Only show results available in Virginia? Ok

District Heating Piping equipment

  • PIPE-INSPECTOR - Cable-less TV-Inspection of Pipelines with Integrated Leak Detection

    For potable water, waste water, oil, gas and district heating pipeline systems. High daily output. Environment-friendly. Low staff expenses. No pre-cleaning. Suitable for potable water.

    By MTA Messtechnik GmbH based in Veit an der Glan, AUSTRIA. from Potable Water Products Product line

  • District Cooling Systems

    District cooling systems produce chilled water, steam or hot water at a central plant and then pipe that energy out (either underground or over rooftops) to buildings for air conditioning, space heating and water heating. As a result, these buildings don't require their own chillers, air conditioners, boilers or furnaces.

    By Stellar Energy based in Jacksonville, FLORIDA (USA). from Other Products Product line

  • CPV - Hiline Pre-insulated Steel Pipe

    A pre-insulated rigid steel pipe system for district heating, cooling and special applications. A rigid, bonded pre-insulated steel pipe system in accordance with EN253. Suitable for district heating, cooling and special applications and temperatures up to 130°C continuous. Available in metric and imperial sizes – from 20mm to 1200mm NB, ...

    By CPV Ltd based in Romsey, UNITED KINGDOM. from Pre-insulated Pipe Product line

  • Hiline Aqua - Rigid Pre-Insulated Polymer Pipe System

    A pre-insulated pipe system for district heating, cooling and potable water applications. Hiline Aqua is a rigid, pre-insulated polymer pipe system specifically developed for the next generation of district heating, cooling and hot water service networks. Whether it’s for a simple connection between two buildings or a large-scale network, it ...

    By CPV Ltd based in Romsey, UNITED KINGDOM. from Pre-insulated Pipe Product line

  • Eigerflex - Flexible Pipe Systems

    EIGERFLEX is the flexible system, with or without a self-regulating frost protection strip, for cold water and waste water pipes. Operating temperature max. -20 °C up to +20 °C, operating pressure up to 16 bar.

    By Brugg Rohrsystem AG based in Kleindöttingen, SWITZERLAND. from Flexible Pipe Systems Product line

  • iso-technik - Pipes System

    As far as the design, the Iso-technik system has a structure similar to the traditional solutions used in district heating networks: a service pipe through which the vector fluid flows with a maximum operating temperature of 90°C, surrounded by an insulating layer of polyurethane foam, all enclosed by an outer protective sheath made of high ...

    By aquatechnik s.p.a. based in Magnago (MI), ITALY. from Fusio Technik Product line

  • BEULCO - Model Series 66 - Brass - Fittings for Plastic Pipes

    The flexible all-rounder - for water, gas and district heating. With our A1 product group you can rely on having the right connectors for water, gas and especially district heating. The convenient system covers a range of diameters from 16 to 110 mm. It comprises just three elements and features a rough male thread. This ensures swift and ...

    By BEULCO GmbH & Co. KG based in Attendorn, GERMANY. from Trading Programme Product line

  • Flexwell - Pre-insulated Pipes

    Flexible, endless production, double-walled, monitorable and self-compensating pipe system, -170°C to +150°C, PN 25, DN 25-150. Medium pipe: special steel, heat insulation: PUR.

    By Pipe 2000 Ltd. based in Benfleet, UNITED KINGDOM.

  • Logstor - European Piping Systems

    Headquartered in Denmark, Logstor is the world’s pre-eminent producer of pre-insulated pipe systems employing over 1400 people in 9 production facilities.  Logstor is credited with having invented pre-insulated pipe technology and have supplied more than 160,000 km (99,500 miles) of pipe with over 40 years experience in fine ...

    By Urecon Ltd. based in St. Lazare-de-Vaudreuil, QUEBEC (CANADA). from Other Product line

  • Premium

    Sierra InnovaSonic - Model 207i - Ultrasonic Liquid Flow Meter

    High accuracy transit-time ultrasonic technology. Software apps for ease of installation & diagnostics. Optimized for thermal energy/BTU measurement. Clamp-on sensors, no pipe cutting, no shutdown. Real-time liquid density compensation. Upgrade meter firmware and software in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA). from Ultrasonic Flow Meters Product line

  • KLINGER Monolith - Model KHO - Ball Valves

    The body of the KLINGER KHO Monolith ball valve was stress-optimised by Klinger Fluid Control in cooperation with the Technical University of Vienna to resist highest tensile and pressure forces occuring in underground laid pipe-networks. The whole construction was done and optimised by using FEM-calculations. ...

