traceable calibration News

  • Traceable test weights for secure weighing results

    Balances used in regulated environments must be tested on a regular basis with calibrated test weights. To calibrate these weights, the XP Mass Comparators, in combination with MCLink software, offers an ideal solution. The software automatically generates all data, calculations and reports and stores it in full compliance to regulations. Normally, all equipment, especially those in ...


    By Mettler - Toledo Int. Inc

  • SI traceability for mercury vapour measurement in air

    A new experiment, designed by NPL and the Joint Research Centre - Institute for Research Materials and Measurements (JRC-IRMM), has recently been completed and published in Analytical Chemistry. The collaborative experiment, performed as part of the European Metrology Research Programme ...

  • New Method provides Direct SI Traceability for Sound Pressure

    Accurate measurements of airborne sound are needed for a range of regulatory, health and safety, and commercial applications, from monitoring environmental noise to testing the performance of acoustic devices. To ensure reliable measurements of sound pressure, microphones must be regularly calibrated by measuring their sensitivity over a certain frequency range. Currently, the most accurate ...

  • Portable Ozone Calibrator

    2B Technologies, Inc. has launched its newest innovation, the Model 306 Ozone Calibration Source™ (OCS™). This state-of-the-art instrument is a completely portable (9x21x29 cm) and lightweight (2.6 kg) source of ozone that allows calibration of any ozone monitor regardless of manufacturer. The OCS™ scrubs ozone and water vapor from ambient air and produces any mixing ratio of ozone in the range ...


    By 2B Technologies

  • New calibrator for temperature flow & pressure

    Quantitech has launched a new hand-held calibrator; the TCR Tecora Flowcal, which has been developed to enable the fast, accurate calibration of high volume air samplers. Traceable to UKAS standards, the Flowcal provides a convenient and highly accurate method with which to check the performance of air samplers such as the ECHO ambient air particulate sampler. The Flowcal is able to operate ...


    By Quantitech Ltd

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Colorimeter chlorine analyser calibration instrumen

    The new P334 Colorimeter instrument provides a simple, reliable solution for calibrating on-line chlorine analysers in compliance with US EPA Method 334.0, published in November 2009. The hand-held Colorimeter includes an easy to follow step-by-step procedure guide; the easiest to use National Institute of Standards and Technology (NIST) traceable standards; and a certificate of calibration from ...


  • New LAND calibration facility opens in India

    The New facility is capable of calibration across a wide temperature range for all its temperature measurement products. The facility issues a Certificate of Calibration from AMETEK LAND with 1 year validity for all its equipment ranging from Cyclops portable thermometers, to System 4 fixed spot pyrometers and Landscan high speed thermal scanners. The facility not only provides a quick turnaround ...


    By AMETEK Land

  • On-Site Calibration with weather sensors from Lufft

    Sometimes it is not possible to renounce for your meteorological stations for several days to ship them for calibration to a calibration laboratory. Nevertheless, the measurement technique should be calibrated at least every two years – The solution is on-site calibration! Two examples of such service I would like to present in more detail in this blog post: Lufft ...

  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics

  • Calibrating and servicing noise measurement instruments is not a luxury

    Why have your noise measurement calibrated and serviced? Pulsar Instruments plc, the fastest growing manufacturer of noise measurement products in the world, is highlighting the importance of returning any precision instruments bought from them for regular calibration and servicing. Buying a new noise measurement instrument is an investment.  As such, it is ...


    By Pulsar Instruments plc

  • AMETEK Land Instruments celebrates 45th anniversary of UKAS calibration laboratory

    AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal measurements and also the first to be accredited for the issue of certificates that met the requirements ...


    By AMETEK Land

  • Renishaw unveils the new XM-60 multi-axis calibrator

    Renishaw, the world-leading metrology specialist, will exhibit its new XM-60 multi-axis calibrator at IMTS 2016, Chicago, USA and AMB 2016, Stuttgart, Germany. The XM-60 is capable of measuring all six degrees of freedom from a single set-up, in any orientation for linear axes. It offers significant improvement in simplicity and time ...


    By Renishaw plc

  • The new FlowExplorer DPSS: compact, powerful and calibrated LDA optics

    Our FlowExplorer product range is now extended with new products employing high power Diode Pumped Solid State (DPSS) lasers. The move from diode lasers to DPSS lasers allows us to increase the laser power while retaining a compact optical head. The new FlowExplorer DPSS is available with laser powers 100, 150 and 300 mW per wavelength in configurations for one, two or three velocity ...


    By Dantec Dynamics

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • XL2 Sound Level Meter Calibration according to IEC standard

    In addition to developing and manufacturing audio, acoustic and vibration measurement systems, NTi Audio also offers a range of calibration and maintenance services for its devices. Besides the calibration of individual system components, a complete Sound Level Meter calibration according to IEC61672-3: 2013 is now available. The XL2 Analyzer and microphone are subjected to a series of acoustic ...


    By NTi Audio AG

  • AMETEK Land Standardises Certificates of Conformity and Adds Calibration Data as Standard

    AMETEK Land has standardised all its Certificates of Conformity for its fixed spot and portable infrared thermometers. ...


    By AMETEK Land

  • AMETEK Land Standardises Certificates of Conformity and adds calibration data as standard

    AMETEK Land has standardised all its Certificates of Conformity for its fixed spot and portable infrared thermometers. ...


    By AMETEK Land

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • New calibry 5.0 pipette calibration software from Mettler-Toledo enhances accuracy

    METTLER TOLEDO’s latest user-friendly pipette calibration software helps generate accurate results for less rework and reduced operating costs METTLER TOLEDO’s new Calibry 5.0 pipette calibration software offers the usability of previous versions with an important difference. Identifiers can now be written directly to RFID-enabled RAININ pipettes. Quick tagging offers enterprise-wide ...


    By Mettler - Toledo Int. Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you