water turbidity measurement News

  • New in-pipe monitor for turbidity and flow

    Intellitect Water has launched a new version of the Intellisonde in-pipe water monitor that has been designed specifically to help decisions relating to both water quality and network hydraulics. The new instrument, ‘IntellisondeTF’, will monitor just turbidity and flow, and will provide drinking water distribution network managers with a unique insight into water quality after it ...


    By Intellitect Water Ltd

  • White light turbidity meter provides rapid analysis of drinking water quality

    Camlab, one of the UK's leading scientific equipment suppliers, has launched a new, easy-to-operate turbidity meter that uses a white light source and a 90 degree infrared detection technique to meet the specifications for EPA turbidity measurement (EPA Standard 180.1) which is a standard procedure for analysing the quality of UK drinking water. The portable Camlab Water TB200 white light ...


    By Camlab Limited

  • New on-line turbidity meter from LaMotte

    For Drinking Water Turbidity Measurements: The 2020 ClearTrace Turbidity System is designed for continuous monitoring of low-level turbidity in drinking water applications. It has a measurement range of 0-200 NTU, but is optimized for the important 0-1.0 NTU range. The system also measures water temperature. Data is reported through a local display and a scalable 4-20 milliamp current output. ...


    By LaMotte Co

  • High Resolution Turbidity Monitoring for protection against Cryptosporidium – using a photometer for continuous measurement

    High Resolution Turbidity Monitoring for protection against Cryptosporidium – using a photometer for continuous measurement. It is widely known that parasites such as Cryptosporidium in potable water are dangerous for human health: diarrhoea, head-ache, sickness, and even death if the immune system of the affected person is compromised. It is therefore a critical duty of all potable water supply ...


    By Sigrist-Photometer AG

  • Withdrawn Standard: ASTM D6181-03 Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin (Withdrawn 2012)

    This test method covers the laboratory procedure that ascertains the quantity of suspensions in insulating oils of petroleum origin using a nephelometric measurement technique to determine the fluid's turbidity. This test method is ...


    By ASTM International

  • Exclusive: Introducing the new TurbiTechw2 D-ISO turbidity sensor

    We have some exciting news and you are the very first to read about it! This 2nd – 3rd November at the WWEM Show in Telford we will be launching the latest sensor in Partech’s WaterWatchw2 range – the ...


    By Partech (Electronics) Ltd.

  • Automated water analysis of pH, EC, alkalinity, turbidity and colour from a single 50ml sample

    Environmental laboratories, challenged with ever increasing sample loads for human and environmental protection, are analysing more potable, surface and ground waters than ever before.  These laboratories have expressed their desire to run more parameters from a single sample with larger batch sizes, unattended. UK experts in water analysis, Camlab have recently announced a new development ...


    By Camlab Limited

  • New Intelligent Triton TR6 Turbidity Sensor with Advanced Infrared (IR) Optical Technology

    Ideal for Environmental Monitoring, Wastewater Treatment Discharge, Filter or Backwash, Clarity in Settling Ponds, Surface Water, Rinse Water Control With advanced optical infrared (IR) sensing and intelligent electronics, the versatile Triton TR6 Turbidity Sensor from Electro Chemical Devices, Inc., measures turbidity or suspended solids and can be combined with ECD’s ...

  • Mettler-Toledo Thornton publishes white paper: “Improving Water System Performance – Continuous Real-Time TOC Measurements”

    Mettler-Toledo Process Analytics Division announced the publication of a white paper entitled “Improving Water System Performance – Continuous Real-Time TOC Measurements.” This paper discusses the importance of rapid, continuous and reliable TOC (total organic carbon) measurement and control for critical water release in pharmaceutical manufacturing. In pharmaceutical ...


