waste combustion technology News

  • UNTHA shredding technology – Ecologically sound preparation of hazardous waste for combustion

    Paint cans, metal buckets, plastic jerry cans, 200 l metal barrels, grid containers made from metal, 1000 l IBC containers, etc. – all these things together result in a mix of paint, acids, lye, solvents, and similar substances. Ekol, d.o.o. a company from Kranj/Slovenia was looking for a shredder to prepare such materials for further treatment in an incinerator.  They found the right ...


    By UNTHA Shredding Technology

  • Combustion analyzer for rough environments

    Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is based on the proven LaserGas™ III platform, and is for those that need CO-monitoring in combustion processes. In combination with LaserGas™ III SP O2, the analyzer is the answer to any combustion process where ...


    By NEO Monitors AS

  • Cyclone Power Technologies Performs Combustion Tests of Gulf Crude Oil

    POMPANO BEACH, Fla - Cyclone Power Technologies, Inc. (Pink Sheets: CYPW) has successfully performed combustion acceptability tests of crude oil recovered from the Gulf of Mexico with its award-winning, heat-regenerative external combustion engine. During the tests, Cyclone ignited a small amount of crude oil spilled from the Deepwater Horizon accident through its combustion chamber fuel ...

  • Global Fuel Efficient Internal Combustion Engine (ICE) Technologies

    Fuel Efficient Internal Combustion Engine market report contains comprehensive data on the worldwide market for efficient ICE technologies (engine deactivation, cylinder deactivation, variable valve timing and lift, turbochargers and superchargers, direct fuel injection, homogeneous charge compression ignition, reduced displacement engines, hybrids and partial hybrids, split cycle engines, and ...

  • MagneGas moves to Advanced Testing of Co-Combustion Technology for Coal emission reductions

    MagneGas Corporation ("MagneGas" or the "Company") (NASDAQ: MNGA), a leading technology company that counts among its inventions a patented process that converts liquid waste into MagneGas® fuel, this week announced that it continues the testing of its advanced co-combustion technology to reduce coal emissions. One week after President Obama again proclaimed greenhouse gas emissions to be, ...


    By MagneGas Corporation

  • Fuel Efficient Internal Combustion Engine (ICE) Technologies Worldwide

    Fuel Efficient Internal Combustion Engine market report contains comprehensive data on the worldwide market for efficient ICE technologies (engine deactivation, cylinder deactivation, variable valve timing and lift, turbochargers and superchargers, direct fuel injection, homogeneous charge compression ignition, reduced displacement engines, hybrids and partial hybrids, split cycle engines, and ...


  • Chinese waste treated with European technology

    Another pre-treatment plant for household waste was ordered for the south-east of China from the Austrian-German technology firm REDWAVE. By using mechanical biological treatment (MBT) it will dry and sort the waste for a local waste-to-energy (WTE) plant. The capacity of the facility will amount to 650,000 tons annualy respectively 1,800 tons per day. The purchaser of the plant is a private ...

  • Global Waste to Energy Technologies Market

    ResearchMoz.us include new market research report" Global Waste to Energy Technologies Market 2012-2016" to its huge collection of research reports. Global Waste to Energy Technologies Market All Points are covered in table of Content of this Report some of them listed ...


  • ABUTEC 200: A State-of-the-Art Combustion Solution

    The ABUTEC 200 is the most versatile unit of the three standard-sized unit offerings from ABUTEC. These units are sized for the flow and British Thermal Unit (BTU) value of the gas the unit will be handling. The ABUTEC 200, developed, with the largest exploration and production facilities in mind, is a reliable unit for combusting even the largest amounts of vapors. Many features come standard on ...


    By ABUTEC LLC

  • Advanced Combustion Systems Projects Selected for Funding

    The Department of Energy’s National Energy Technology Laboratory (NETL) has selected ten projects to receive funding through NETL’s Advanced Combustion Systems Program. The program focuses on lowering costs and improving performance of combustion systems that generate electricity with near-zero emissions, including ...


