wood chip production News

  • Master Magnets maximise ECOs’ wood chip profits

    Major UK composting company ECO Sustainable Solutions recently contacted Master Magnets Ltd with a metal contamination problem, which if solved, would significantly increase the value of their wood chip.ECOs’ wood chip is supplied for many different uses including playgrounds, pathways, gardens and parks. It is for this reason that the 50mm wood chip is required to be a completely metal-free end ...


    By Master Magnets Ltd

  • Optimal separation of iron particles from wood chips

    Goudsmit Magnetic Systems BV has developed overbelt electro magnets that are suitable for dusty explosion-sensitive environments in ATEX 22 zones. These magnets are suitable for the removal of iron particles from recycling and/or bulk handling .material flows such as wood, garbage, RDF (Refuse Derived Fuel), hard coal, or cement. In short, materials that will be increasingly recycled and/or used ...

  • Pellets from Chips - New Method to make Fuel Pellets from Wood Chips

    Kahl’s new method of making fuel pellets from wood chips met with great interest at the World Bioenergy fair in Jönköping, Sweden. “The same equipment functions as both a mill and a pellets press,” says the German company’s Swedish representative, Patrik Pålsson. The new mill and pellets press comes in several sizes. The biggest one processes five to six ...


    By Elmia AB

  • Morbark introduces new drum for increased chip quality

    After substantial design analysis and in-field testing, Morbark today introduced it’s new Advantage 3 high performance chipping drum, which significantly improves chipquality in large volume wood chipping equipment and reduces recurring wear-part and maintenance costs approximately 70%, to just a fraction of the cost of conventional chipping drums. Most of the significant ...


    By Morbark, LLC

  • New quick-conversion kit allows Morbark grinders to produce chips

    Morbark, Inc. announced the successful demonstration of a quick conversion kit that enables horizontal grinders to produce chips in addition to mulch. In a live demonstration today at the company’s Demo Days event, Morbark produced high quality chips with a Morbark® 4600XL Wood Hog™ Horizontal Grinder configured for chipping, and demonstrated the same machine grinding with its usual hammermill ...


    By Morbark, LLC

  • Non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction. It involves mainly shredded aluminium components but also non-ferrous metals such as ...

  • GBP 750k wood recycling plant opens in England

    A wood recycling consultant from Manchester has opened a GBP 750,000 chipping facility in West Yorkshire off the back of his best-selling autobiography. Stuart Howarth, who was catapulted to fame this summer through his book 'Please daddy, no', has opened a 4 acre site in Kinsley near Pontefract.Howarth Environmental has already started processing 15,000 tonnes of waste wood in West ...


    By Howarth Environmental Ltd

  • Using genetic markers to trace oak wood barrels

    Researchers at INRA Bordeaux-Aquitaine have identified new genetic markers and developed genotyping technology that can identify species and determine if a lot of oak wood matches its stated provenance. The technology is flexible, quick, accurate, and cost-effective. To make it available to wine-barrel industry stakeholders (forest managers, stave mills, coopers, winemakers), the technology will ...

  • Enviva LP Announces Wood Pellet Facility in Virginia

            WASHINGTON, Nov. 30, 2011 /PRNewswire/ -- Enviva LP ("Enviva"), a leading manufacturer of processed biomass fuel in the United States and Europe, today announced that it is planning to build a 454,000 metric ton wood pellet ...


    By Enviva Pellets, LLC

  • Baetsen the second:A new waste wood processing plant will be build together with Vecoplan!

    Baetsen is establishing a new scrap wood processing plant in Son, a suburb of Eindhoven, the Netherlands, for the processing of 200,000 tons of waste wood per year. This corresponds to a performance of approx. 50 t/h for 250 working days at a rate of 16 hours per day. For this new plant, Vecoplan will deliver almost all the machine technology necessary to process the waste wood. Most of the ...