    By Klinger Fluid Control GmbH based in Gumpoldskirchen, AUSTRIA. from Fully Welded Ball Valves Product line

  • JSC - Straw Shredding and Pellet Producing Equipment

    Straw shredding and pellet producing equipment SSGL-1 purpose – to shred various types of straw and produce pellets for automate large boiler-rooms, combined heat and power (CHP) for the heat supply districts and individual consumer’s trade, also for animal bedding. It is very important to have high-quality, dry, clean material for ...

    By JSC Radviliskis Machine Factory based in Radviliskis, LITHUANIA. from Pellet Presses Product line

  • HERZ BioFire - Model 500-1500 - Log Wood Boiler

    The HERZ BioFire 500/600/800/1000/1500 is the answer for large properties. Innovative heating with the unbeatable compact BioFire for wood chips or pellets!

    By Herz Energietechnik based in Pinkafeld, AUSTRIA. from Boiler for Log Wood Product line

  • Advance Thermal - Model SLIM - Manhole and Tunnel Covers

    Jackets do not retain water. Comprised of an insulation core of a new revolutionary nano-technology Aerogel type material, this patented product is unaffected by water, super light, ultra-thin, with built-in drains and anti-mold vents. Among the most demanding applications for removable/reusable insulation covers, the steam distribution and ...

    By Advance Thermal Corp. based in Wood Dale, ILLINOIS (USA).

  • Tunnel System

    The renewal of sewers in closely built-up city areas can often be very difficult due to limited space, traffic and a large number of existing supply lines. In these situations the TAUBER Tunnel System with tubing’s of concrete or polycrete proves to be very worthwhile. The tubing are pipe segments of concrete, grade B 45 (DIN 1045), in a ...

    By Tauber Rohrbau GmbH & Co. KG based in Münster, GERMANY.

  • FALCO - Model 300 - Catalytic Oxidizer

    The FALCO 300 electric catalytic oxidizer treats air streams contaminated with volatile organic compounds. The catalyst provides VOC destruction efficiencies up to 99.5%. Operation, including startup, is fully automatic. Control system accurately regulates input loading and temperatures. The controls adjust a FALCO Vapor Control Valve (VCV) to

    By Falmouth Products Inc. based in East Falmouth, MASSACHUSETTS (USA). from Remediation Product line

  • Model BSRIA BG29/12 - Pre Commissioning Cleaning of New Pipework Systems

    New commercial Heating/Cooling/Condenser pipe work systems are installed within British Standard specifications and comply to design criteria, this is crucial to ensure that they operate within their design parameters and operate efficiently. New systems lean towards “green energy” and higher efficiency systems due to the UKs ...

    By 4i Water Services Ltd based in Suffolk, UNITED KINGDOM.

  • Multiplexx - Model PVCP - Liners

    More effective in resisting corrosion than competing trenchless lining solutions. Proven superior in acid resistance to other technologies in tests conducted by the Sanitation District of Los Angeles County, MultiplexxTM PVCP Liners from Terre Hill Composites add years of utility to aging sewer structures while saving you tens of thousands of ...

    By Terre Hill Composites, Inc. (THC) based in Ephrata, PENNSYLVANIA (USA).

  • PSI - Compakt Seal

    The PSI Compakt seal is the perfect complement to the original Link-Seal seal. Ideal sealing for wall penetrations for gas, water and sewage pipes as well as for cables against pressing and non-pressing water. Pressure plates are always made of stainless steel.

    By PSI Products GmbH based in Mössingen, GERMANY. from Sealing Technology Product line

  • Model K45 - Conveyor Belt

    The system can be used directly in conjunction with a Bredal spreader with hydraulic driven. The sand conveyor can be removed and the spreader unit can be mounted for spreading lime, fertilizer or for the installation of sand/salt equipment.

    By Bredal A/S based in Vejle Øst, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you