Energy & Renewables Product Alerts
|
|
Energy & Renewables Product Alerts |
  |
|---|
| ›› New and recently updated products & services |
|---|
 |
HOFGAS® - CFM4c - Mine Gas Flare
By Hofstetter Umwelttechnik AG The HOFGAS® - CFM4c high temperature flare provides safe and environmentally-friendly combustion of coal mine gas. The exhaust gas emissions meet the stringent requirements with destruction efficiency > 99.95% in relation to methane gas. This is achieved with combustion temperatures between 1’000 - 1’200°C and a defined residence time of > 0.3s. Depend on technology in underground coal mining methane gas with specific concentration range has to be extracted and flared. ... ›› Request More Information ›› Download Brochure | ||
 |
Landfill Gas Flares
By AirScience Technologies Inc. Wet process gas enters a coalescing pre-filter, then passes through the inlet valve assembly and is directed towards chamber 1 where the clean gas passes upward through the desiccant. Gas drying is doneby adsorption. Dry gas from chamber 1 outlet passes through the valve assembly and through the after-filter to the dry gas receiver tank. While gas is being dried in chamber 1, the desiccant in chamber 2 which has been humidified in the previous cycle, is being simultaneously ... ›› Request More Information ›› Download Brochure | ||
| |||
 |
Recuperative Thermal Oxidisers
By Process Combustion Ltd Process Combustion Ltd.’s range of recuperative oxidisers can be designed with a very high destruction efficiency capability combined with integral heat recovery systems to help reduce operational cost. Systems are supplied with a primary heat exchanger to heat the incoming air stream. Additional secondary heat recovery systems can be installed to heat hot oil, water or air required for dryers, ovens or space heating. ›› Request More Information ›› Download Brochure | ||
 |
Combustion Systems
By Nacah Tech LLC Contact Nacah Tech for your specific combustion needs. We utilize the industry leaders in burners, valves, and components to assure you of a high quality system. Our designs are focused on cost savings from excellent fuel economy and proper handling of the incoming and outgoing processes. ›› Request More Information ›› Download Brochure | ||
 |
TNV Thermal Recuperative Oxidisers
By KBA-AirSystems This process is suitable for use in the presence of constantly high hydrocarbon amounts, were there is a high waste heat requirement. By employing effective heat recovery systems, TNV systems are still the most economic process for many applications. ›› Request More Information ›› Download Brochure | ||
-150.jpg) |
High Temperature Flare (HTF)
By ABUTEC LLC High Quality, Flexibility, Low Emissions, BACT Compliant, CSA Approved, and able to burn very low calorific gas all describe ABUTEC’s High Temperature Flare. Proven in all applications and more cost competitive than traditional enclosed flares or vapor combustors. We save you money while meeting all regulations! ›› Request More Information ›› Download Brochure | ||
 |
Internal Fuel Handling
By BMH Enviro The fuel handling systems internal to boiler house include buffer bins with reclaimers and boiler-specified fuel infeed equipment to meet the challenges of advanced boiler technology. Special attention has been paid to making the fuel flow to the boiler as even and homogeneous as possible to contribute to undisturbed operation of the burning process. ›› Request More Information | ||
 |
GasMix
By Landia Innovative mixing system for anaerobic digesters. Unique method to combine sludge recirculation with gas injection. ›› Request More Information ›› Download Brochure | ||
 |
KAHL Wood Pelleting Plants
By Amandus Kahl GmbH & Co. KG KAHL WOOD PELLETING - A high quality awareness establishes KAHL on the wood pellet market. For more than 30 years Kahl has dealt with this product and can offer a sophisticated process for the production of high-quality pellets with very good combustibility, now. ›› Request More Information | ||
 |
Wood Pelleting Pellet Mill
By Van Aarsen International Van Aarsen manufactures four types of pellet mills: C500, C600, C750 and C900 depending on the required pellet quality and capacity. Distinguishing features of the Van Aarsen Compact pellet mills are the high capacity and the excellent pellet quality. A large effective die area and an optimal peripheral velocity of the dies achieve this. The velocity can be selected in accordance with the product to be processed. ›› Request More Information ›› Download Brochure | ||
|
Advertise in this Newsletter For information on advertising in this newsletter, contact us or call USA 1-888-244-5029 / Europe +34 91 395 2971. © 2010 Environmental Expert S.L. |
