wear plate News

  • HD8 Extreme wear-resistant coating

    HD8 is an extremely wear-resistant coating made with an innovative, high-deposition welding technique. This coating has been specifically developed by our engineers in Wiener Neudorf CastoLab® who aimed to get a very high density of tungsten carbides homogeneously distributed within a nickel-based matrix at high deposition rates. Very high density of tungsten carbides in a ...


    By Castolin Eutectic

  • RUBBLE MASTER Compact Recycler stands out through wear cost optimisation

    With wear costs you would otherwise only expect from jaw type crushers, and high-quality crushed material, the RM80 had the edge for Georg Guth GmbH in Fürstenfeld.98% quartz content in the feed material – a true challenge for any crusher. That was the starting point prior to the decision for a crusher to handle 100,000 tonnes of quartz gravel. Some 400,000 tonnes can be found at the Fürstenfeld ...


    By RUBBLE MASTER HMH GmbH

  • U.S. EPA to begin cleanup of former plating shop in Paw Paw, Michigan

    U.S. Environmental Protection Agency Region 5 today will begin cleaning up hazardous materials at the site of Paw Paw Plating in Paw Paw, Mich. An abandoned building on site contains chemicals used in the electroplating process. The EPA expects contractors to complete the cleanup within 90 days. Paw Paw Plating began custom electroplating in the 1950s and stopped operating in December 2009. The ...

  • ANDRITZ launches the TurboJet weir plate, a power recovery system for decanters, reducing power consumption by up to 30%

    International technology Group ANDRITZ presents a new generation of weir plates, providing a significant reduction in power consumption for centrifuges. The patented TurboJet weir plate, available for all ANDRITZ decanters and those of other suppliers, helps customers to reduce their energy consumption by 10- 30%. This innovative product was developed in the ANDRITZ Separation Center of ...

  • Westeria’s newly designed pusher plate bins bottom bars always axially aligned

    The recycling specialists at Westeria Fördertechnik GmbH have optimized their product line of pusher plate bins. Designed as proportioning or feed bins, these bins are used as a preliminary stage in the recycling or waste treatment process, feeding materials downstream at a continuous, controlled flow. Bin walls are built to ensure maximum useful inside width and volume. A variety of sizes ...


    By eFACTOR3 LLC

  • Multi-Cut – our new multi talent of EHT

    A new powerful, hydraulic plate shear fully equipped is now modernising our production facility. It is perfectly suiting to our high-precision cut and serial production. Adjustment of die clearance and cutting angle, integrated handling systems like upholding mechanism of the plates and automatic refeeding of the plates to the machine’s front side provide a high throughput and improve our ...

  • Automated DS-A can compactor with a newly developed compacting system

    With this new designed press system DS-A 700 is pressing with 4 cylinders and 3 flaps in one cycle. This advanced development makes it possible to produce high density bales even with mixed materials. The DS-A 700 is trouble free and needs less maintenance as it is wording without knives. The press is controlled with a PLC from Siemens and can be expanded with data highway etc. Changeable and ...


    By Austropressen

  • New aluminium can baler also handles swarf

    JMC has launched a range of balers for handling steel and aluminium drinks cans, aluminium foil, swarf and turnings - materials which are notoriously difficult to process. The new Alpack 5000 RDI is a fully automated system which is able to condense aluminium or steel drinks cans down to 280mm cubes, with no need for strapping or banding. The machine has been enhanced with wear plates to ...


    By JMC Recycling Systems Ltd

  • Concrete mixer paddles, scrapers & arm protectors with extra service life

    The construction industry increasingly requires the production of homogeneous quality, ready-mixed concrete from ever-faster mixing cycles, particularly for precast / prestressed concrete. Different stationary concrete mixer models have been developed to process the raw materials (sand, water, aggregates and cement) which cause intensive wear and tear of certain key parts through abrasion and ...


    By Castolin Eutectic

  • Four Tips for Getting Your Sprinklers Ready to Roll

    Winter means downtime for sprinklers. As the new growing season approaches (in North America), it is important to get your machine ready, and the sprinkler package is a key item to focus on. Here are some tips to get your sprinkler package into tip-top shape: Use the sprinkler reports supplied with the sprinkler package and check that all sprinkler ...


  • CM Introduces New CM2R Liberator

    CM Introduces New CM2R Liberator  For Immediate Release: May 27, 2010 - Columbus McKinnon Corporation, Sarasota, Florida is pleased to announce the latest product development. The newly designed CM2R Liberator. (2 Rotor) Due to the enormous success in the Industry from the larger CM4R Liberator, a new, smaller, more affordable version has been ...

