Acme Engineering Prod. Ltd.

- Model Y Type - Strainers



Most cost effective, Y strainer uses perforated wire-mesh or wedge wire to trap unwanted solids from a process stream. Y strainer can be mounted vertically or horizontally in a piping system strainer are low cost solution to large nominal bore straining requirements. Y strainer are commonly used in pipelines to prevent damage of Gauges, pumps, control valves, Flow meters and other process equipment. Fabricated Y strainers from 2” to 48” (larger sizes are available). Designed in accordance with ASME Section VIII Div. I Standard design pressures include 150psi, 300psi till 15000 psi (Higher pressure available on request). Strainers available in CS,CSRL,SS304,SS316,Duplex,Super Duplex. Hinged covers & Swing bolt opening available for quick opening.

  • Process Industry
  • Power Industry
  • Chemical Industry
  • Oil and Gas
  • Metals and Mining
  • Water and Waste
  • Pulp and Paper

  • Low pressure drop streamlined design
  • Large strainer screens
  • Compact end to end dimension
  • Fabricated Construction

  • Ductile Iron
  • Bronze
  • Carbon Steel
  • Low Temp Steel
  • Chrome Molly
  • Stainless Steel
  • Other Materials Upon Request

  • Flat Faced
  • Raised Face
  • RTJ Flanged
  • Buttweld
  • Threaded (N PT)
  • Socketweld Sweat

  • Fabricated – Custom sizes to meet any requirements

  • Steam, liquid, gas and oil service
  • Power industry
  • Pulp and paper
  • Chemical industry
  • Process Equipment
  • Metal & Mining
  • Water & Waste

Custom engineered and fabricated Y strainers

NPT, RF or RTJ, Socketweld and Buttweld

connections designed in accordance with ASME B16.34 and B16.5

Standard thru bolt or grooved cover design. Installation in horizontal or vertical pipelines. Stainless steel perforated screens are standard Drain/Blow-off connection furnished with plug

  • FY-1 : Standard
  • FY-Z : Custom Configuration
  • Other materials, sizes and/or configurations
  • Quick Opening covers — See Page
  • Other screen, mesh or wedgewire — See Page
  • Vent and/or differential pressure connections
  • “U” stamped vessels
  • NACE MR010-75 Certification
  • External/Internal coatings
  • 600# flange rating and higher
  • Gooved end connections
  • Oxygen cleaning
  • Contact Factory for other Options

Y Strainer shall be designed and manufactured to meet ASME B31.1, ASME B31.3 or ASME B31.4 and/or ASME Section VIII Div. 1. The Strainer body shall be fabricated steel or other specified material. The screen shall be size perf Stainless Steel. The strainer shall have a bolted cover furnished with a drain connection and plug as standard. The strainer shall be have an inlet size of and Open Area Ratio of____. The Y Strainer shall be ACME FY___Series.

  • Shell & Nozzles : SA53S/B / A106-B
  • Flanges : SA105
  • Coupling/threadolets : SA105
  • Plug : SA105
  • Screen Retainer Ring : A36
  • Screen1 : 304 SS
  • Gasket1 : 04 SS Spiral Wound
  • Stud : SA193-B7
  • Nut : SA194-2 H

Customer reviews

No reviews were found for ACME - Model Y Type - Strainers. Be the first to review!