IST AG is proud to announce that our company recently obtained ESCC qualification for a thin-film based series of platinum temperature sensors from the European Space Agency (ESA). By qualifying, these sensors of IST AG are now the worldwide standard for use in all missions into space. More information about this you can find at: ...
AKCP Announces NIST Calibrated Temperature Sensors With Accuracy Check and Automatic Failover The world’s oldest and largest supplier of network-enabled sensors releases an updated range of temperature sensors. The NIST2 sensors feature 2x NIST traceable, calibrated temperature sensors and an internal calibration integrity check. NIST4 sensors feature 4x NIST traceable, calibrated sensors ...
WTW adds to its range of IDS pH electrodes four special electrodes for enhanced applications in the Life Science laboratory. Fast response & low maintenance – SenTix® 945 Fast responding, low-maintenance gel electrode with three junctions for pH measurement also in difficult samples. Designed for small samples – SenTix® Micro 900 pH specialist with built-in ...
Automated Control Engineering (ACE) introduce the new Pepperl+Fuchs cables and cordsets for high-temperature environments. With improved resistance to weld slag, the cables can handle temperature ranges of -40 degrees C up to +150 degrees C for extended time periods of up to 3000 hours. The cables and cordsets are constructed of a TPE class jacket material and a temperature resistant conductor ...
Everest Interscience offers a SNOW-THERM™ infrared temperature sensor that is designed solely for the purpose of measuring very low temperatures with extreme accuracy. Measure the surface temperature of snow banks, sometimes continuously, the SNOW-THERM™ is used to predict avalanche activity. The SNOW-THERM™ has a temperature range of minus 40 degrees C to plus 70 degrees C ...
Do you know what Apogee Oxygen Sensor is best for your application? In this how-to-video, we answer the top 7 questions that will help you narrow down our four analog oxygen sensors to the one that will be the best for your use. We cover: What type of oxygen Apogee oxygen sensors measure The difference in sensor model specifications When sensor body temperature should be measured What ...
AKCP Announces NIST Calibrated Temperature Sensors for Wireless Tunnel Platforms With Accuracy Check and Automatic Failover The world’s oldest and largest supplier of network-enabled sensors releases an updated range of temperature sensors. The NIST2 sensors feature 2x NIST traceable, calibrated temperature sensors and an internal calibration integrity check. NIST4 sensors feature 4x NIST ...
Dr. Fiona Turner - Physics Section Manager for AMETEK Land looks at smart aluminium temperature sensors and how to achieve smart control and automatic alignment for autonomous operation and perfect aluminium pressing. A vision of the near future, whereby a smart factory might control itself based on detailed feedback from vast networks of sensors at all stages of a process with intelligent ...
Although the world temperature sensors and transmitters market is considered to be mature, there are many competing temperature sensor technologies that are exhibiting high-growth prospects. Temperature is the most monitored parameter and plays a major role in various end-user applications, especially in critical and hazardous ones. Deployments span medical, heating, ventilation, and air ...
Inverted and bent leads are the optimal solution for applications in tubes where sensors are soldered to the bottom of the tube. They are additionally used in applications with limited space where an optimal thermal contact is required and obtained by soldering sensors to surfaces. That is why the temperature sensors are also offered with a metallized backside to increase thermal coupling and ...
RTD Temperature Sensors can prevent complications that could otherwise lead to bearing failure. Maintaining proper temperatures, along with vibration monitoring and proper greasing, optimizes the longevity of your bearings so they reach their L10 potential. RTDs are made of a fine copper, nickel or platinum wire wrapped around a core that is usually made of glass or ceramic, typically housed in ...
Sensor Specifications We have recently updated our sensor specifications documents to include some new additions to the range. You can view the new documents here: interSeptor and interSeptor Pro Sensor Specifications iMeter and iMeter Lite Sensor Specifications Two recent additions to the range are a brand-new smoke detector and a temperature sensor for use with the iMeter hardware that ...
FTS has launched a new digital submersible temperature sensor. DigiTemp is a simple but effective digital temperature sensor for use in water or soil, and its use of SDI-12 interface makes it unique in the marketplace. The sensor has been tested and approved by the USGS Hydrological Instrumentation Facility (HIF). “The release of ‘FTS DigiTemp’ is significant in that it marks ...
CUSTOMER REPORTED THE FOLLOWING RESULTS FROM THE INSPECTION: The Challenger helical MeteoShield protected the sensor from the dirt contamination better compared to the Reference. MeteoTemp temperature and humidity sensor shows minimal signs of dirt buildup. Most notable is the lack of dirt buildup on MeteoTemp inside the helical MeteoShield from the direction of the roadway which is the ...
Endress+Hauser launches a complete and innovative temperature instruments portfolio for hygienic and aseptic applications. The offering is aimed at the food & beverage and life sciences industries where stringent quality and safety regulations must be met. Instruments for hygienic applications The complete offering includes innovative temperature instruments, system products, software ...
With the iTHERM TrustSens TM371, Endress+Hauser is presenting truly unique sensor technology with a fully automated inline self-calibration function The new iTHERM TrustSens enables seamless inline monitoring, resulting in high product reliability and increased plant capacity utilization. The hygienic thermometer is designed primarily for users in the pharmaceutical and food and beverage ...
This month we are pleased to introduce our latest product the WaterTechw² TMP Sensor. The WaterTechw² TMP Temperature Sensor is a precision device which offers breakthrough performance over a wide industrial temperature range and is compatible with the 7300w² Monitor. Designed for use between -10 °C and +80°C with a measurement accuracy of +/-0.3 °C. The clever ...
The LCF-2330 inclinometer series now includes a 4-20mA output signal option for applications that require long cable runs. This dual axis tilt sensor is fluid damped to minimize noise and vibration interference while also offering a sharp 1 µradian resolution. An internal temperature sensor is available and dual supply, ±5 Vdc output is an option. The LCF-2330 is an excellent ...
Not only got the Lufft Blog a new design, but also the mobile road weather sensor has been upgraded. What’s the difference between the first and the new MARWIS version? How does the MARWIS friction measurement differ from grip testers? And how do customers mount MARWIS on small transporters? From the Lufft Development: MARWIS 2.0 Since Intertraffic 2016 the new MARWIS (2.0) is available. ...
The risk of exposure to legionella must regularly be controlled by measures that do not permit the development of legionella bacteria in water supplies which include the avoidance of water temperatures among 20 C and 45 C, which leads to the development of legionella bacteria and other organisms. Here are the standards for hot & cold water temperature: Cold Water After running the cold ...