    By Mettler - Toledo Int. Inc

  • ProMinent at ACHEMA 2015 - DULCOTROL® Drinking Water/F&B and DULCOTROL® Waste Water: Compact, application-optimised measuring and control systems

    Modular in design, the new panel-mounted measuring and control system DULCOTROL® offers users a high degree of flexibility. ProMinent is presenting the complete measuring points on Stand J94 in Hall 8 at the ACHEMA 2015. The compact, application-optimised online measuring and control units have been specifically tailored to the requirements of the potable water and food and beverage ...

  • ProMinent at IFAT 2016 - Compact, application-optimised measuring and control systems

    Modular in design, the new panel-mounted measuring and control system DULCOTROL® offers users a high degree of flexibility. ProMinent is presenting the complete measuring points at IFAT in Munich between 30 May and 3 June 2016, at stand 439/538 in Hall A3. The compact, application-optimised online measuring and control units have been specifically tailored to the requirements of the ...

  • Water quality information in Hawaii

    New information about water quality is now available to people living, working, and playing near Hawaii. U.S. Integrated Ocean Observing System (IOOS®) partners located within the Pacific Islands region recently installed new nutrient sensors on two water quality buoys located at Kilo Nalu and near the Ala Wai outflow. These new sensors will provide early warning of storm runoff or other poor ...

  • Water analysis of small samples

    Water analysis specialists Camlab has introduced a water analyser that can measure up to nine parameters in a single sample that can be collected in a standard 50ml falcon tube. The Camlab analyser is manufactured by Mantech, which develops automated multi-parameter analysers. The analyser can test potable, surface and ground waters for ...

  • Water Quality System

    Let me explain that our basic idea is how better to use the not many typologies (and parameters) of on-line sensors available on market to make low-cost sustainable intelligent monitoring. We all know that the total water quality is related to about fifty of quality measurement analytic parameters, but on-site and in on-line way, it is possible to detect only about ten electro-chemical or ISE ...

  • Intellisonde improves water security

    The US Environmental Protection Agency (EPA) is testing commercially available water quality sensors for their ability to provide a warning of deliberate or unintentional contamination events. The Intellisonde in-pipe water quality monitor from UK-based Intellitect Water is one of several instruments being assessed at its Ohio Test and Evaluation Facility. The project's work on water quality ...

  • Water contamination detector

    A contamination event at a UK water pumping station was successfully detected by the Chelsea Technologies FASTtracka II system. The event was automatically detected using the FASTtracka II, Fast Repetition Rate (FRR) chlorophyll a fluorometer combined with a novel Red, Amber, Green (RAG) algorithm, which has been developed to provide continuous, real-time protection for water supplies at the ...

  • Intellitect water funding

    The company's flagship product, the Intellisonde TM features up to 12 sensors in a tiny sonde head that inserts directly into a pipeline. The IntellisondeTM logs water quality data and provides remote access to the data through a variety of telecommunication options. Uniquely, the IntellisondeTM technology offers utilities the ability to monitor water quality in the many ...


    By Intellitect Water Ltd

  • Water Sampling Update

    Summer field work has come to a close at the Newberry EGS Demonstration site, and with it we’ve completed the last round of water sampling and analysis. The EGS project was carefully designed to protect the local groundwater system, and our groundwater monitoring program helps us make sure we protect this valuable natural resource. Our water monitoring program was designed to document and ...


    By AltaRock Energy, Inc.

  • Certified Reference Materials for Water analysis

    For the Quality Assurance of your measurement results NMi and APG Certified Reference Materials for Wastewater and Drinking water are now available. Their use will result in a higher confidence of the quality and comparability of your laboratory measurement results. With these CRMs, you can obtain control of the performance of your laboratory. Current CRMs: Trace metals, Demand, ...

  • New portable water quality profilers

    Xylem Analytics has announced the launch of a new range of portable multiparameter water quality meters that have been designed for spot measurements and profiling of pH, ORP, conductivity, temperature, depth and optical dissolved oxygen, in both marine and freshwater applications. The new WTW MPP 900 IDS Multiparameter Sondes are able to take measurements at depths of up to 100m because of the ...


    By Xylem Analytics

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you