water jetting nozzle News

  • New NLB water jet nozzle cleans tubes at up to 40,000 psi

    The new RPN4009, a self-rotating water jet nozzle from NLB Corp., cleans pipes and tubes at pressures up to 40,000 psi (2,760 bar).  Designed for a minimum pipe diameter of 0.75 inches (1.91 cm), it is the first nozzle in the Typhoon 10 series to operate at ultra-high pressure. Like other Typhoon nozzles, the RPN4009 is precision ...


    By NLB Corp.

  • DynaJets Useful Cavitating Jets

    Dynaflow, Inc. is pleased to announce DynaJets®: its high efficiency water jet nozzles. DynaJets® are capable of producing extremely erosive but controlled environments, enabling significant increases in cleaning, ...


    By Dynaflow, Inc.

  • Latest NLB catalog introduces new water jet accessories

    WIXOM, MICH... MARCH 2, 2011…NLB Corp. has released the 2011 edition of its popular water jet accessory catalog, the biggest edition ever.  The 106-page catalog can be requested at no charge from NLB, or downloaded from the company's website, www.nlbcorp.com. The 2011 ...


    By NLB Corp.

  • New ARM Lets Water Jet Operators Keep Their Distance

    The new Automated Remote Manipulator (ARM) from NLB Corp. is a semi-automated water jet system that increases operator protection while reducing downtime.  It lets an operator manipulate a variety of accessories from the safety and comfort of a climate-controlled cab, using convenient joystick controls to position them and to ...


    By NLB Corp.

  • Kynar PVDF Jet Aerator For Improved Wear Resistance

    An inside look at KLa’s Jet Aerator Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles.  The inner nozzle (see above) is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s.  Traditionally, ...


    By KLa Systems, Inc.

  • Typhoon™ 10 nozzles clean small pipes with less leakage

    Two new Typhoon™ 10 rotating water jet nozzles from NLB Corp. clean pipes as small as 5/8-inch (1.6 cm) in diameter and use water more efficiently than other rotating nozzles. The Typhoon™ 24-10 is for applications requiring water pressure of up to 24,000 psi (1,680 bar), while the Typhoon™ 15-10 is for pressures up to 15,000 psi (1,035 bar). These self-propelling nozzles rotate at up to 7,000 ...


    By NLB Corp.

  • NLB introduces two new self-rotating tube cleaning nozzles

    NLB has introduced two new Typhoon™ 10 selfrotating nozzles that clean pipes and tubes as small as 1/2” in diameter. The RPN1506 operates at pressures up to 15,000 psi and the RPN2006 at up to 20,000 psi. Both rotate at 7,000 rpm with a maximum flow of 6 gpm. Like other Typhoon nozzles, these new nozzles are precision-machined and coated with titanium nitride for long life. You can ...


    By NLB Corp.

  • New NLB pipe and tube nozzles offer more choices

    NLB Corp. has introduced a line of high-pressure water jet nozzles for cleaning small pipes and tubes that features five major styles and more than 200 models with standard drill patterns.  Custom nozzles are also available.  Included in the new line are: standard nozzles for applications requiring 15,000 psi, 20,000 psi or 40,000 psi (1,035 bar, 1,380 bar, or 2,800 bar) ...


    By NLB Corp.

  • NLB introduces 20,000 psi and 15,000 psi self-rotating nozzles

    NLB has introduced two new Typhoon™10 series self-rotating tube cleaning nozzles for tubes with diameters of at least 0.75 inches.  The RPN 2020 is rated for a maximum operating pressure of 20,000 psi and the RPN 1520 for up to 15,000 psi. Both new models rotate at 7,000 rpm, with maximum flow of 20 gpm.  Both ...


    By NLB Corp.

  • Special ejectors for waste water aeration

    Körting waste water aerators are extremely reliable and require very little maintenance. For industrial and local-authority treatment of waste water, they are considered powerful and cost-effective oxygen transfer systems. By liaising closely with the client, Körting experts enhanced an outdated system supplied in 2004 and therefore boosted its service life considerably. Removing ...


