volatile organic compounds monitoring News

  • NEW PHOCHECK TIGER- VOLATILE ORGANIC COMPOUND MONITOR

    Tough, reliability and accuracy make the new PhoCheck Tiger an easy choice for VOC (volatile organic compound measurement).  Incorporating patented technology to ensure successful operation the PhoCheck Tiger gives you reliability previously unavailable.  This rugged instrument is further protected by the removable rubber boot.  Contamination has routinely been a problem for PID ...


    By Shawcity Limited

  • VOC72M: the most compact and robust analyzer of volatile organic compounds on the market

    With more than 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of VOC’s by gas chromatography with photo ionization detector (PID). The VOC can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range ...


    By Environnement S.A

  • Land Surveying for Volatile Organics Detection with PID

    Environmental Consultants and contractors have the responsibility of monitoring the remediation of industrial waste sites and closed military bases. With Government pressure to develop brownfield sites, the environmental consultant must identify contamination and ensure clean-up is effective. A simple method is to use PIDs to rule out the presence of Volatile Organic Compounds (VOCs) in ...


    By Shawcity Limited

  • EPA adds areas of long island to the superfund list; volatile organic compounds found in 11 major drinking water wells

    The U.S. Environmental Protection Agency today announced its decision to add areas of Hicksville, New Cassel, Westbury, Hempstead and Salisbury in Nassau County, New York to the Superfund National Priorities List of the country’s most hazardous waste sites. Ground water throughout these areas is contaminated with harmful volatile organic compounds (VOCs). The Magothy aquifer, Nassau ...

  • FTIR for CEM’s and VOC’s monitoring

    As major contributors to environmental emissions, the waste incineration and power generation industries require both continuous and periodic emissions monitoring to ensure each plant is within Emission Limit Values (ELVs). FTIR provide to perform emissions monitoring solutions for the range of standard incineration or “combustion” gases, both inorganic species such as CO, NOx, SO2, ...


    By ETG Risorse e Tecnologia

  • Sky high – Fast detection of total organic carbon peak loads

    Normally, production facilities have low waste water discharge levels, mostly within the range of 1,000 ppm TOC (total organic carbon). However, occasionally the installation can suffer failures or process disturbances take place. In this case, the range could very well reach a level of up to 50,000 ppm. If these go ...


    By LAR Process Analysers AG

  • CMT simplifies Vapor intrusion monitoring

    Vapor intrusion refers to the movement of volatile chemicals from the subsurface into the indoor air of overlying buildings. The most common source is groundwater or soil contaminated with volatile organic compounds (VOCs). VOCs emit vapors that migrate into pore spaces of the soil and upward into the overlying environment. Generally, vapors enter buildings through cracks and openings in the ...


    By Solinst Canada Ltd.

  • DirectSense® ultra-m environmental monitors

    GrayWolf Sensing Solutions of Trumbull, Connecticut introduces a new range of DirectSense Ultra-Mini PC based advanced environmental monitors. These measurement kits include USB enabled multi-sensor probes and a new Mobile PC platform.The new Fujitsu Ultra-Mini Vista OS mobile PC sports a swiveling, touch screen and easy-to-use keyboard. A built-in camera is great for photographs (or even ...


    By GrayWolf Sensing Solutions

  • Monitor and control Indoor Air Quality with the ‘Touch Screen’ IAQ Monitor

    PPM Technology is pleased to announce their latest IAQ monitoring instrument - the Touch Screen IAQ Profile Monitor is built with an integrated 3.5” touch screen panel. Each unit can monitor up to 7 customer specified IAQ parameters. The user is able to navigate through the software and various sensor options simply by touching the panel.  Readings are displayed continuously and ...


    By PPM Technology

  • Swedish gas monitoring – the state of play

    Although Analox Sensor Technology sell a wide range of products to many international distributors, there are some countries that we would like to focus on. One of these countries is Sweden. We have spent some time looking at Sweden to see what industries require gas monitoring, how we can help with our unique gas monitoring solutions, and how you can become a distributor of our products. ...


