titration system News

  • New application on thermometric titration

    Thermometric titration is fast (usually less than 3 minutes), no special sensor maintenance is required, and less solvent is needed than for potentiometric titrations. Moreover, it can be fully automated. Metrohm presents 4 new applications using thermometric ...


    By Metrohm AG

  • PC-BOD/Titrate Duo™ BOD by day, titrate by night

    Man-Tech Associates Inc. is pleased to announce the release of the PC-BOD/Titrate Duo™. The PC-BOD/Titrate Duo enables laboratories to prepare and analyze samples for BOD5 then, with a simple change of a rack and probe holder, analyze different samples for pH, conductivity, alkalinity, turbidity and more! BOD by Day, Titrate by Night. With the PC-BOD/Titrate Duo, Man-Tech delivers BOD and ...


    By MANTECH INC.

  • OMNIS – Metrohm makes titration faster, safer, and easier

    «A whole new level of performance» – that is the promise of OMNIS, the new platform for wet chemical analysis by Metrohm. With OMNIS, the market leader in titration addresses the needs of small and large laboratories alike: The new titration platform is modular and can be expanded from a simple stand-alone titrator to a powerful robotic system performing 4 analyses ...


    By Metrohm AG

  • 900 Touch Control – Titration was Never Easier

    Powerful as a PC, smaller than a Netbook and as easy to use as an iPhone – these are the main features of the 900 Touch Control. Users of Metrohm’s new benchtop control device start their ...


    By Metrohm AG

  • Ti-Touch – finally, titration reduced to the max!

    Metrohm is pleased to introduce the Ti-Touch, the new compact titrator for routine analysis. The Ti-Touch, which is available for Karl Fischer titration (915 KF Ti-Touch) and potentiometric titration (916 Ti-Touch), sets the new standard for stand-alone titrators. The key-features and user benefits speak for themselves: Maximum system integration Buret, stirrer, dosing system and ...


    By Metrohm AG

  • Ti-Touch – finally, titration reduced to the max!

    Metrohm is pleased to introduce the Ti-Touch, the new compact titrator for routine analysis. The Ti-Touch, which is available for Karl Fischer titration (915 KF Ti-Touch) and potentiometric titration (916 Ti-Touch), sets the new standard for stand-alone titrators. The key-features and user benefits speak for themselves: Maximum system integration Buret, stirrer, dosing system and ...


    By Metrohm AG

  • Webinars on titration and ion chromatography available on demand

    Almost 1000 participants and dozens of questions asked and answered – that’s the result of our latest educational webinars on titration and ion chromatography. Anybody who did not have a chance to tune in live can now watch those webinars on demand! Here are the titles of the webinars and the links to register: ...


    By Metrohm AG

  • TitrIC – comprehensive water analysis with hyphenated IC and titration system

    Metrohm presents TitrIC, an all-in-one system for efficient monitoring of standard parameters and contaminants in drinking water. TitrIC combines titration, ion chromatography and direct measurement in a single analytical unit. TitrIC has been developed with a focus on water analysis but can likewise be adapted to suit the needs in food, pharmaceutical and plating analysis. More details and ...


    By Metrohm AG

  • tiamo™ – the No 1 titration software even more powerful now

    Metrohm presents tiamo™ 2.2, the latest version of the leading software for titration and more. As a new feature, tiamo™ 2.2 now enables control of thermometric titrations. Moreover, new commands have been implemented to increase efficiency of your Metrohm instruments in the lab. The new graphical editor allows users to get more out of their titration system. New methods can be drawn ...


    By Metrohm AG

  • Titration: tiamo™ 2.2 software available in 12 different languages!

    Metrohm speaks your language: So far, tiamo™ 2.2, the latest version of the world’s leading software for titration, has been available in German and English. Now, updates for another 10 languages are available. The new language updates are available from the software center on www.metrohm.com. Installation of tiamo™ 2.2 is required before the language updates can be downloaded ...


    By Metrohm AG

  • Potentiometric titration of surfactants and pharmaceuticals – more than 170 proven applications

    Metrohm is pleased to present an Application Bulletin (AB 268) that gives an overview of the multitude of surfactants and pharmaceuticals that can be determined by potentiometric titration. Moreover, this AB comes with a tabular overview of more than 170 proven applications for surfactant and pharmaceutical analysis. ...


    By Metrohm AG

  • Smaller footprint, higher throughput – automated, parallel titrations with OMNIS

    Performing 4 different titrations simultaneously on a single, fully automated system is the new state of the art in titration. The new OMNIS platform by Metrohm includes an of x-y-z sample robot, taking the efficiency of wet chemical analysis to new levels. Higher sample throughput …Besides a titrator,  ...


    By Metrohm AG

  • Metrohm publishes new Application Notes (ANs) about photometric titration

    Accompanying the introduction of the new Optrode photometric sensor, Metrohm presents a range of titrimetric applications using the advantages of photometric detection of the equivalence point. The new applications cover a number of industries including the pharmaceutical industry, the petrochemical industry, and water analysis. The ...


    By Metrohm AG

  • TitrIC pro – multi-ion analysis by automated titration, direct measurement, and ion chromatography

    Metrohm presents TitrIC pro, the latest version of the company’s all-in-one system for efficient monitoring of standard parameters and contaminants in drinking water and other matrices. TitrIC pro combines titration, ion chromatography and direct measurement in a single analytical system. ...


    By Metrohm USA Inc.

  • Stop guessing shades of red, orange, purple, … new optical sensor for automated photometric titrations

    Many titrations are still often performed manually because regulations require a titration to continue until the color changes; in other words, the endpoint must not be indicated by a pH electrode or a metal electrode. Guessing shades of red, orange, purple, etc., however has an end, as such titrations can now be automated with a new optical sensor, the Metrohm  ...


    By Metrohm AG

  • Optrode – new sensor from Metrohm for photometric titrations according to US and Ph. Eur.

    Eight wavelengths for a wide measuring range (470, 502, 520, 574, 590, 610, 640 and 660 nm), 100% solvent resistance due to a glass shaft, and easy handling – these are the key-benefits of the Optrode, the new photometric sensor from Metrohm. Whenever a potentiometric determination of the equivalence point is impossible, but a simple and fast ...


    By Metrohm AG

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • New, modular system for multi-method analysis on a single platform

    Quality control in many industries depends on the routine analysis of a handful of key parameters. Often, determination of these parameters is distributed across several technologies and methods. This goes along with cumbersome aggregation of results and management of data from different sources. With the launch of the new, modular OMNIS platform for comprehensive wet chemical ...


    By Metrohm AG

  • Thermo Fisher Scientific Offers Simpler Solution to System Integrity Testing for Mercury Emissions Monitoring

    FRANKLIN, Mass. (May 9, 2007) – Thermo Fisher Scientific Inc., the world leader in serving science, announces the Model 81i MCG mercuric chloride generator, a simpler solution to the demand for weekly system integrity testing for mercury emissions monitoring at coal-fired power plants. An optional feature for new systems and a simple retrofit for installed units, the Model 81i MCG is a fully ...

  • Annacis Research Center, Vancouver, praises the speed, safety and accuracy of the PeCOD COD testing system

    The Annacis Wastewater Centre Sustainability Academy has recognized MANTECH for its donation of water analysis and testing equipment, which is being used by the faculty and students of the University of British Columbia (UBC) to conduct wastewater research. Their director, Jeff Carmichael, has praised the speed, safety and accuracy that the ...


    By Camlab Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you