  • ANDRITZ to supply equipment for recycled fiber system to Sonoco-Alcore, Finland

    International technology Group ANDRITZ has received an order from Sonoco-Alcore, Finland, to supply pulping and de-trashing equipment for the OCC stock preparation line at the Karhula paper mill. Start-up is scheduled for the third quarter of 2016. The order comprises supply of a new ANDRITZ FSR pulper rotor and a screen plate for the existing low-consistency pulper, a completely new de-trashing ...

  • 54 m3 Hardox Scrap Trailer from Arslan

    Arslan Damper will provide a big advantage to its customers with 54 m3 new generation Hardox Scrap Trailer developed for the scrap industry. The name of new model is ARS 10000. ARS 10000, the new model scarp trailer developed in Arslan Tipper facilities located in Aliaga Organized Industrial Zone gets big attention. ARS 10000, developed by the Arslan Damper engineers, weights 2-3 tonnes lighter ...

  • 2-STAGE REDUCTION SWING HAMMER MILL FROM STEDMAN

    Aurora, IN - Stedman manufactures a 2-Stage Reduction Swing Hammer Mill for pulverizing, crushing and disintegrating rendering byproducts, wood, chemicals, minerals, garbage, fertilizer, aggregate materials, grain and more at a lower cost per ton. Materials in this unit are disintegrated/shattered by the revolving hammers upon entry and are further reduced by the force of impact against the heavy ...


    By Stedman

  • Olympus Introduces its New Dual Linear Array Probe for Fast, Simple, and Reliable Corrosion Imaging

    Olympus, a world leader in nondestructive testing technologies, is pleased to announce the introduction of its new Dual Linear Array probe designed to improve the inspection of internally corroded parts such as pipes, tanks, and plates. The new Dual Linear Array probe provides the inspector with several advantages over conventional ultrasonic dual element transducers that are typically used with ...


    By Olympus

  • 64 m3 Hardox Tipper Trailer from Arslan

    Arslan Damper will provide a big advantage to its customers with new developed 64 m3 new generation Hardox body trailer in order to carry sunflower seeds, pulp and similar light products. The name of the new model is ARS 12000. 64 m3 ARS 12000 developed in Arslan Tipper facilities located in Aliaga Organized Industrial Zone gets big attention. ARS 12000, developed by the Arslan Damper engineers, ...

  • Removal and clean up work begins at Attleboro, Mass. site; public meeting on Monday, Oct. 18 (MA)

    Clean up of the hazardous waste at the former Walton & Lonsbury facility at 78 North Ave., Attleboro, Mass. begins next week on Oct. 19. EPA will also hold an informational Public Meeting to discuss the work on Monday, Oct. 18 at 7:00 p.m. in the Municipal Council Chambers at Attleboro City Hall at 77 Park Street. Walton & Lonsbury, Inc. operated the 13,500 square foot chrome plating ...

  • Castolin Eutectic invests in extended production capabilities in China

    On an expansion path for more production space, Eutectic Castolin China moved on 5th October into new facilities near Pudong New Area, Shanghai. Twice as large as the former manufacturing and office area, the new 3,200 m2 factory is located close to the airport. The company currently manufactures CDP® wearplates and cored wires, with further investments planned in 2016 for additional ...


    By Castolin Eutectic

  • RUBBLE MASTER RM80 goes `down under`

    ADELAIDE / AUSTRALIA. After several RUBBLE MASTER RM60 have been working in Australia for years, now the time has come for the powerful Compact-Recycler RM80 and the smart RM70. The new RUBBLE MASTER dealer for Australia and Asia/Pacific Wieland Process Equipment Pty Ltd from Liverpool are facing a great deal of interest in the mobile crushing facilities RUBBLE MASTER equipment offers. So David ...


    By RUBBLE MASTER HMH GmbH

  • Eaton Increases Uptime for Oil, Gas and Mining Applications with New Airflex Water-Cooled Brake

    Power management company Eaton today announced the launch of Eaton’s Airflex WCBD3 and WCSB3 Water-Cooled Third Generation Brake, a disc type, water-cooled dynamic tensioning brake designed to keep oil, gas and mining operations up and running. The latest design helps dissipate extremely high thermal energy loads experienced in applications like drawworks, marine winches, cranes, metal ...


    By Eaton Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you