Salamandra Safety

- Model AGS-8/1 - Aerosol Fire Extinguisher AGS-8/1

AGS-8 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration. Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. In fact this generator in the analogue of AGS-7 but due to the labyrinth construction, the temperature of the outgoing aerosol stream is reduced significantly. It is manufactured in two modifications with protected volumes up to 60 m3 and up to 124 m3. Modifications also differ by dimensions and weight. The electrical impulse which comes to the starter * which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle. This generator is recommended for use as part of fire extinguishing systems in the premises of medium and large volumes.

Technical characteristics

Fire classes

Fire Class A Fire Class B

Aerosol generating cartridge weight

3,25 kg

Protected volume

60 m3

Net weight

10.0 kg

Diameter - Height

220 mm x 220 mm

Time of operating

78 +/- 11 sec


VR-7.5, VRTH


Starter impedance

7.5 Ohm

2.5-4 Ohm

Starter minimum current


0,4 ?

Starting voltage

8 – 30 V

1,5 – 24 V

Duration of the starting impulse

Not less than 1.5 sec

Not less than 0.1 sec

Delay of generator start up

< 1.5 sec

Operating conditions

-50° C / + 50° C, humidity up to 98%, mechanical influence 0.5 g at frequency range up to 35 Hz

* The starter type is chosen by the Buyer

Customer reviews

No reviews were found for Salamandra Safety - Model AGS-8/1 - Aerosol Fire Extinguisher AGS-8/1. Be the first to review!