    By Vecoplan AG

  • Shredding technology presents new opportunities for wood recycling and biomass sector

    A new electric-drive shredder designed and engineered by Austrian headquartered UNTHA, is set to increase capacity, profitability and safety levels in the pioneering wood recycling and biomass market. And, unusually for this sector, the ground-breaking technology is now available as either a static or ...


    By UNTHA Shredding Technology

  • Vyborgskaya Cellulose and Ekman & Co collaborate on the world's largest wood pellet plant

    Vyborgskaya Cellulose is building the world's largest wood pellet plant at its facility in Russia near the border with Finland. Production capacity will be over 900,000 tons per year. Construction of the plant is underway and production is planned ...


    By Thomson Reuters

  • Dust defeated at wood recycling plant as Landia’s choppers pump recycled rainwater

    Tough MPTK Chopper Pumps made by Landia are playing a key role in the success of R. Plevin & Sons’ waste wood recycling business at Retford in Nottinghamshire. Recycled rainwater from R. Plevin & Sons’ holding reservoir (capacity 1.5 million litres), is pumped by the Landia MPTKs to water cannons, which damp down wood stored on a two and a half acre concrete pad. This process ...


    By Landia

  • Increasingly stricter quality requirements for suppliers - non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction.  It involves mainly shredded aluminium components but also non-ferrous metals ...


    By Goudsmit Magnetic Systems BV

  • ConocoPhillips, Enviva LP Partner to Develop Torrefied Wood Pellet Business

    Enviva LP ("Enviva"), a leading manufacturer of processed biomass fuel in the United States and Europe, today announced that it has partnered with ConocoPhillips, a prominent international oil and gas producer, to create a new company, ECo Biomass Technologies ("ECo Biomass"), which will bring torrefied biomass fuels to market. ECo Biomass, ...


    By Enviva Pellets, LLC

  • New routes in pellet production

    While the wood materials industry, wood-burning power stations and the pellet industry argue over the increasingly valuable raw material, wood, the pellet producers have decided to pursue a different route. Roundwood which cannot be directly recycled is barked and cut into short lengths. This roundwood frequently contains metal chips and is therefore unsuitable for use with chipping knives. ...


    By Vecoplan AG

  • Enviva LP Plans Second Wood Pellet Facility in North Carolina

    Enviva LP (“Enviva”), a leading manufacturer of processed biomass fuel in the United States and Europe, today announced plans to build a wood pellet manufacturing facility in Northampton County, N.C. The new plant received grant support from the state’s One North Carolina Fund and could be operational as early as October 2012. This will be ...


    By Enviva Pellets, LLC

  • MHG Systems to join forces with ACFOR, a New Brunswick-based wood fuel pioneer

    MHG Systems and ACFOR today announced a Letter of Intent to implement MHG’s complete ERP solution for bioenergy production processes. Implementation of ‘Biomass Manager’ marks a key step in development of sustainable supply chains necessary to support wood-chip based heat production in New Brunswick and Prince Edward Island Canada. The parties aim to kick-off cooperation ...


    By MHG Systems Ltd

  • Japan’s most powerful wood gas-fueled plant, powered by GE wins Asian power award

    Japan’s most powerful wood gas-to-energy power plant, powered by two of GE Energy’s Jenbacher gas engines, has won the Gold Award for the Best Renewable Energy Power Plant of the Year, conferred by Asian Power magazine. The innovative project generates power from an abundant, renewable biomass resource that would otherwise be treated as rubbish, demonstrating opportunities for future ...


  • ANDRITZ to supply key production technologies for new bio-product pulp mill in Finland

    International technology Group ANDRITZ has signed a letter of intent with Metsä Fibre to deliver key production technologies for a new bio-product pulp mill with an annual capacity of 1.3 million tons of pulp in Äänekoski, Finland. The order value for ANDRITZ is over 100 million euros. Start-up of the planned mill is scheduled for August 2017. ANDRITZ’s scope of supplies ...


    By ANDRITZ AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you