    By Analox Sensor Technology

  • CMT for high resolution vapor intrusion monitoring

    Background Vapor intrusion refers to the movement of volatile chemicals from the subsurface into the indoor air of overlying buildings. The most common source is groundwater or soil contaminated with volatile organic compounds (VOCs). VOCs emit vapors that migrate into pore spaces of the soil and upward into the overlying environment. Generally, vapors enter buildings through cracks and ...


    By Solinst Canada Ltd.

  • PTR-MS for indoor air quality monitoring

    A new review article discussed some most important applications of IONICON PTR-MS systems in indoor air quality monitoring Air quality indoors is influenced by many sources of airborne contamination e.g. VOCs (volatile organic compounds). These substances are emitted by household products, electronics such ...


    By Ionicon Analytik Ges.m.b.H.

  • Ambient Pollution Monitoring Stations For Smelter Plants

    Environnement S.A is pleased to announce a new order from NALCO India (National Aluminium Company Ltd) for the supply of 3 complete AQMS stations including analyzers such as AF22M (for SO2 monitoring) / AC32M (for NO, NO2, NOx) / CO12M (for CO and CO2 monitoring)  / MP101M particulate monitors (for PM10 / PM2.5)  for air pollution monitoring of a Smelter Plant located in Angul ...


    By Environnement S.A

  • Gas detection solutions for monitoring compressed breathing air

    At first glance the physiological demands of the firefighter, the scuba diver and the hospital patient have little in common. One is trained to deal with fire and rescue, one swims underwater and one is concerned with either regaining or improving their health. Yet all three depend to some extent on a safe source of compressed breathing air. In the case of the firefighter, portable breathing sets ...


    By Analox Sensor Technology

  • Next-generation ambient air quality monitoring technology

    The European company recordum has developed world’s first out-of-the-box plug-and-play solution for air quality monitoring. The airpointer® is a compact multi-gas monitoring solution for people who want results. Typically less than two hours after delivery on‐site the customers see the first measurement data – on the Internet without any specific software, just their browser. At the same ...


  • Particles Plus unveils Air Quality Monitors

    Particles Plus unveiled its new Air Quality Monitors at the 2015 Indoor Environment & Energy Exposition. This line of innovative particle counters measures particle mass concentrations and total particle mass while monitoring and recording essential environmental conditions such as temperature, relative humidity, and Carbon Dioxide (CO2) or Total Volatile Organic Compounds (TVOC). What makes ...


    By Particles Plus, Inc.

  • CASELLA LAUNCHES NEW INTRINSICALLY SAFE MONITOR for VOC’s

    CASELLA LAUNCHES NEW INTRINSICALLY SAFE MONITOR for VOC's Casella CEL, the specialist provider of workplace monitoring technologies, launches 'VOC Pro', a new , ATEX & UL certified, hand held, photoionisation air monitor ...


    By Casella

  • ASTM D4129 - 05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection

    This test method is necessary because of the need for rapid reliable tests for carbonaceous material in waters and sediments. It is used for determining the concentration of organic carbon in water that comes from a variety of natural, domestic, and industrial sources. Typically, these measurements are used to monitor organic pollutants in domestic and industrial waste water. When a ...


    By ASTM International

  • Acid Rain Emissions Are Down, Monitoring Still Needed

    For the first time, emissions of a key component of acid rain and smog from power plants fell below 10 million tons in a year, the U.S. Environmental Protection Agency reports. In 2006, annual sulfur dioxide, SO2, emissions from acid rain program electric power generation sources fell sharply. Sources emitted 9.4 million tons of SO2 last year, below the emission cap of 9.5 million tons. ...

  • Environmental Sensing and Monitoring Technologies: Global Markets

    INTRODUCTION PRINCIPAL TRENDS There are two principal trends of note in the environmental sensing and monitoring business. The first is the technological revolution in the design and engineering of individual sensors and sensor components. The trend in terms of individual sensors is toward miniaturization. Making sensors smaller lowers material costs and energy requirements and makes large ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you