Salamandra Safety

- Model AGS-7/1 - Aerosol Fire Extinguisher AGS-7/1

AGS-7 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration. Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Due to injector which is installed on the generator, the aerosol is actively mixed with air, which significantly reduces the temperature of aerosol stream. It is manufactured in two modifications with protected volumes up to 64 m3 and up to 134 m3. Modifications also differ by dimensions and weight. The electrical impulse which comes to the starter* which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle. This generator is recommended for use as part of fire extinguishing systems in the premises of medium and large volumes.

Technical characteristics

Fire classes

Fire Class A Fire Class B

Aerosol generating cartridge weight

3,4 kg

Protected volume

63 m3

Net weight

5,8 kg

Diameter ? Height

167 mm x 355 mm

Operating Time

86 +/- 13 sec


VR-7.5, VRTH


Starter Impedance

7,5 Ohm

2,5 – 4 Ohm

Minimum starter current


0,4 ?

Starting Voltage

8 – 30 V

1,5 – 24 V

Starting Impulse Duration

Not less than 1.5 sec

Not less than 0.1 sec

Generator Start-up Delay

< 1.5 sec

Operating Conditions

-50° C / + 50° C, humidity up to 98%, mechanical influence 0.5 g at frequency range up to 35 Hz

* The starter type is chosen by the Buyer

Customer reviews

No reviews were found for Salamandra Safety - Model AGS-7/1 - Aerosol Fire Extinguisher AGS-7/1. Be the first to review!