waste separation technology News

  • Microemulsion Injection & Separation Technology (MIST)

    The SAS-ES MIST system is designed to combine the SAS-ES products with the right engineering setup. Chemical injection and the following separation of the waste into oil, water and solids can be achieved routinely if provided with the right setup and the right training for the team. This system allows for fast setup and implementation of the SAS-ES process. ES 20' MIST System is packaged ...


    By Elgin Separation Solutions

  • Innovative Dry Separation/De Dusting Technology of Aggregates waste streams

    Oy Cyclotec Ltd Reports introduction of innovative Dry Separation/De Dusting Technology of Aggregates waste streams previously not attractive for recycling. Up to date due to waste fines contamination most of the fraction smaller then 5-6 mm is not used. Dry screening at 5-6 mm and smaller fractions is not efficient. Wet de dusting methods ...


    By Oy Cyclotec Ltd

  • Flottweg Revolutionizes Separation Technology at IFAT 2018

    The IFAT expo in Munich is the world's leading trade show for water, wastewater, waste, and raw materials processing.  As an innovation driver in the area of mechanical separation technology, Flottweg will show off a revolution in sludge dewatering at IFAT 2018: the Flottweg Xelletor Series.  In comparison with our C-series, the Xelletor decanter centrifuges have even higher dewatering ...


    By Flottweg SE

  • Chinese waste treated with European technology

    Another pre-treatment plant for household waste was ordered for the south-east of China from the Austrian-German technology firm REDWAVE. By using mechanical biological treatment (MBT) it will dry and sort the waste for a local waste-to-energy (WTE) plant. The capacity of the facility will amount to 650,000 tons annualy respectively 1,800 tons per day. The purchaser of the plant is a private ...

  • New plastics separation technology increases recovery rates for acoustics material manufacturer

    A manufacturer of acoustics material, such as that found in car boots and bonnets, is recovering more waste material for re-use in new products by using new plastics separation technology. Axion engineering, a division of Axion Consulting, has helped design and install an air-flow separator for Niko Coatings, a manufacturer of acoustic insulation and carpet backing materials. The innovative ...

  • econ VacuDry Technology safely separates oil, water and mercury from the solids

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. Our VacuDry® technology (vacuum distillation) is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM. Treatment of drill cuttings is ...

  • Largest spectrum of separation technology worldwide Steinert and RTT agree a share takeover

    After intensive negotiations, RTT Systemtechnik GmbH in Zittau and Steinert Elektromagnetbau GmbH in Cologne are pleased to announce the joint occur of their companies forming RTT Steinert GmbH. Consolidating the sensor technology of RTT Systemtechnik GmbH and the magnet and sensor technology of Steinert Elektromagnetbau GmbH, the new company will offer a complete product range of separation ...

  • Airvac Airlift Separation Units

    Screenpod AirVac airlift Separators, in design we are trying to produce real world solutions using an array of vacuum technologies incorporating various drives from electric, hydraulic & diesel engine. A cost-effective solution can be found for removal of plastics or light contamination from compost, bark, skip waste rejects and second generation recycled aggregates. Screenpod take a view to ...


    By Screenpod International

  • Metals separation experience

    Various cases solutions of metals separation from electronic scrap, plastic, rubber, urban waste and any other material you will find at Enstorga-Enteco exhibition in October 2009. Italian metal separators producer and skilled specialist - COGELME S.A.S brings extensive metals sorting and recycling experience for individual cases discussions, exchange of information and just for meeting or ...


    By Cogelme S.r.l.

  • World Membrane Separation Technologies demand to rise 9.2% annually through 2017

    Worldwide demand for membranes is projected to increase a healthy 9.2 percent annually to $25.7 billion in 2017. Ongoing economic improvement through 2017 will boost gains in several key geographic markets where the global recession of 2009 and subsequent slow recovery restrained manufacturing activity and capital investments through 2012. Rising environmental standards and regulations in many ...


