waste sampler News

  • Personal Biological Air Sampler

    ARELCO ARC announces the availability of a new biological air sampler CIP10 M for individual or dedicated sampling. The micro organisms are collected on a liquid which is maintained in a rotating cup which generates a helicoidal air flowrate. The lab analysis (enumeration or identification technique) of the liquid determines micro biological air quality (bacteria, fungi, mould or endotoxin...) ...

  • CIP10 M Biological Air Sampler

    A new biological air sampler CIP10 M for individual or dedicated sampling. The micro organisms are collected on a liquid which is maintained in a rotating cup which generates a helicoidal air flowrate. The lab analysis (enumeration or identification technique) of the liquid determines micro biological air quality (bacteria, fungi, mould or endotoxin...). The small, compact light and low noise ...

  • ARELCO announces Personal Bio Sampler

    ARELCO ARC announces the availability of a new biological air sampler CIP10 M for individual or dedicated sampling. The micro organisms are collected on a liquid which is maintained in a rotating cup which generates a helicoidal air flowrate. The lab analysis (enumeration or identification technique) of the liquid determines micro biological air quality (bacteria like legionela and listeria, ...

  • New sewage sampler enables real-time control

    HACH LANGE has launched an innovative new wastewater sampling system, which will open up a new world of opportunity by enabling water companies to continuously monitor sewage at the plant inlet. In the past, it has been almost impossible to monitor influent because of the physical and biological challenges that sewage presents – ragging, biofouling etc. However, following trials at a ...


  • ASTM D5495 - 03(2011) standard practice for sampling with a composite Liquid Waste Sampler (COLIWASA)

    This practice is applicable to sampling liquid wastes and other stratified liquids. The COLIWASA is used to obtain a vertical column of liquid representing an accurate cross-section of the sampled material. To obtain a representative sample of stratified liquids, the COLIWASA should be open at both ends so that material flows through it as it is slowly lowered to the desired sampling depth. The ...


    By ASTM International

  • Concurrent waste management challenges in Middle East

    Waste Management Middle East Forum to be held on 11-12 November in Dubai - UAE will gather waste management professionals to discuss practices to effectively manage waste. Middle East is witnessing huge developments in the waste management sector. Bee’ah, one of the leading companies in waste management will be expanding its operations and reach in the Kingdom of Saudi Arabia in ...


    By Fleming Gulf FZE

  • ASTM D6009 - 12 Standard Guide for Sampling Waste Piles

    This guide is intended to provide guidance for sampling waste piles. It can be used to obtain samples for waste characterization related to use, treatment, or disposal; to monitor an active pile; to prepare for closure of the waste pile; or to investigate the contents of an abandoned pile. Techniques used to sample include both in-place evaluations of the ...


    By ASTM International

  • Verderflex Peristaltic Pumps For Reliable Wastewater Performance

    A leading international wastewater instrumentation manufacturer is now using peristaltic pumps from Verderflex as part of the wastewater sampler systems it manufactures. The pumps provide reliable and accurate performance which helps the Hydrocell sampler systems produced by Halifax-based Smart Storm to measure the volume and toxicity of wastewater effluent. As a leading provider of water and ...

  • ASTM D6063 - 11 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel

    1. Scope 1.1 This guide covers information, including flow charts, for field personnel to follow in order to collect samples from drums and similar containers. 1.2 The purpose of this guide is to help field personnel in planning and obtaining samples from drums and similar containers, using equipment and techniques that will ensure that the ...


    By ASTM International

  • Aquamatic expands

    On the year of its 20th Anniversary, Aquamatic Limited, the manufacturer of MCERTS compliant Wastewater Sampling Equipment, has just completed construction of its brand new manufacturing facility in the North West of England. More than doubling the size of the previous building this move is a welcome success story in these challenging economic times. Jeremy Smith, Aquamatic Managing Director, ...


    By Aquamatic Ltd

  • Teledyne Isco Announces the Merger of Teledyne MGD

    Isco builds further on philosophy to obtain environmental data of the highest possible quality for every application and budget Lincoln, NE – May 11 2006. Teledyne Isco, Inc., a developer and manufacturer of environmental monitoring equipment and laboratory products, announced that its subsidiary, Teledyne MGD, Inc., has been merged into Teledyne Isco, Inc. The merger was effective May 5, ...


    By Teledyne Isco

  • Analytical Services Successfully Complete UKAS audit for Operator Self Monitoring Sampling Regime

    Following a recent audit conducted for the Operator Self Monitoring (OSM) procedures by the accreditation body United Kingdom Accreditation Service (UKAS), Severn Trent Services are pleased to announce that we have retained our UKAS 17025:2005 and MCERTS accreditation for our sampling team. The UKAS audit was the third phase of a four-year rolling cycle and continues to demonstrate the ...


  • EPA outlines next steps at the capital city plume site in Montgomery, AL

    EPA will communicate to building owners and the general public the results of indoor air quality and outside soil vapor sampling that took place in mid-August 2011 as soon as those results are available. If warranted by the results of the sampling data, EPA may undertake additional sampling and/or mitigate exposure to contaminants through indoor air utilizing its emergency response ...

  • Hach Lange celebrates 75th anniversary

    HACH LANGE has been a leader in the development of analytical instrumentation and reagents for testing, monitoring and sampling water for three quarters of a century. To celebrate this achievement UK Marketing Manager Sarah Blayds is running a competition with a trip for two to Berlin as first prize. Sarah says 'It is quick and easy to compete; just send me an email and I will send you a ...


  • Infratech: World class in every way

    Infratech, a customer-focused Whitecourt, Alberta, company founded in 1987, provides world-class combustion process and incineration-related products and specialized technical services to a global client base. Infratech manufactures its products to exacting specifications, creating application-specifc incinerator designs and cost-efficient, environmentally sensitive combustion solutions for ...


    By Infratech Corporation

  • Agilent Technologies Enhances Sample-Prep Workbench for Consistent Precision and Safety

    Agilent Technologies Inc. (NYSE: A) today introduced a collection of new features to the 7696A Sample Prep Workbench chromatography sample-preparation system. These enhancements will enable laboratories to further minimize bottlenecks associated with sample ...


    By Agilent Technologies, Inc.

  • FCI Environmental is pleased to announce the introduction of PetroSentry

    FCI Environmental is pleased to announce the introduction of PetroSentry, a system that combines the revolutionary PetroSense DHP probe with a variety of loggers and communication devices to provide the user with a state-of-the-art in situ total petroleum hydrocarbon (TPH) monitoring system.For almost 20 years, FCI Environmental’s PetroSense probes have been the standard for above ground (AST) ...


    By PetroSense, Inc

  • ASTM D4129 - 05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection

    This test method is necessary because of the need for rapid reliable tests for carbonaceous material in waters and sediments. It is used for determining the concentration of organic carbon in water that comes from a variety of natural, domestic, and industrial sources. Typically, these measurements are used to monitor organic pollutants in domestic and industrial waste water. When a ...


    By ASTM International

  • NPL trials identify improved bioaerosol monitoring technology

    Trials conducted by the National Physical Laboratory (NPL) have identified improved methodologies for sampling and measuring bioaerosols at composting facilities. Commissioned by Defra, the first project began in 2008 and the results of a larger series of trials will be published later this summer. Background As the UK seeks to reduce the quantity of waste going to landfill, there ...


    By Air Monitors Ltd.

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you