Showing results for: TPH analyzer News
-
Measuring fats, oils and greases in wastewater
Portable mid-IR Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to assist regulators, as well as industry, to reduce the build up of fats, oils, and greases (FOG) in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is important to locate and monitor sites that are suspected of dumping high levels of FOG in the sewer line. In addition, ...
-
New video on the InfraCal TOG/TPH Analyzers for measuring fats, oil and grease in wastewater
We have just completed a new video on our InfraCal TOG/TPH Analyzers for measuring fats, oil and grease levels in water and wastewater, as well as TPH in soil. We hope you will take a few minutes to view this video and share it with others in your organization who may have a need for easy, on-site measurements of this type. The following are links to access the video: On our website On ...
-
Factory Calibrated Infrared Analyzers Provide On-Site Oil in Water or Soil Measurements in 10-15 Minutes
Wilks Enterprise is pleased to announce the availability of factory-calibrated portable infrared analyzers for determining the concentration level of oil in water or soil. The InfraCal TOG/TPH Analyzers provide easy, on-site measurements in 10-15 minutes and eliminate the need to wait for off-site results. The InfraCal Analyzers are ideal for use by non-technical personnel on oil drilling ...
-
White Paper covering Emulsion-Breaking Techniques for Accurate Oil in Water Measurements published by Wilks Enterprise
East Norwalk, CT – A White Paper entitled, “Emulsion-Breaking Techniques to Ensure Accurate Oil in Water Measurements,” was recently published by Wilks Enterprise, Inc. Certain water samples, such as those containing detergent, may form an emulsion when oil in water extraction into a solvent is done. In order to ensure an accurate measurement, the emulsion must be broken. The ...
-
Measuring hydrocarbon levels in wastewater in under 15 minutes
Determining total hydrocarbon or oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem facing numerous industries. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total hydrocarbon concentration. Wilks ...
-
On-site measurement of fats, oils and greases in wastewater in under 10 minutes using portable IR analyzers
InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to assist regulators, as well as industry, to reduce the build up of fats, oils, and greases (FOG) in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is important to locate and monitor sites that are suspected of dumping high levels of FOG into the sewer line. In ...
-
Is your hydrocarbon analysis as reliable as you think it is? And if not, who`s liable?
A major multinational organisation recently undertook an evaluation of MCERTS laboratory performance for petroleum hydrocarbons. Ten duplicate sets of samples containing sand and gravel were prepared. Five of the sets also had 10% by weight of peat added. (Peat in common with other organic material is known to interfere with the lab TPH analysis.) A 5000ppm concentration of diesel was spiked into ...
By QROS Ltd
-
On-Site Wastewater Analysis
The US EPA, as well as other governmental regulatory agencies, have instituted stricter regulations covering discharges of “oily wastes” from facilities into publicity owed treatment plants (POTWs) facilities, forcing numerous industries to monitor their effluent more closely prior to discharge. This regulations affect such industries as food – both processors and restaurants, metal fabrication, ...
-
Portable IR Analyzers Measure Fats, Oil and Grease Levels in Wastewater
With stricter wastewater regulations facing all industries, it is important to ensure excessive levels of fats, oil, and grease (FOG) are not being discharged. The InfraCal TOG/TPH Analyzers provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers as it is ...
-
Portable Oil/Grease Analyzers Provide Field-Proven Methodology to Assist with Gulf of Mexico Oil Spill
East Norwalk, CT, June 7, 2010 -- InfraCal TOG/TPH Analyzers, manufactured by Wilks Enterprise, Inc., provides field-proven methodology to assist with the clean-up of the oil spill in the Gulf of Mexico. The InfraCal Analyzers are currently used by numerous oil companies worldwide on offshore oil platforms and in refineries for easy, on-site infrared measurement of total oil and grease (TOG) and ...
