titration requires News

  • New application on thermometric titration

    Thermometric titration is fast (usually less than 3 minutes), no special sensor maintenance is required, and less solvent is needed than for potentiometric titrations. Moreover, it can be fully automated. Metrohm presents 4 new applications using thermometric ...


    By Metrohm AG

  • PC-BOD/Titrate Duo™ BOD by day, titrate by night

    Man-Tech Associates Inc. is pleased to announce the release of the PC-BOD/Titrate Duo™. The PC-BOD/Titrate Duo enables laboratories to prepare and analyze samples for BOD5 then, with a simple change of a rack and probe holder, analyze different samples for pH, conductivity, alkalinity, turbidity and more! BOD by Day, Titrate by Night. With the PC-BOD/Titrate Duo, Man-Tech delivers BOD and ...


    By MANTECH Inc.

  • 900 Touch Control – Titration was Never Easier

    Powerful as a PC, smaller than a Netbook and as easy to use as an iPhone – these are the main features of the 900 Touch Control. Users of Metrohm’s new benchtop control device start their ...


    By Metrohm AG

  • Faster Acid Number Determination with New Thermometric Titration

    The new METTLER TOLEDO Thermotrode sensor and ASTM D8045 thermometric acid number standard helps users analyze crude oil and petroleum products faster and easier than ever. Thermotrode adds a new dimension to the modular Titration Excellence line platform. Is low in ...


    By Metrohm AG

  • Safer and easier – Karl Fischer titration with OMNIS

    Metrohm expands the OMNIS Titration Platform enabling users to perform volumetric Karl Fischer titrations. The OMNIS Karl Fischer Titrator addresses the needs of users for ease of use and protection from solvents and reagents with a whole range of innovative features. Safer – no risk of physical contact with solvents and ...


    By Metrohm AG

  • Finally: Reliable walk-away automation for serial volumetric Karl Fischer titration

    Automating volumetric titration in whole series of samples used to be a challenge: Firstly, there is the risk of ambient moisture compromising sample integrity, and secondly, there is the necessity to start the titration in due time for each sample. Both challenges required the attention and constant presence of the lab technician during the analysis. Not any longer, as with the OMNIS ...


    By Metrohm AG

  • Titration: tiamo™ 2.2 software available in 12 different languages!

    Metrohm speaks your language: So far, tiamo™ 2.2, the latest version of the world’s leading software for titration, has been available in German and English. Now, updates for another 10 languages are available. The new language updates are available from the software center on www.metrohm.com. Installation of tiamo™ 2.2 is required before the language updates can be downloaded ...


    By Metrohm AG

  • Higher product yields, less waste: Determination of metal-organic compounds by thermometric titration

    Metrohm is pleased to present a fast and highly accurate method for the determination of metal-organic compounds by thermometric titration. The main advantage of this method is its versatile use for different metal-organic compounds. Metal-organic compounds are commonly used in organic chemistry, for example as Grignard reagents or as strong bases (e.g., butyl lithium ...


    By Metrohm AG

  • Stop guessing shades of red, orange, purple, … new optical sensor for automated photometric titrations

    Many titrations are still often performed manually because regulations require a titration to continue until the color changes; in other words, the endpoint must not be indicated by a pH electrode or a metal electrode. Guessing shades of red, orange, purple, etc., however has an end, as such titrations can now be automated with a new optical sensor, the Metrohm  ...


    By Metrohm AG

  • TitrIC pro – multi-ion analysis by automated titration, direct measurement, and ion chromatography

    Metrohm presents TitrIC pro, the latest version of the company’s all-in-one system for efficient monitoring of standard parameters and contaminants in drinking water and other matrices. TitrIC pro combines titration, ion chromatography and direct measurement in a single analytical system. ...


    By Metrohm USA Inc.

  • 916 Ti-Touch – compact, stand-alone titrator more powerful than ever

    Metrohm is pleased to announce the release of a new version of the 916 Ti-Touch Titrator for potentiometric titration. New convenience features and additional capabilities make the 916 Ti-Touch more powerful than ever. Users may now connect a second titration stand, do pH-STAT titrations, benefit from dedicated ...


    By Metrohm AG

  • Automated thermometric titrimetry – straightforward quality control of fats and oils

    Minimum operator involvement and high analytical productivity – these are key benefits of automated thermometric titration. The method is ideal for monitoring the quality of fats and oils, namely to determine crucial parameters such as free fatty acid content and iodine value. Benefits of thermometric titrimetry Thermometric titration means that there is no electrical contact with titrating ...


    By Metrohm AG

  • OMNIS – consolidate your wet chemical analysis on a single system!

    What if you were able to determine all your titration parameters on a single system? Simply integrate new methods when you need to? Automate your analyses when higher throughput is required – on the same platform? With OMNIS you can just do this: Start out with a simple stand-alone titrator, scale it up step by step, and ultimately benefit from a custom solution performing 4 titrations ...


    By Metrohm AG

  • ASTM D8045 – New method for acid number determination in crude oil

    Metrohm is pleased to announce that the ASTM has published method D8045 for the determination of Acid Number (AN) in crude oil and petroleum products. The new method describes thermometric titration and was developed by Metrohm together with industry leaders using the ...


    By Metrohm AG

  • Acid Number testing – Save thousands of dollars with ASTM D8045

    Recently the ASTM published method D8045 for Acid Number determination in crude oil and petroleum products. Now there is an online calculator available to help users determine how much their laboratory will save, if they switch from method D664 to the new method D8045. ...


    By Metrohm AG

  • Acid Number testing – Save thousands of dollars with ASTM D8045

    Recently the ASTM published method D8045 for Acid Number determination in crude oil and petroleum products. Now there is an online calculator available to help users determine how much their laboratory will save, if they switch from method D664 to the new method D8045. ...


    By Metrohm AG

  • 898 XYZ Sample Changer – get accurate results faster for large sample series

    Metrohm presents the 898 XYZ Sample changer, an XYZ automate for the fast and reliable analysis of large sample series. Measurements and titrations are carried out directly in the sample vessels. High throughput, plenty of space for 82 samples, the possibility to change racks during operation plus the system being controled by the tiamo™ software make the 898 XYZ Sample Change the ideal ...


    By Metrohm AG

  • RapidDuo enables high speed multi-parameter analysis from a single sample

    Man-Tech is pleased to announce the release of the RapidDuo™. The RapidDuo enables rapid, multi-parameter analysis, from a single sample. The RapidDuo is the HIGH SPEED version of Man-Tech’s PC-Titrate TitraSip System. The RapidDuo makes it possible to analyze pH, conductivity, alkalinity and fluoride, in 3 minutes or less!Man-Tech delivered Multi-Parameter Solutions to the Environmental Industry ...


    By MANTECH Inc.

  • Automated Conductivity, pH & Alkalinity

    Conductivity, pH and alkalinity are important water tests common to all commercial and government environmental testing laboratories. Conductivity (SM 2510 B) is an excellent indicator of water purity, and can be used to estimate Total Dissolved Solids (TDS) and Salinity of a sample, or to monitor a natural water source for contamination and pollution. pH (SM 4500-H+ B) is an essential parameter ...


    By MANTECH Inc.

  • For a greener chemistry: New version of ASTM D664 cuts solvent use by 50%

    Metrohm is pleased to announce that the ASTM released a new version of ASTM D664 for the potentiometric determination of acid number. The new version offers the possibility to reduce the required amount of solvent from 125 mL to 60 mL. Metrohm together with industry leaders investigated and proposed this possibility in a contribution towards green chemistry. The acid ...


    By Metrohm AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you