Advanced Energy

- Model IMPAC IS 6, IGA 6, and IGA 6/23 - Advanced Stationary, Digital Pyrometers for Non-Contact Temperature Measurement, 50 to 3000ºC

From

0

Advanced Energy’s Impac IS 6, IGA 6, and IGA 6/23 Advanced are digital and compact pyrometers for non-contact temperature measurement of metals, ceramics, or graphite. High-end optics with manual focus. Unmatched accuracy and repeatability. Wide temperature ranges and flexible process adaptation. Fast response times. Four-digit LED display.

The digital Impac® IS 6, IGA 6, and IGA 6/23 Advanced are fast infrared measuring instruments. The pyrometers are ideal for non-contact temperature measurement on metals, ceramics, or graphite. The series feature integrated four-digit LED displays that indicate current measuring temperatures or set measuring distances. The pyrometers can also be can be equipped with a laser-target light, viewfinder, or TV camera module.

The IS 6, IGA 6, and IGA 6/23 can be connected to a PC through an RS485 to USB connection, enabling you to make parameter adjustments using the InfraWin software. The software can be used for temperature indication, data logging, and further analyzing of complete temperature processes.

  • Use in harsh environments thanks to a robust, stainless steel sensor (IP65/NEMA4)
  • Easily measure fast and dynamic processes
  • Connect to your PC via an RS485 to USB connection
  • Select a laser target light, viewfinder, or TV camera module

  • Complete digital core for sub-ranging and adopted analog output
  • Fast response times
    • IS 6 and IGA 6 Advanced: 120 μs
    • IGA 6/23 Advanced: 0.5 ms
  • High-end optics with manual focus capability
  • Four-digit LED display

Temperature Ranges

IS 6

  • 600 to 1800°C (MB 18)
  • 600 to 3000°C (MB 30)

IGA 6

  • 250 to 1800°C (MB 18)
  • 250 to 2500°C (MB 25)

IGA 6/23

  • 50 to 1000°C (MB 10)
  • 75 to 1300°C (MB 13)
  • 150 to 1800°C (MB 18)

Any range adjustable within the temperature range, minimum span 50°C

Measurement

Spectral Ranges

  • IS 6: 0.7 to 1.1 µm
  • IGA 6: 1.45 to 1.8 µm
  • IGA 6/23: 2 to 2.6 µm (main wavelength 2.3 µm)

Measurement Uncertainty
See IS 6 / IGA 6 data sheet or IGA 6/23 data sheet

Repeatability

  • IS 6 and IGA 6: > 300°C: 0.15% of reading in °C +1°C
  • IGA 6/23: 0.15% of reading in °C + 1 °C

Exposure Time t90

  • IS 6 / IGA 6: 120 µs
  • IGA 6 / 23: 0.5 ms
  • For IGA 6 Advanced, it is recommended for measuring temperatures below 300°C to set a response time of 1 ms (min)
  • Adjustable to min, 1 ms, 3 ms, 5 ms, 10 ms, 50 ms, 250 ms, 1 s, 3 s, 10 s

Emissivity ε
0.050 to 1.000 in steps of 1/1000

Transmittance τ
0.050 to 1.000 in steps of 1/1000

Optical

Sighting
Built-in laser aiming light (maximum power level < 1 mW, λ = 630 to 680 nm, CDRH class II) or through lens sighting

Optics
Manually focusable from rear cover measuring distance a = 210 to 5000 mm

Distance Ratio

  • IS 6 / IGA 6: Approximately 350:1
  • IGA 6/23: Approximately 50:1 (MB 10), 100:1 (MB 13), 350:1 (MB 18)

Interface and Communication

Connection
12-pin connector

Display
In Rear Cover: LED, four-digit matrix, 5 mm high temperature signal or measuring distance

Parameters

Adjustable via interface: emissivity, subrange, ambient temperature compensation, settings for maximum value storage, address, baud rate, transmittance, response time t90, 0 to 20 mA or 4 to 20 mA analog output range, °C / °F
Readable via Interface: measured value, internal temperature of the unit, measuring distance

Analog Output
Adjustable 0 to 20 mA or 4 to 20 mA, linear (via digital interface)

Digital Interface

  • RS485 addressable (half-duplex)
  • Baud Rate: 1200 Bd to 115.2 kBd or RS232

Environmental

Protection Class
IP 65 IEC 60529 (value in mated condition)

Operating Position
Any

Ambient Temperature
0 to 70°C (32 to 158°F) at housing

Storage Temperature
-20 to 80°C (-4 to 176°F)

Relative Humidity
Non-condensing conditions

Weight
0.6 kg (1.32 lb)

Housing
Stainless steel

CE Label
According to EU directives about electromagnetic immunity

Electrical

Power Supply
24 VDC ±25%, ripple must be less than 50 mV

Power Consumption
Maximum 3 W (including laser)

Load
0 to 500 Ω

Isolation
Power supply, analog output, and digital interface are galvanically isolated from each other

Typical Applications

  • Induction processes (e.g. hardening, welding, brazing, soldering, etc.)
  • Preheating
  • Tempering
  • Heating and cooling processes
  • Melting
  • Annealing
  • Rolling
  • Forging
  • Sintering

Customer reviews

No reviews were found for Advanced Energy - Model IMPAC IS 6, IGA 6, and IGA 6/23 - Advanced Stationary, Digital Pyrometers for Non-Contact Temperature Measurement, 50 to 3000ºC. Be the first to review!