temperature calibrator News

  • New calibrator for temperature flow & pressure

    Quantitech has launched a new hand-held calibrator; the TCR Tecora Flowcal, which has been developed to enable the fast, accurate calibration of high volume air samplers. Traceable to UKAS standards, the Flowcal provides a convenient and highly accurate method with which to check the performance of air samplers such as the ECHO ambient air particulate sampler. The Flowcal is able to operate ...


    By Quantitech Ltd

  • Now offering in-house temperature calibration service

    CAS DataLoggers is proud to announce it will soon be offering in-house temperature calibration service to customers, utilizing its wealth of electrical engineering knowledge and experience to offer a complete datalogging solution to meet the demands of any temperature monitoring application. CAS has recently acquired temperature calibration equipment and will provide the service for many of its ...


    By CAS DATALOGGERS

  • The new HygroGen calibrator

    The HygroGen is a self-contained transportable humidity and temperature calibrator that enables users and calibration engineers to accurately and rapidly calibrate any type of humidity instrument. The launch of the second generation Airchip3000 based calibrator takes transportable humidity calibration to a new level of performance and ease of use. Rapid and precise Stabilisation of relative ...


    By ROTRONIC AG

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • Portable Ozone Calibrator

    2B Technologies, Inc. has launched its newest innovation, the Model 306 Ozone Calibration Source™ (OCS™). This state-of-the-art instrument is a completely portable (9x21x29 cm) and lightweight (2.6 kg) source of ozone that allows calibration of any ozone monitor regardless of manufacturer. The OCS™ scrubs ozone and water vapor from ambient air and produces any mixing ratio of ozone in the range ...


    By 2B Technologies

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • Need a UKAS calibrated Thermometer?

    UKAS calibration offers an exceptional level of certainty to your measurements, and means you can be sure the equipment you are using is accurate. Hanna Instruments can now offer a handheld digital thermometer which comes complete with UKAS calibration certificate and at a lower price than you might think… The ...


    By Camlab Limited

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • XA1000 in use of Calibration Laboratory in Zagreb

    MTB inzenjering d.o.o. is a trade partner of our industrial measurement instruments in Zagreb, Croatia and our partner for ten years already. They are expanding their own laboratory (BMB laboratory) for calibration of relative humidity devices. For this, they recently needed a new, highly precise hand held device for reference measurements. They decided to rely on the XA1000 hand held device from ...

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Non-Contact Temperature Measurement

    Infrared thermometers allow temperature measurement from a distance without contacting the object to be measured. WIKA offers a full-line of handheld infrared pyrometers to measure hot, hard-to-reach, or moving parts, including an intrinsically safe version that is both CSA and FM approved. Featuring enhanced optics, the comfortable, user-friendly devices provide accurate readings over a ...


  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics

  • New LAND calibration facility opens in India

    The New facility is capable of calibration across a wide temperature range for all its temperature measurement products. The facility issues a Certificate of Calibration from AMETEK LAND with 1 year validity for all its equipment ranging from Cyclops portable thermometers, to System 4 fixed spot pyrometers and Landscan high speed thermal scanners. The facility not only provides a quick turnaround ...


    By AMETEK Land

  • Remote-controlled calibration without liquid standards

    The TOC analyser QuickTOCpharma reliably determines the Total Organic Carbon (TOC) in the lowest measuring range up to 2000ppb. Following the requests, the FDA compliant software (CFR 21 Part 11) among other things facilitates data storage and an electronic signature. The software fully controls the analysis system. Moreover, it combines the high demands of pharmaceutical water measurements, in ...


    By LAR Process Analysers AG

  • Maintain accurate column temperatures for HPLC analysis – even below room temperature

    The Echotherm™ CO50 unit can accurately maintain the temperature of HPLC columns with chilling as well as heating, so it can be used from 4°C up to 100°C to within 0.1°C. The ...


    By Camlab Limited

  • On-Site Calibration with weather sensors from Lufft

    Sometimes it is not possible to renounce for your meteorological stations for several days to ship them for calibration to a calibration laboratory. Nevertheless, the measurement technique should be calibrated at least every two years – The solution is on-site calibration! Two examples of such service I would like to present in more detail in this blog post: Lufft ...

  • AMETEK Land Instruments celebrates 45th anniversary of UKAS calibration laboratory

    AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal measurements and also the first to be accredited for the issue of certificates that met the requirements ...


    By AMETEK Land

  • Underwater vibration measurements even at high temperatures

    Until now, the most appropriate solution for vibration measurements underwater or in situations of temporary submersion, has been to use the DeltaTron® Accelerometer, Type 5958-A. This is an excellent solution for use at temperatures up to 100oC With the introduction of high-temperature DeltaTron® (IEPE) accelerometers and new waterproof cable assemblies however, it is now possible to ...

  • CPC6000 Precision pressure controller - The easy-to-use pressure calibration instrument

    The CPC6000 pneumatic precision pressure controller is impressive, not only for its outstanding technical specification, but also for its excellent price/performance ratio. Due to the modular construction of the pneumatic precision pressure controller, it is possible to operate the instrument with either one or two control channels. Each channel has its own control unit with up to two ...


    By WIKA Instruments Ltd.

  • PerMaSCal – add-on for advanced PTR-TOF mass-scale calibration

    The built-in PerMaSCal unit uses permeation to add a high mass peaks of stable intensity to every spectrum. These signals represent ideal references for accurate, automated TOF mass-scale calibration and other tuning tasks without affecting typical measurement set-ups. ...


    By Ionicon Analytik Ges.m.b.H.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you