New video - Particulate & Velocity monitoring: choose the right solution
Choosing the best monitoring solution for your particulate and velocity monitoring application can be confusing. The video below, can help guide you to choose the right ENVEA particulate and velocity measurement technology for your application and needs.
Industrial plants that have flue gas emissions to air vary greatly depending on their process, their output and the abatement process. This results in a wide variety of stack sizes, flue gas compositions, post-filter conditions and a wide range of flue gas velocities. Knowing which ENVEA technology fits your plant conditions can be confusing but ENVEA is here to help you make the right technology choice based on key plant considerations such as approvals, explosive protection, temperature, pressure, moisture in the flue gas and many other variables.
Using the right particulate measurement technology, for example in a wet Flue Gas Desulphurisation (wet FGD) plant, is important. Plant operators must choose technologies that enable them to both controls their emissions to meet their Emission Limit Values (ELV) and measure particulate in wet flue gases. Operators in a cement plant need to monitor abatement bag house efficiency to capture data on flue gas particulate levels, bag leaks and bag failure to avoid mass emission events and to control costs, labour and downtime. Users of Electrostatic Precipitators (ESP) need a highly accurate particulate measurement technology that can measure charged flue gases. All these key considerations and many more are provided for in the ENVEA range of particulate and velocity sensor technologies.
Our new video helps to guide you to the right technology for your site by giving you an introduction to some of our key particulate and velocity technologies, giving you a more defined list of products to read more about in our Product Selector and product web pages.
- ENVEA - Model MP101M with OPM (Optical Particulate Monitor) - Automatic & Real-Time Particulate Monitor
- ENVEA - Model PM162M - Automatic Sequential Particulate Sampler
- ENVEA - Model PCME QAL 181 QAL1 - Forward Scatter Particulate CEM
- ENVEA - Model PCME LEAK LOCATE 660 Plus - Dust Emission Monitoring System
- ENVEA - Model PCME QAL 182 WS - Particulate CEM for Wet Gas Streams
- ENVEA - Model PCME Stackflow 200 - QAL1 Certified Averaging Pitot Flue Gas Flowmeter
- ENVEA - Model PCME Stackflow 400 - QAL 1 Certified Ultrasonic Flue Gas Flowmeter
- ENVEA - Model PCME QAL 991 - ElectroDynamic Approved Particulate CEM
Judson M. Freed, MA, CEM, Sworn in as IAEM-USA President
Judson (Judd) M. Freed, MA, CEM, has taken office as 2020-2021 president of the USA Council of the International Association of Emergency Managers (IAEM-USA). He was sworn in during the Closing Session of the IAEM Reimagined Virtual Conference. Other officers sworn in were IAEM-USA First Vice President Carolyn J. Harshman, MPA, CEM, IAEM-USA Second Vice President Cathy M. Clark, MA, and IAEM-USA Secretary Sarah L. Moore, CEM. Upon taking office, Mr. Freed expressed the importance of the profession of emergency...
ENVEA launches its NDIR-GFC multi-gas analyzer MIR 9000e
The multi-gas monitor meets the highest International and European standards, such as the EN 15267 and has been tested and certified in accordance with the "TUV Approved" Guidelines of the TÜV Rheinland Group. It can measure simultaneously and continuously up to 8 parameters, depending on your selection: NO, SO2, CO, CO2, CH4, N2O, O2 and residual H20) including greenhouse gases. The analyzer is adaptable to your actual and future requirements and can be upgraded from one single parameter to the full gas...
PCME QAL 181 achieves MCERTS Certification for New Range of 0 7.5mg/m³
ENVEA is pleased to announce their latest MCERTS certificate for the market-leading PCME QAL 181 Particulate Matter Continuous Emission Monitor (PM-CEM) to a newly certified range of 0 – 7.5 mg/m3 in accordance with EN 15267-3. This is currently the lowest certified range achievable for any PM-CEM and demonstrates the continuous evolution of the ENVEA Emissions portfolio. Link to the CSA Certificate This new addition complements the ENVEA forward scatter product portfolio, which includes...
International Association of Emergency Managers USA Council Announces Results of 2020 Officer and Board Elections
The International Association of Emergency Managers USA Council (IAEM-USA) is pleased to announce the results of its elections that ended on August 31. IAEM-USA members selected Cathy Clark, MA, as the incoming second vice president, and Sarah L. Moore, CEM, as incoming secretary. 508 total members voted this year, continuing a trend of increased IAEM voter activity. Cathy Clark, MA, deputy director, emergency communication networks, Minnesota Department of Public Safety, has served IAEM in numerous roles since...
IMR Inc. Worldwide
For more than 30 years IMR Inc. has been supplying effective and innovative solutions for a wide range of industrial uses through its design and manufacturing of combustion gas analyzers. IMR collaborates with companies across the globe in providing customized solutions tailored to their specific needs. IMR’s innovative culture and renowned reliability allow for revolutionary results for their customers. IMR’s passion for design led to the creation of portable measuring analyzers which are now being...