Chemical Treatment Equipment
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Chemical oxidation processes use (chemical) oxidants to reduce COD/BOD levels, and to remove both organic and oxidisable inorganic components. The processes can completely oxidise organic materials to carbon dioxide and water, although it is often not necessary to operate the processes to this level of ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Scale is the precipitate that forms on surfaces in contact with water as a result of the precipitation of normally soluble solids that become insoluble as temperature increases. Some examples of scale are calcium carbonate, calcium sulphate, and calcium silicate. Scale inhibitors are surface-active negatively charged polymers. As minerals exceed their solubility's and begin to merge, the polymers ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Municipal water is often pH-adjusted, in order to prevent corrosion from pipes and to prevent dissolution of lead into water supplies. During water treatment pH adjustments may also be required. The pH is brought up or down through addition of basics or acids. An example of lowering the pH is the addition of hydrogen chloride, in case of a ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
To promote the formation of flocs in water that contains suspended solids polymer flocculants (polyelectrolytes) are applied to promote bonds formation between particles. These polymers have a very specific effect, dependent upon their charges, their molar weight and their molecular degree of ramification. The polymers are water-soluble and their molar weight varies between 105 and 106 g/ mol. ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Disinfectants kill present unwanted microrganisms in water. There are various different types of disinfectants: Chlorine (dose 2-10 mg/L), Chlorine dioxide, Ozone, ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Ion exchange resins need to be regenerated after application, after that, they can be reused. But every time the ion exchangers are used serious fouling takes place. The contaminants that enter the resins will not be removed through regeneration; therefore resins need cleaning with certain chemicals. Chemicals that are used are for instance ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Algaecides are chemicals that kill algae and blue or green algae, when they are added to water. Examples are copper sulphate, iron salts, rosin amine salts and benzalkonium chloride. Algaecides are effective against algae, but are not very usable for algal blooms for environmental reasons. The problem with most algaecides is that they kill ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
When referring to coagulants, positive ions with high valence are preferred. Generally aluminium and iron are applied, aluminium as Al2(SO4)3- (aluin) and iron as either FeCl3 or Fe2(SO4)3-. One can also apply the relatively cheap form FeSO4, on condition that it will be oxidised to Fe3+ during aeration. Coagulation is very dependent on the doses of coagulants, the pH and colloid concentrations. ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Corrosion is a general term that indicates the conversion of a metal into a soluble compound. Corrosion can lead to failure of critical parts of boiler systems, deposition of corrosion products in critical heat exchange areas, and overall efficiency loss. That is why corrosion inhibitors are often applied. Inhibitors are chemicals that ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Oxygen scavenging means preventing oxygen from introducing oxidation reactions. Most of the naturally occurring organics have a slightly negative charge. Due to that they can absorb oxygen molecules, because these carry a slightly positive charge, to prevent oxidation reactions from taking place in water and other liquids. Oxygen scavengers include both volatile products, such as hydrazine (N2H4) ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Foam is a mass of bubbles created when certain types of gas are dispersed into a liquid. Strong films of liquid than surround the bubbles, forming large volumes of non-productive foam. The cause of foam is a complicated study in physical chemistry, but we already know that its existence presents serious problems in both the operation of industrial processes and the quality of finished products. ...
-
PremiumManufactured by Jenfitch INC.based in USA
Jenfitch can provide you a variety of flocculent: dry flocculent and liquid emulsion. These chemicals are very effective in increasing the particle size and water release from the particle. It is a low cost method and simple to use. Jenfitch can provide a simple and effective chemical program to improve clarity, settling and ...
-
ShowcaseManufactured by Jenfitch INC.based in USA
Jenfitch offers a wide variety of coagulants and flocculants for your water treatment needs. We have developed customized coagulants and flocculants to achieve optimum clarity and fast settling in your clarifiers. Our flocculent are effective in increasing particle density and enhancing water release during the dewater phase. Jenfitch can ...
-
based in USA
TurnKey offers chemical treatment systems for the removal of metals, solids, oils, pH adjustment and more. We offer the treatablility test, system design and can supply the ...
-
based in USA
metal-contaminated wastes is attributable to Sevenson's patented MAECTITE chemical treatment process. Metals and compounds that are successfully rendered non-hazardous by RCRA definition with the MAECTITE technology include, lead, cadmium, arsenic, chromium, selenium, and barium. Additional target species are copper, nickel, zinc, cyanide, and ...
-
Manufactured by HydroTech Engineering Co Ltdbased in UKRAINE
Stabilization treatment of cooling water. Its purpose is to prevent biogrowth, corrosion and scale formation in the cooling equipment during the cooling system operation. Inhibitors are used for the prevention of scale and corrosion formation. They minimize these processes at low concentrations. In order to create ideal chemical ...
-
Manufactured by Water Maze - a brand by Kärcher North Americabased in USA
The Water Maze CoAg2-20A System is an advanced chemical treatment system, using the method of adding a chemical coagulant and polymer to the treatment process, to efficiently remove suspended solids and emulsified oils from the waste stream. The new Water Maze CoAg2-20A System is a very low maintenance, cost effective system to ...
-
Manufactured by MER-MADE FILTER, INC.based in USA
Specifically designed for commercial pools and spas. PoolLink® 100 Series automates control of pH and ORP/ ppm levels. A specialized microcomputer is at the heart of every PoolLink®. This technology allows the controller to perform complex and exceptionally accurate control functions with the added benefit of versatility, easy set-up, and operation. PoolLink® 100 series is reliable ...
-
Manufactured by BERG Chilling Systems Inc.based in CANADA
Specifically chosen for your conditions, these chemical treatment units automatically control the release of agents into your water to control scale, suspended solids, and microbiological growth in your system. Compact and flexible for your cooling tower and chilled water ...
-
Manufactured by ATS Innova Clean Water Solutionsbased in USA
PermaTote Improves Your Chemical Experience: Never unexpectedly run out of chemistry again. Reduce the risk of hazardous and costly chemical spills. Stackable totes use less floor space. Sturdy construction assures durability throughout the years. Quick connect feature allow for fast tote replacement. Tilt option provides complete ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you