    By US Department of Energy

  • Eco Waste Solutions has acquired the Enercon Waste to Energy Technology

    Eco Waste Solutions (EWS) is pleased to announce the 4th generation Enercon waste-to-energy (WTE) technology with new innovations for improved efficiency and operational reliability. Enercon Systems’ time-tested WTE technology has proven to be practical, reliable, and cost-effective for more than 30 years. This technology is the ideal choice for small- to medium-sized communities as it can ...


    By Eco Waste Solutions

  • Technology for TASi: High-tech equipment for waste treatment

    It wasn't a law but a simple administrative regulation in the form of a technical guideline that provided the key impulse for the diversion of waste flows in Germany away from landfill sites. In the course of the implementation of this Technical Directive on Residential Waste (TASi), the technology for treating waste underwent an extraordinary development. This is especially true of thermal ...


    By Koelnmesse GmbH

  • U.S. EPA ICRs require HAP and other emissions tests on combustion units

    In early June 2009, U.S. EPA issued Information Collection Request (ICR) letters to facilities requiring hazardous air pollutant (HAP) and other emission tests on more than 300 industrial, commercial and institutional boilers and process heaters and on commercial/industrial solid waste incinerators (CISWI). The request is enforceable under Section 114 of the federal Clean Air Act. Facilities have ...


    By Custom Stack Analysis, LLC.

  • ElectraTherm’s Waste Heat to Power Technology Reduces Flaring at Oil Well

    ElectraTherm, a leader in distributed waste heat to power generation, partnered with a major oil and gas company to commission a Power+ Generator™ at a North Dakota oil well. The Power+ captures the natural gas that would otherwise be flared to generate electricity and reduce or eliminate onsite flaring. In collaboration with distributor Gulf Coast Green Energy, the project successfully ...


    By ElectraTherm

  • New Study On Global Waste to Energy Technologies Market 2012-2016

    TechNavio's analysts forecast the Global Waste to Energy Technologies market to grow at a CAGR of 5.35 percent over the period 2012-2016. One of the key factors contributing to this market growth is the increasing environmental concerns. The Global Waste to Energy Technologies market has also been witnessing the increased interdependence of WTE plants and hydrogen plants. However, the ...


  • New Market Overview: Global Waste to Energy Technologies Market, 2012-2016

    ResearchMoz.us include new market research report" Global Waste to Energy Technologies Market 2012-2016" to its huge collection of research reports. TechNavio's analysts forecast the Global Waste to Energy Technologies market to grow at a CAGR of 5.35 percent over the period 2012-2016. One of the key factors contributing to this market growth is the increasing environmental concerns. ...


  • Latest Overview: Global Waste to Energy Technologies Market, 2012-2016

    ResearchMoz.us include new market research report" Global Waste to Energy Technologies Market 2012-2016" to its huge collection of research reports. Global Waste to Energy Technologies Market All Points are covered in table of Content of this Report some of them listed ...


  • PyroGenesis waste-to-energy technology passes another crucial milestone

    PyroGenesis Canada Inc.'s plasma waste-to-energy system technology has passed a major test and may soon be going to sea. The Montreal-based environmental solutions company that designs, develops and manufactures plasma waste-to-energy systems and plasma torch products has announced the successful design, construction and testing of one of its Plasma Arc Waste Destruction Systems (PAWDS) for use ...


    By GLOBE Foundation

  • Waste to Energy Technologies Market to Grow at a CAGR of 5.35% to 2016

    One of the key factors contributing to this market growth is the increasing environmental concerns. The Global Waste to Energy Technologies market has also been witnessing the increased interdependence of WTE plants and hydrogen plants. However, the availability of substitute methods could pose a challenge to the growth of this market. The report, ...

  • EnviroSolutions Exploring Anaerobic Digestion Technologies to Recycle Mixed Solid Waste

    When people think about landfills, the mind doesn’t paint an appealing picture. However, while landfills aren’t aesthetically pleasing, there are numerous benefits to landfills, many of them environmental. Municipal solid waste (or MSW) landfills have been converting waste to energy since the 1890’s. However, until recently, this was done through the process of combustion in ...


    By EnviroSolutions, Inc. (ESI)

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you