wastewater measuring News
-
Measuring oil/grease levels in wastewater for compliance with permit requirements
Determining total oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem facing numerous industries. To ensure compliance with regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease concentration. Wilks Enterprise, Inc. ...
-
Fats, Oil and Grease Levels in Wastewater Measured On-Site in Under 10 Minutes
Stricter wastewater regulations worldwide are aimed at ensuring excessive levels of fats, oil, and grease (FOG) in wastewater are not being discharged. The InfraCal TOG/TPH Analyzers from Wilks Enterprise provide accurate, easy on-site analysis to help regulators and industry reduce the discharge and build up FOG in sewers. These analyzers are ideal for use by publicly operated treatment centers ...
-
Measuring oil/grease levels in water to help oil/gas industry comply with permit discharge regulations
Determining total oil/grease levels to ensure compliance with governmental regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil and gas industry. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease ...
-
Complete solution for data logging
Data transmission and data management! Your Data Will Reach You Quicker - Than You Can Reach Your Data! In times of rising costs for wastewater treatment, declining water resources and permanently new reports on floods, the demands on continuous and discontinuous measurement of water volumes and monitoring of special constructions are increasing rapidly. Since incomes of cities and communities ...
By NIVUS GmbH
-
Compliance with discharge permits for oil in water
Determining total oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem for the oil and gas industry. To ensure compliance with regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease (TOG) concentration. Wilks Enterprise, Inc. ...
-
On-Site Wastewater Analysis
The US EPA, as well as other governmental regulatory agencies, have instituted stricter regulations covering discharges of “oily wastes” from facilities into publicity owed treatment plants (POTWs) facilities, forcing numerous industries to monitor their effluent more closely prior to discharge. This regulations affect such industries as food – both processors and restaurants, metal fabrication, ...
-
Measuring hydrocarbon levels in wastewater in under 15 minutes
Determining total hydrocarbon or oil/grease levels to ensure compliance with governmental permit requirements for discharging wastewater is a worldwide problem facing numerous industries. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total hydrocarbon concentration. Wilks ...
-
New Video features Portable Infrared Analyzers for On-Site Measurement of Oil in Water/Soil
Wilks Enterprise is pleased to announce a new video featuring the measurement of oil and grease in water/soil with easy-to-use portable infrared analyzers. This 3-minute video demonstrates how on-site measurements with the InfraCal TOG/TPH Analyzers can save time and money, as they allow oil and grease levels in wastewater to be determined in under 15 minutes. These measurements help ensure ...
-
On-Site Oil in Water Measurements Ensure Compliance with Discharge Permits
Determining total oil in water levels for compliance with governmental regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil and gas industry. To ensure compliance with these regulations and avoid fines for exceeding permit discharge levels, more frequent wastewater measurements are necessary to determine the total oil/grease ...
-
Wastewater operator exam training and TCH courses
Practical Applications announces the second session of our rolling Massachusetts Wastewater Operator Training Exam Prep and TCH Courses. The next session begins on June 16th and continues for 8 weeks. You may attend any or all of the classes for this session, or combine them with the classes remaining in session one. Course details are as follows: DAY ONE Wastewater Chemistry Wastewater Math ...
-
Wastewater Meter - Measuring Sewage with Venturi Flowmeters
Municipal waste water treatment plants and industrial facilities treating waste water need reliable and accurate flow measurement to keep their systems working correctly. For over a century waste treatment plants have measured wastewater and sewage using venturi flowmeters. Why? Because a venturi offers a lifespan and reliability that is unmatched by any other metering technology on the market. ...
By BIF
-
ADS Introduces Gated Cross Correlation Technology
New FlowShark Pulse Monitors for Highest Accuracy Requirements (Huntsville, AL) - ADS® Environmental Services announces the addition of gated cross correlation technology to the FlowShark™ family of versatile and reliable flow monitors. The FlowShark Pulse and Portable FlowShark Pulse are high-performance liquid flow monitors for use in open and closed channels of virtually any shape. Designed ...
-
Showcase
Biogas Moisture, Corrosion and Accuracy Issues Resolved With Rugged FCI Thermal ST100A Wet Gas Flow Meter
Featuring a rugged, highly accurate thermal dispersion flow sensor, the ST100A Flow Meter from Fluid Components International eliminates wet gas and entrained moisture issues affecting biogas measurement accuracy in wastewater treatment digester applications and landfill co-gen power systems, as well as providing down-the-pipe rain shielding in petrochemical refineries, power plants and other ...
-
On-Site Measurement of Oil/Grease in Wastewater Helps Ensure Compliance with Discharge Permits
Determining total oil/grease levels in wastewater for compliance with governmental regulatory discharge permits is a worldwide problem facing numerous industries including chemical, oil and gas, biofuels, and other industrial manufacturing plants. To ensure compliance with discharge regulations and avoid fines for exceeding permit levels, more frequent wastewater measurements are necessary to ...
-
Business and Public Sector organisations brace for impact as water bills soar!
It’s interesting that very little noise has been made within the media circles regarding the recent increases in water, wastewater, trade effluent and surface water charges for business and public sector customers, which are by any measure significant and will exceed many customers budget projections. For example, Southern Water’s water charges are up 18.3 percent and 13 percent for ...
-
Fluence Launches Energy Consumption Calculator for Wastewater Treatment Based on International Standard
In the past, there was no single trusted way for engineering consultants and utility owners to compare energy efficiency claims by various wastewater treatment manufacturers. Traditional measurement methods focused on different parameters and expressed energy in different formats leading to unreliable and inconsistent results. To solve this problem, experts created the ISO 21939-1:2019 standard, ...
-
IPP&T Features TOC analyzer
Those responsible for managing wastewater run-off treatment from commercial or private airports, aerospace industry facilities, military bases and chemical processing plants will want to learn more about how the advanced Total Organic Carbon (TOC) Analyzer from Electro-Chemical Devices (ECD) helps them manage ethylene glycol and other waste streams to safeguard water resources. While primarily ...
-
Automation World features HYDRA-DS Nitrate analyzer
Analyzers Simplify Nitrogen (Nutrients) and Ammonium Measurement The nitrate analyzers are designed to monitor the nitrification process directly in a wastewater treatment plant’s aeration basin or clarifier unit. Its advanced sensor uses ISE technology to measure the concentration of dissolved nitrate as nitrogen (NO3-N) in water.. Also featuring a self-compensating design, the unit ...
-
Data logging open channel flow meter prepares flow reports
This new model OCF 4.0 Open Channel Flow Monitor uses a non-contacting ultrasonic sensor to measure wastewater flow through flumes or weirs. It features a powerful, built-in data logger with on-screen flow reports plus Windows software to retrieve, display and graph flow reports in fully customizable formats. Other OCF 4.0 features include isolated 4-20mA, 0-5V, USB and RS232 outputs, 3 ...
-
New Submersible Level Sensors Offer Unique Removable and Reusable Cage for Significant Savings in Harsh Environments
LOGAN, UT - Automation Products Group, Inc. introduces the PT-500 Submersible Liquid Level/Pressure Transmitters. The PT-500 features a vented, watertight cable and delivers a high precision 4-20mA solid-state signal while submerged up to 450 ft. A unique (patent pending) removable stainless steel cage connects to the sensor with a simple snap ring and enables users to save significantly on ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you