wood shear News

  • 2013 China-ASEAN Forest and wood Products Expo

    2013 China-ASEAN Forest and wood Products Expo November 12, 2013 On Nov 15 ~ 18, 2013, the 2013 China-ASEAN Forest and wood Products Expo is held in Nanning International Conference & Exhibition Center. On this Expo, woodworking machines, and a variety of wood products are exhibited. Many manufacturers & supporting manufacturers are ...


    By V&T Technologies Co., Ltd.

  • ASTM C393 / C393M - 11 standard test method for core shear properties of sandwich constructions by beam flexure

    Flexure tests on flat sandwich construction may be conducted to determine the sandwich flexural stiffness, the core shear strength and shear modulus, or the facings compressive and tensile strengths. Tests to evaluate core shear strength may also be used to evaluate core-to-facing bonds. This test method is limited to obtaining the core shear ...


    By ASTM International

  • ASTM D5055 - 11a Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

    This specification gives procedures for establishing, monitoring, and reevaluating structural capacities of prefabricated wood I-joists. Capacities considered are shear, moment, and stiffness. Procedures for establishing common details are given and certain design considerations specific to wood I-joists are ...


    By ASTM International

  • Used 500 Horsepower High Volume, Large Material SSI 6000 Shredder

    SSI 6000 is a low-speed, high-torque, two-shaft, rotary shear shredder designed to ef!ciently process a variety of dif!cult materials. High Volume Municipal Waste Heavy Industrial Waste Oversize Bulky Waste Demolition Waste Steel Drums / Ferrous Wood / Pallets Passenger,Truck and OTR Tires Baled & Bulky Materials and more… This Shredder will be ...

  • ASTM D907 - 11a Standard Terminology of Adhesives

    1. Scope 1.1 This terminology standard is a compilation of definitions used in the science and technology of the adhesives industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 Any changes in this standard since 1988 are documented as follows 1.2.1 Appendix X1 gives a ...


    By ASTM International

  • High-Torque Screen Classifying Cutter

    A new high-torque, low-speed model SCC-15-SS Screen Classifying Cutter reduces hard materials and friable products into controlled particle sizes. A proprietary rotor design comprised of cutter bits attached to a helical array of staggered holders called "interconnected parallelograms," continuously cut and crush oversize materials ...

  • Morbark, Inc. introduces new externally adjustable safety element for break-away

    Morbark, Inc. has introduced a new externally adjustable safety element that can help protect the driveline and hammermill from catastrophic damage from foreign objects. The unit can be easily adjusted in the field, saving downtime and reducing expenses. This device is available on all Morbark 3800, 4600XL, 6600 and 7600 wood hogs models. The full breakaway torque limiter system protects the ...


  • ASTM C1280 - 11 Standard Specification for Application of Gypsum Sheathing

    This specification covers the minimum requirements for and the methods of application of gypsum sheathing for use as a substrate for exterior wall cladding. Gypsum sheathing board is a substrate that shall be covered by an exterior cladding or other weather-resistive barrier and is not intended for long-term exposure. Framing members shall be installed so that the surface will be in an ...


    By ASTM International

  • Air pollution causing stronger cyclones, study finds

    Air pollution from soot and aerosol emissions is making cyclones over the Middle East and South Asia more destructive, according to a study. Natural differences in wind speed and direction over different heights in the atmosphere, known as 'wind shear', normally keep cyclones in check — effectively tearing the storms apart before they reach a certain size. But emissions from sources such ...


    By SciDev.Net

  • Dallas Contracting Co., Inc. Completes Boiler Rigging Project

    Dallas Contracting Co., Inc., a specialized contractor providing demolition services, onsite concrete aggregate crushing and scrap metal recycling to various industries, recently completed the demolition of an industrial site in Northern New Jersey. National Demolition Association member Dallas Contracting Co., Inc. (Dallas Contracting) recently completed the demolition of an industrial ...


