turbine exhaust News

  • Turbine Truck Engines Announces Return to OTCBB

    Turbine Truck Engines, Inc. ("TTE") (OTCBB: TTEG), announced the Company's stock quotation coverage has moved from the OTC Markets Group, Inc.'s OTCQB to the Financial Industry Regulatory Authority (FINRA) operated OTC Bulletin Board (OTCBB) under the same symbol "TTEG." The OTCBB is a regulated quotation service that displays real-time quotes, last-sale prices, and volume information in ...


    By Marketwire

  • MHI to build gas turbine combustor manufacturing plant in US

    Mitsubishi Heavy Industries, Ltd. (MHI) has formulated a plan to build a gas turbine manufacturing plant in the U.S., and as the plan's initial phase the company will construct a plant near Savannah, Georgia, to produce combustors, a key component of gas turbines, targeting production launch by the end of 2010. The plan also calls for MHI to develop this initiative further, taking ...


    By Japan Corporate News - JCN

  • Improve Gas Turbine Engine Reliability with Cool Valves and Piping

    Presentations and discussion at meetings of the gas-turbine users groups, such as the 7F, often call into view problems owner/operators are having with the liquid-fuel systems on their dual-fuel engines—in particular, unreliable starts and unreliable fuel transfers from gas to oil. A couple of years ago, the sure solution for some users rarely called to operate on oil was to disable or ...

  • GE Wins Largest Gas Turbine Combined-Cycle Order in India

    Contracts over $750 Million for 2,400-Megawatt Samalkot Power Plant Expansion. Reliance Power Ltd. of India has selected GE’s (NYSE: GE) flexible, efficient power generation technology for a 2,400-megawatt expansion of the Samalkot power plant in the state of Andhra Pradesh, India. This will represent the largest gas turbine combined-cycle project in India’s history and ...


    By General Electric

  • ASTM D7422 - 11 standard test method for evaluation of diesel engine oils in T-12 exhaust gas recirculation diesel engine

    This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR and running on ultra-low sulfur diesel fuel. Obtain results from used oil analysis and component measurements before and after test. The test method may be used for engine oil specification acceptance when all details of ...


    By ASTM International

  • ASTM D6987 / D6987M - 11 standard test method for evaluation of diesel engine oils in t-10 exhaust gas recirculation diesel engine

    This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR. Obtain results from used oil analysis and component measurements before and after the test. The test method may be used for engine oil specification acceptance when all details of the procedure are followed. ...


    By ASTM International

  • DOE Selects Ten Projects to Conduct Advanced Turbine Technology Research

    Ten university projects to conduct advanced turbine technology research under the Office of Fossil Energy’s University Turbine Systems Research (UTSR) Program have been selected by the U.S. Department of Energy (DOE) for additional development. Developing gas turbines that run with greater cleanness and efficiency than current models is of great benefit both to the environment and the power ...


    By US Department of Energy

  • Gamesa launches its latest turbine: the G126-2.5 MW, maximum output for less windy regions

    The new G126-2.5 MW turbine allows users to maximise efficiency and profitability at low wind speed sites. The G126-2.5 MW turbine boosts energy production by up to 25% relative to the G114-2.0 MW. Today, Gamesa, a global technology leader in wind energy, unveiled its new 2.5-MW turbine, specially designed for less windy ...


    By Gamesa

  • GE’s Frame 6FA gas turbines to help meet growing power needs of Sabah, Malaysia

    GE (NYSE: GE) will supply three Frame 6FA gas turbines, associated generators and services for the 300-megawatt combined cycle gas-fired power plant project in Sabah, Malaysia. Using natural gas as its primary fuel, the new plant will reinforce Sabah’s energy infrastructure and help the state meet its growing electricity demand, which is increasing by more than 7 percent annually. The ...

  • Gamesa travels to the WindEnergy Hamburg trade fair with its most innovative turbines and services

    The company is participating in various expert conferences and talks that will tackle the looming challenges facing the wind power industry Gamesa, a global technology leader in wind energy, is attending Europe's largest wind event, the WindEnergy Hamburg trade fair, with its newest turbine models, the G132-3.3 MW and the G126-2.5 MW, and its innovative services solutions for the European ...


