valve locator News

  • DN600 WaStop Protects from flooding in Depew NY

    Flooding occurred regularly at the pubic works (water and sewer) yard where offices, public works trucks and snow plows are located. An old underground valve vault in the compound flooded every year in the spring snow melt. The vault drained into the creek and was protected with an Iron flap valve. The flap valve always seized partly open rendering if useless for flood protection. The operators ...


    By Wapro AB

  • A helping hand for local monitoring and control of actuators in inaccessible locations

    Rotork’s superior solution provides the user with an exact duplicate of the actuator’s own monitoring and control interface, at a distance of up to 100 metres from the valve. Power for the Remote Hand Station is supplied by the actuator, with which the unit shares all the benefits of the same IP68 double O-ring sealed environmental enclosure. There is no need for expensive cabling; ...


    By Rotork

  • VALVE WORLD 2016 — Germany International Valve Exhibition

    Name: VALVE WORLD2016 — Germany International Valve Exhibition. Date: Nov. 28th to Dec. 1st, 2016. Address: Dusseldorf, Germany. Venue: Dusseldorf International Exhibition Center. Introduction of Exhibition: VALVE WORLD is the only worldwide professional valve exhibition held by Dutch ...


    By Derbo Steel Pipe Co., Ltd.

  • Baltimore region embraces program to locate, map, assess and repair water distribution assets

    Over the past decade, the City of Baltimore has seen vast improvements in control point operability and system sustainability of its water distribution assets. The report card is looking better each year. The Baltimore City Department of Public Works shoulders a big responsibility.  The Department provides 265 million gallons of water daily to 1.8 million ...


    By Pure Technologies

  • Hydra-Stop Introduces Insta-Valve Plus for Valve Insertion

    Huntsville, AL. ADS® LLC and Hydra-Stop®, a division of ADS LLC today announces the introduction of Insta-Valve® Plus, a resilient seat wedge valve that provides years of trouble-free operation, easy insertion, and high reliability. Through the use of advanced materials and new technologies this valve replacement system is more durable and highly resistant to breakage and leakage. Insta-Valve ...

  • Rotork opens Valve Automation Centre in Mexico

    Rotork is proud to announce the opening of its new Valve Automation Centre in Mexico. Strategically located in Mexico City, it is the first full shop facility for Rotork in the country. The 1360m² building houses the new headquarters for Rotork’s Mexican subsidiary company, incorporating inside sales, contracts, after sales and service departments as well as a training centre for ...


    By Rotork

  • CNPC Valve Authorized Centralized Purchasing in 2014

    In the bidding process CNPC Valve Authorized Centralized Purchasing in 2014 organized by China Petroleum Materials Corporation for entrusting of CNPC, more than 30 China Valves manufacturers have won the qualification of CNPC Valve Authorized Centralized Purchasing to provide high pressure valve to CNPC, ...

  • Divers install eccentric plug valve in reservoir tunnel

    A team of specialist divers – working in a cramped, water-filled tunnel 20 metres beneath the surface of a reservoir – has just completed installation of an eccentric plug valve to control water flow.The valve and associated equipment has been supplied to United Utilities by Viking Johnson (www.vikingjohnson.com), a world leader in the supply of pipe joints and ...


    By Viking Johnson

  • Manually energised solution for failsafe valve actuators

    Rotork has introduced an innovative range of manually energised spring-return actuators to provide an economical solution for failsafe valves that are infrequently operated. The Rotork ManPower range greatly reduces installation time and expense since no external electrical, hydraulic or pneumatic power supply is required. Suitable for a wide range of ball, butterfly and plug valves, the ...


    By Rotork

  • Compact low power electric actuator for choke valves

    In the latest development of its successful range of CMA electric control valve actuators, Rotork has introduced a new version specifically designed for the demands of choke valve operation. Built with extensive industry experience, the CMR-250/GB3 actuator meets exacting requirements for low power, high torque modulating control in a compact package for applications including severe service ...