    By Körting Hannover AG

  • StarJet™ system preps runway used for space shuttle landing

    When the space shuttle Endeavour made its final landing Sept. 21 at Los Angeles International Airport (LAX), it arrived on a runway maintained by a StarJet™ pavement marking removal system from NLB Corp. The StarJet, operated by Sterndahl Enterprises, Inc. of Sun Valley, Calif. removes old runway markings and rubber build-up with high-pressure water jets (up to 40,000 ...


    By NLB Corp.

  • Rotating Line Moles expand pipe cleaning options

    A new family of Rotating Line Moles (RLM) from NLB gives users more than 40 choices to clean pipes and tubes with high-pressure water.  Designed for tubes with diameters from 0.5 inches to 1.5 inches (1.27 cm to 3.81 cm), they feature operating pressures of 10,000 psi or 20,000 psi (700 bar or 1,400 bar).  A variety of flows and nozzle patterns lets users create the most effective ...


    By NLB Corp.

  • Coating shafts: substrate preparation perfected

    For an effective and long-lasting – and hence economical – shaft coating, careful and thorough cleaning and preparation of the substrate is essential. HERMES Technologie, had been successfully developing coating procedures using ERGELIT dry mortars for over 20 years, launching the M-Coating process on the market in the late 1990’s, and very quickly complementing it with an ...


    By HERMES Technologie Ltd.

  • New Torrent™ 200 has higher flow for tank cleaning

    The Torrent™ 200, a new 3D water jet head from NLB Corp., combines high flow with high horsepower to increase the efficiency of tank, tote and reactor cleaning.  It is rated at up to 200 gpm (757 lpm) and 2,300 hp (1,715 kW). The Torrent 200 rotates horizontally ...


    By NLB Corp.

  • NLB introduces 24,000 psi multi-gun valve

    NLB Corp. has introduced the MGV24-1200, a new multi-gun valve that allows two or more high-pressure water jet lances (or other accessories) to be operated from the same 24,000 psi pump unit and can be rebuilt in the field in just five minutes. The MGV24-1200 can be used with any ...


    By NLB Corp.

  • AquaOnDemand Exhibits at the 2013 Pumper and Cleaner Environmental Expo International

    The Water and Wastewater Treatment experts from AquaOnDemand will be exhibiting at the annual Pumper and Cleaner Environmental Expo International in Indianapolis from February 26-28 in Booth 1214. The AquaOnDemand web store was launched at this show last year to service the people that build, operate and maintain water and wastewater treatment facilities. ...


    By Aqua-Aerobic Systems, Inc.

  • Membrana commercializes small 0.5 x 1 MicroModule® Membrane contactor

    Membrana is pleased to announce the full commercialization of its 0.5 x 1 MicroModule® Membrane Contactors. The 0.5 x 1 MicroModule is available in two models that utilize different membranes. These membrane contactors were engineered specifically for two very different applications. The first contactor is used to debubble and remove gasses from low surface tension fluids such as ink, coating ...

  • STEM Drive Mark III Fluidic Mixer

    As part of the continual research and development programme at STEM Drive we are pleased to announce the arrival of the Mark III Fluidic Mixer onto our ever increasing range of mixers. Following on from the well proven track record of the STEM Drive Fluidic Mixers the Mark III incorporates an improved and refined nozzle jet arrangement. This enhanced design not only improves the throughput ...


    By STEM Drive Ltd.

  • Relocation: Koerting do Brasil grows at its new facilities

    In August Koerting do Brasil moved to its new offices in the Rua Adip Avada 35, Cotia. The path continues in the direction of further growth: Apart from Brazil, the field of business is to be extended to cover the whole Latin-American market in future. “With the relocation to the new and larger rooms we are well positioned for further growth”, as Tomas Eriksson, Sales Manager and ...


    By Körting Hannover AG

  • Körting at Achema 2015

    The 31st Achema, a global showcase for the chemical engineering and processing industry, will take place from 15 to 19 June 2015 in Frankfurt am Main, Germany. Held every three years, it’s a trendsetting meet-up in the industry. For Körting Hannover AG it’s also important because it indicates many key developments. Decisions on investments and the associated large orders are ...


    By Körting Hannover AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you