    By Gamesa

  • GE Partners with Nanjing Turbine Company to supply technology for new industrial cogeneration plant in China

    GE (NYSE: GE) and its technology partner, Nanjing Turbine & Electric Machinery Company, Ltd., (NTC), will supply two 6F 3-series gas turbines to Chinese power company Guodian Dianli for the Nanxun power plant near Huzhu city in Zhejiang province, China. The new cogeneration plant will provide electricity ...


    By General Electric

  • Wind Energy Update: Electrical systems faults No.1 cause of offshore turbine downtime

    Scott reports failures of electrical and controls systems are the root cause of wind turbine repairs in 50% of cases, and operators should expect an electronic or electrical subassembly failure every 2 to 2.5 years, according to Wind Energy Update’s Offshore operations and Maintenance report 2011, released today. According to the report’s authors, while the failure rate event of electrical ...


    By PRWeb

  • 4 Continuous Emission Monitoring Systems for Egypt

    The GIZA NORTH Power Plant consists of two modules: each module configured in a 2x2x1 arrangement with two Combustion Turbine Generators (CTGs), two Heat Recovery Steam Generators (HRSGs) and one Steam Turbine Generator (STG). Each module has a rated nominal capacity of 750 MW. Scope of supply: 4 (four) CEMS/Shelters, comprising each a MIR9000 with CLD option, an MVS switching system, 2 SEC ...


    By Environnement S.A

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • contec was successfully presented the new COMS at the TPS 2016

    contec Oil Mist Separators (COMS)/Oil Mist Eliminators for the extraction and filtration of oil mist are used for large-scale compressors, gas and steam turbines, generators and other equipment with oil systems to ensure clean, oil-free exhaust air. 99.98 % of solid and liquid particles and aerosols down to 0.1 micron are removed and high-quality oil can be regained. This prevents the leakage of ...

  • Capstone CNG microturbine certified to CARB 2010 for HDDE Urban Bus

    Capstone Turbine Corporation, a clean technology manufacturer of microturbine energy systems, has released configurations of the C30 compressed natural gas (CNG) microturbine that meet or exceed emissions standards, including the U.S. Environmental Protection Agency and California Air Resources Board (CARB) 2010 requirements for On-Road Heavy Duty Diesel Engines (HDDE) for Urban Bus. Test ...


  • contec Oil Mist Separator (COMS) type 8.000/762-G08 is installed at Noor III project

    The 150 MW Noor III CSP project is a greenfield IPP to be developed as the third project for the Moroccan Agency for Solar Energy (MASEN) in a series of several planned developments at the Ouarzazate Solar Complex. NOOR 3 is a CSP tower, with a capacity of 150 MW and 7 hours of storage. contec Oil Mist Separators (COMS)/Oil Mist Eliminators for the extraction and ...

  • contec was successfully presented the new COMS at the TPS 2016

    contec Oil Mist Separator (COMS) type 8.000/762-G08 was successfully presented the new COMS at the TPS 2016 in Houston/USA. contec Oil Mist Separators (COMS)/Oil Mist Eliminators for the extraction and filtration of oil mist are used for large-scale compressors, gas and steam turbines, generators and other equipment with oil systems to ensure clean, oil-free exhaust air. 99.98 % of solid and ...

  • Increase reliability and performance with New JASC products

    It’s So Cool All New Water-Cooled 3-Way Purge Valve The JASC Water-Cooled Three-Way Purge Valve was engineered to prevent liquid fuel coking that typically occurs when valves are exposed to heat for extended periods of time while the turbine is operating on gas fuel. JASC’s new and improved Water-Cooled Three-Way Purge Valve features extensive internal cooling ...

  • Wind Energy Update: Wind Farm O&M: Best Practice on Cost Containment

    O&M costs under-estimated On the basis of an exhaustive industry survey, Wind Energy Update finds that wind farm return on investment is around -21 percent. This underperformance is attributable to over-estimation of power production and underestimation of O&M costs. In the early days, the industry had costed out O&M at roughly 0.5c/kw over a turbine’s 20-year life. But as newer ...


    By PRWeb

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you