-
On-Site TPH-in-Soil Measurements in less than 10-15 Minutes
On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil, using S-316 instead of Freon for the extraction process as recently approved by the ASTM, is easily handled using the Infracal TOG/TPH Analyzer, Model CVH, manufactured by Wilks Enterprise, Inc. The Infracal TOG/TPH Analyzer is a portable infrared (IR) analyzer that quickly determines TPH levels in less than ...
-
Oil-in-water measurements on off-shore platforms, in refineries or wastewater treatment facilities
The InfraCal TOG/TPH Analyzers, manufactured by Wilks Enterprise, Inc. are specifically designed for easy, on-site measurement of total oil and grease (TOG), total petroleum hydrocarbon (TPH), and fats, oil and grease (FOG) concentration levels in produced water on off-shore platforms or wastewater in refineries or treatment facilities. Typical analysis time is under 15 minutes, including ...
-
New Video features Portable Infrared Analyzers for On-Site Measurement of Oil in Water/Soil
Wilks Enterprise is pleased to announce a new video featuring the measurement of oil and grease in water/soil with easy-to-use portable infrared analyzers. This 3-minute video demonstrates how on-site measurements with the InfraCal TOG/TPH Analyzers can save time and money, as they allow oil and grease levels in wastewater to be determined in under 15 minutes. These measurements help ensure ...
-
Wilks expanding Video FAQs for InfraCal Analyzers
While a picture may be worth a thousand words, a video can be invaluable for helping customers out with frequently asked questions. Wilks is expanding a series of 2-3 minute “how to” videos. Below is a sampling of some that have been completed. Did you know Wilks now has an ASTM compliant instrument for measuring percent biodiesel blend in diesel fuel? ...
-
Increased oil In water measurement capability with new InfraCal 2 Analyzer
The new InfraCal 2 Analyzer, recently introduced by Wilks, for oil in water measurements offers additional features to the already established and widely-used line of InfraCal TOG/TPH Analyzers. These features include increased sensitivity for sub-ppm measurements, multiple calibrations, unlimited data storage, optional internal battery pack, and password protected instrument settings, as well ...
-
Extended Measurement Ranges for Testing Oil Content in Water and/or Soil with the InfraCal 2 Analyzers
There are several options for InfraCal users who would like to measure from sub-ppm to percent levels of fats, oil and grease (FOG) or total petroleum hydrocarbons in water, drill cuttings or soil. The new InfraCal 2 has the capability of multiple calibrations for different concentration ranges while the standard InfraCal TOG/TPH Analyzers only hold one calibration. Listed below are the typical ...
-
Testing Drinking Water From Jet Fuel Spill, Pearl Harbor, Hawaii
Winter 2022: The U.S. military and their contractors are using Sitelab UVF-TRILOGY analyzers, model 7200-004-FNGP, to monitor hydrocarbons in drinking water samples. In late November 2021, a large fuel leak occured at the Red Hill tank farm and contaminated the water supply serving the base. Thousands of homes were effected. The U.S. Navy is working closely with the Hawaii Department of ...
-
Fats, Oil and Grease Levels in Wastewater Measured On-Site in Under 10 Minutes
Stricter wastewater regulations worldwide are aimed at ensuring excessive levels of fats, oil, and grease (FOG) in wastewater are not being discharged. The InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers ...
-
Portable IR analyzer used by Water Environment Research Foundation in wastewater study
The Water Environment Research Foundation (WERF) recently sponsored an extensive study to evaluate the performance of different grease interceptor designs. The InfraCal TOG/TPH Analyzer, Model HATR-T2, from Wilks Enterprise, was used to measure the concentration levels of fats, oil and grease (FOG) in the wastewater leaving the interceptors. The complete study has just been released by WERF ...
-
Fast, easy on-site measurement of hydrocarbons in drilling mud and oil in water
Portable infrared analyzers, such as the InfraCal Analyzers from Wilks, have been used worldwide for measuring off-shore oil in produced water for over 30 years. They have the advantage over other analytical instruments in that the measurement can be performed by non-technical users and it is relatively unaffected by composition changes in the effluent. They also provide off-shore users with the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you