    By Rotork

  • AWWA announces new edition of air valves manual

    The American Water Works Association has released the second edition of M51 Air Valves: Air-Release, Air/Vacuum & Combination. Choosing and installing the correct air valve is critical to all liquid piping systems. The effects of air and vacuum pockets present in a system can have an undesirable impact on a pump, meter and control valve operation and can create pipeline breaks and collapses. ...

  • Customized ZS Strainer Protects Valves & Pipelines from Foreign Matter

    Singer Valve's ZS Strainer protects control valves and pipelines from foreign matter like twigs, leaves or rocks that get caught in the flow causing blocks or equipment failure.  The Z plate design gives a smooth laminar flow that reduces downstream disturbance making it ideal for locations ahead of automatic control valves.   The 316 stainless steel screen gives a large flow area and ...


    By Singer Valve Inc.

  • Safe operation of the Wupper Dam thanks to the VAG RIKO® Plunger Valve

    In the overall dam system of the River Wupper Water Association, the Wupper Dam is the last large dam located upstream of the city of Wuppertal. Since March 2009, a VAG RIKO® Plunger valve DN 900 has ensured the safe operation of the barrage and has thus put an end to many years of problems in the control of the water volumes.With a damming height of 30 metres and a retaining capacity of about ...

  • Singer Valve Inc. Appointments Ryan Spooner as Head of Instrumentation & Automation

    Singer Valve, is pleased to announce the appointment of Ryan Spooner as Manger of Instrumentation & Automation. Andrew Taylor, President for Singer Valve said, “Ryan’s expertise in mechatronics coupled with his proven record at Singer Valve to solve and create complex automation solutions for our customers, makes him a natural fit to head up our Instrumentation & Automation ...


    By Singer Valve Inc.

  • Rotork delivers all-electric isolating and control valve actuation for gas plants

    Rotork actuators are fulfilling the all-electric specification for valve control on new gas dehydration units constructed at seven sites in the Transylvanian region of Romania. The new plants have been built for Romgaz, the largest natural gas producer in Romania, responsible for the production of around 40% of the country’s consumption. Dehydration plants use triethylene glycol to remove ...


    By Rotork

  • Flowserve Announces $9 Million Valve Order from Nickel Processing Plant

    Flowserve to provide comprehensive plug-and-ball valve offerings to meet customer needs for wide variety of mining applications. DALLAS, March 19, 2013 - Flowserve Corporation (NYSE:FLS), a leading provider of flow control products and services for the global infrastructure markets, today announced that it has received orders totaling more than $9 million for a range of valves serving a new ...


    By Flowserve Corporation

  • Valve automation delivers centralised monitoring and control to pipeline network

    A programme of valve motorisation is a central feature of an extensive automation project that will obtain, store and process data in real time from a network of liquid hydrocarbon product pipelines in Latin America. The project is installing a SCADA control system for the integration, monitoring and control of valves at more than 100 refining product, storage and injection sites on over 2500 ...


    By Rotork

  • Metso receives a large service contract for valves from Arcelor Mittal in Brazil

    Metso and Arcelor Mittal Tubarão, located in Espirito Santo State, Brazil, have signed a service contract covering approximately 2,000 automatic and safety valves. The contract also includes intelligent tools for preventive and predictive maintenance and maintenance planning activities. It expands the existing contract and is one of the largest for Metso’s valve operations in South ...


    By Metso Recycling Equipment

  • Metso continues investing in valve production and services now in the US

    Metso Corporation's press release on May 17, 2011 at 09:00 a.m. local time   ...


    By Metso Corporation

  • New Rotating multi-port valve enhances countercurrent ion exchange

    14 June 2006: DESSEL, BELGIUM: Belgian separations technology company PuriTech has developed IONEX, an ion exchange system that is targeted at a broad range of industries. Based on an innovative valve design, this liquid adsorption separation technology improves liquid–resin contact efficiency while reducing plant operating costs and capital expenditure. IONEX uses a single, multi-port ...


    By Clarity Authoring

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you