  • R. Baker & Son All Industrial Services completes large industrial demolition project in NJ

    R. Baker & Son All Industrial Services, a specialized contractor providing total plant dismantlement, building demolition, rigging and decommissioning services, completed the demolition of a large chemical manufacturing facility in New Jersey (NJ).The facility, which formerly manufactured a variety of chemicals, consisted of over sixteen (16) multi-story buildings and was situated near a major ...

  • Historic look back at large airport demolition project

    R. Baker & Son All Industrial Services performed the demolition of JFK’S American Airlines Concourse “C” and Terminal in December 2000 and completed the project by the end of June 2001. This high profile project called for very tight security and very stringent safety precautions.R. Baker & Son All Industrial Services’ (R. Baker & Son) standard operating procedures called for daily ...

  • Universal Wrecking Corp. completes demolition of concrete aggregate plant in PA

    Universal Wrecking Corp., a premier demolition, scrap metal recycling and wrecking contractor that operates on a nationwide basis, recently completed the demolition of concrete aggregate plant in Hazelton, PA. The property needed to be razed in order to make way for redevelopment. The client selected Universal Wrecking Corp. (UWC) based upon their attention to safety, professionalism and ability ...

  • Screen Classifying Cutter Controls Particle Sizes

    A new Screen Classifying Cutter from Munson Machinery reduces hard, soft and fibrous materials into controlled particle sizes at high rates with minimal fines. Model SCC-15-B features a proprietary rotor design comprised of cutter heads attached to a helical array of staggered holders called "interconnected parallelograms" that ...

  • Leading Companies from Waste Management Industry will Participate in ‘Save the Planet’ 2014

    Coference Registration Early Bird Fees - till 7 February Taking into account the current challenges, the Exhibition & Conference ‘Save the Planet’ will stimulate the technological progress in waste management and recycling ...


    By Via Expo Ltd.

  • ASTM D7766 / D7766M - 11 Standard Practice for Damage Resistance Testing of Sandwich Constructions

    This practice provides supplemental instructions that allow Test Methods D6264/D6264M (for quasi-static indentation testing) and D7136/D7136M (for drop-weight impact testing) to determine damage resistance properties of sandwich constructions. Susceptibility to damage from concentrated ...


    By ASTM International

  • Astro Engineering and Manufacturing Increases Laser Cutting Capacity

    Astro Engineering and Manufacturing increases laser cutting capacity with purchase of a Mazak STX-510 2500 Watt Laser Cutter.  This machine is complete with a load/unload system and with the programming software Radan, it can operate unattended for high efficiency and cost savings.  This laser cuts up to ¾” Mild Steel, 3/8” Stainless Steel, and ...

  • Adhesive tape terminology 101

    How well do you understand the terminology that is used with Adhesive Tapes? Below we will define some of the more common terms that are used freely in the adhesive tape world. Don"t get stuck on terms you don"t understand. Adhesion- Is a bond that is produced between a pressure sensitive adhesive and a surface. Adhesive- Is any material that will hold two or more ...


    By Global Plastic Sheeting

  • Rössl & Duso launches its new line of shredders for Aluminium scrap

    Rössl & Duso S.p.a. has a long tradition on mechanical machining of large industrial parts in forged, cast or sheet steel, like turbine casings, naval shafts, rings, etc. for the power, oil/chemical, nuclear and naval industries. The works are carried out exclusively with CNC machines. The company was created in 1970 and is part of the medium-size manufacturing industries of the Veneto region ...


    By Rossl & Duso Group S.p.A

  • GM Landfill-Free Environmental Initiative Gains Steam

    General Motors' efforts to eliminate the shipment of plant waste to landfills is spreading to its non-manufacturing sites, 10 of which now reuse, recycle or convert to energy all waste from normal operations. "Our non-manufacturing facilities see the importance of being waste-reduction leaders, and they know their customers value it as well," said John Bradburn, manager of ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you