  • At BrauBeviale 2016, Flottweg Presents Separation Technology Solutions from a Single Source

    At the BrauBeviale 2016 from November 8 to 10, Flottweg will be presenting its brand-new decanter Z3E. This machine rounds out Flottweg's product line to offer even smaller industrial concerns an attractive centrifuge concept. Visit us at BrauBeviale 2016: Hall 6, Booth 107! Despite its smaller size, this modular machine boasts all the features and customization options ...


    By Flottweg SE

  • Waste Refinement, LLC Announces New Alternative Technology to Process Waste Materials

    Waste Refinement, LLC, today announced that it is bringing to market a new, environmentally friendly alternative to the management of waste -- a proven, green technology that will transform the way communities process their waste. Who would have thought, even five years ago, that the garbage man would be the one to bring about the next transformational innovation. Waste Refinement has ...


  • Technology for TASi: High-tech equipment for waste treatment

    It wasn't a law but a simple administrative regulation in the form of a technical guideline that provided the key impulse for the diversion of waste flows in Germany away from landfill sites. In the course of the implementation of this Technical Directive on Residential Waste (TASi), the technology for treating waste underwent an extraordinary development. This is especially true of thermal ...


    By Koelnmesse

  • High tech waste vacuum technology, a first for the UK

    For the first time in the UK rubbish can be transported through a system of underground vacuum pipes. The Envac system, in a housing development next to Wembley stadium in west London, does away with kerbside collections and goes underground. Envac is a Swedish-based firm that makes underground vacuum waste collection systems. Sweden has been using this system for 30 years and the system is ...

  • Mattress waste management technology introduced to Asia market

    Mattress waste is a kind of bulky waste which is not easy to deal with. Generally mattress is made of cloth, sponge, metal spring, wood and other materials. As mattress is an essential item for every family, a great deal of mattress waste are produced every day to the city. How to turn such massive mattress waste into valuable items? European countries has many years of mattress waste management ...

  • Biowaste separation at Olympic Games in Beijing

    The conference centre at the Beijing Olympic Games will be equipped with a negative pressure transfer tube system for biowaste disposal developed by Puzair. In the system, biowaste travels from the conference centre’s 29 waste-collection points to a centralized waste-collection site. The total length of the network is 1.7 km. Thanks to Puzair's technology, biowaste can be separated from other ...


  • The new Sweco Multi-Motion separator

    Sweco has developed a new rectangular separator that can adapt as solids characteristics change. Combining the patented elliptical motion with linear motion technology, Sweco has created the Multi-Motion (MM) Rectangular Separator, a revolutionary separator that delivers the benefits of two distinct motions. The groundbreaking design of the MM allows operators to use linear motion where heavy, ...


  • Non-ferrous metals separator by Cogelme

    Functioning of Eddy Current separator for non-ferrous metals separation is based on physics low, thus has a clear, understandable and proved operation.Cogelme is one of Italian most skilful manufacturers of this technology. Company was founded and guided by important technology specialists. Which with physics and engineering science created a perfect force fields on eddy current separator to ...


    By Cogelme S.r.l.

  • Screening and shredding technology from Eggersmann for processing wood and bio-waste

    The Eggersmann Group has a wide-reaching product portfolio of high-performance shredders, screening machines and windsifters at its disposal to treat all kinds of materials. To process wood and bio-waste the company offers multiple solutions of well-known brands. Soon to be, an increase of waste wood and bio mass is expected in shredding and screening. For this reason, the demands in throughput ...


    By Eggersmann GmbH

  • Waste Management Launches New Food and Organic Recycling Technology in Orange County

    New Food and Organic Recycling Facility Features Innovative Technology to Transform Orange County Food and Organics into Green End Uses Waste Management of Orange County (WMOC) today opened its new Food and Organic Recycling Facility, featuring processing technology that is the first of its kind in Southern California. WMOC was joined by the Director of California Department of Resources ...


    By Waste Management Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you