-use. The company Erdwich Zerkleinerungssysteme GmbH developed a plant for this purpose, which ...

  • Exploit woodchips efficiently

    Ruf presents new briquetting press  Ruf Maschinenbau are bringing two new briquetting systems on to the market with the RUF 300 and the RUF 500, both of which are suited to the processing of diverse wood residuals and further biomass.   The demand for the climate neutral raw material wood as a heating material remains extremely high. As a consequence ...

  • Augmented reality proves RWM hit for UNTHA UK

    RWM stalwart UNTHA UK attracted a lot of attention at this year’s prestigious recycling exhibition. At first glance the team looked like they had left their vast Waste to Energy XR pre-shredder behind at their North Yorkshire headquarters. But as visitors neared the stand they were met with the buzz of dozens of visitors using tablets and smart phones to view the machine using augmented ...


    By UNTHA UK LTD

  • PRAB spotlights system approach to chip processing equipment during IMTS 2012

    PRAB scrap metal and fluid recycling engineers will be on hand at IMTS in Booth E-5664 (held Sept. 10-15 at McCormick Place in Chicago) to meet with attendees to discuss the efficiencies and benefits of scrap metal handling, fluid filtration, and recycling systems. Engineered to address unique manufacturing and industry challenges, PRAB chip handling systems can increase profits by ...


    By PRAB, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you