Agar - Model ID 200 - Interface Concentration Detector System
From Interface Detectors
The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam. A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.
-
Most popular related searches
Systems
- ID-201 (½ Inch Shaft)
- ID-202 (1 ¼ Inch Shaft)
- ID-205 (Cable Mounted)
Operating Range
- Emulsion Concentration: 0-100% Hydrocarbon/ Water by Volume
- Process Temperature: Standard: 32°F to 300°F (0°C to 149°C)
- High-Temp: 32°F to 450°F (0°C to 232°C)
- Ambient Temperature: -40°F to 131°F
- Pressure Rating: Up to 3000 PSI
Optional Process Connection
- SH-2'/SS: 2' NPT Seal Housing, 316 Stainless Steel
- SH-2'/SS: 2' NPT Seal Housing, Carbon Steel
- CF-¼'/SS: ¼' NPT Compression Fitting, 316 Stainless Steel
- CF-¼'/CS: ¼' NPT Compression Fitting, Carbon Steel
- Flange Connections: ANSI 150# to 1500#
Model Variations
- ID-201: ½' shaft; Standard: 48' (4 Ft.); Minimum: 12' (1 Ft.); Maximum: 120' (10 Ft.)
- ID-202: For probe lengths greater than 10 feet, sturdier 1 ¼' shaft assemblies from 5 foot sections via threaded connections.
- ID-205: Shaft replaced by cable for suspension of antenna down through the top of the tanks, wells, platform legs, caverns, etc.
Electrical Rating
- ID-201, ID-202, ID-205 Probe: Intrinsically Safe: Class 1, Div.1, Groups C & D, T3C
- ATEX: II 1G EEx ia IIB T4 (-40ºC<Ta<+70ºC)
- II 1G EEx ia IIC T5 (-40ºC<+65ºc)< td=''> <+65ºc)<>
- Power Required: 115/240 VAC 50-60 Hz or 12/24 VDC (±20%)
- Normal Power Consumption 3 Watts
- Maximum Power Consumption of 250 Watts (including lights)
- PS-201 Enclosures: Weatherproof (N4X) NEMA 4X
- Explosion Proof (N4/7) NEMA 4/7 Class 1, Div. 1, Groups C&D
- Wiring Connections: Flame-Proof (N4/7) NEMA 4/7 ATEX: II 2G Ex d[ia] IIB T6 (-20ºC<Ta<+55ºC)
- Barrier Terminal Block #18 AWG Maximum Diameter
Standard Output Options
- ID-201/420: Powered 4-20 mA into 400 Ohms Maximum; 4 mA = Oil, or Lowest Water Content
- ID-201/RL: Relay Contact 1A; 115V; NO and NC; (SPDT); Fail Safe On Water or Oil
- Adjustable Trip Point
- ID-201/RL/420: Relay and 4-20mA Options
- ID-201/RL/LI: Relay with Local Indicating Lights; Amber = Oil, Blue = Water
Customer reviews
No reviews were found for Agar - Model ID 200 - Interface Concentration Detector System. Be the first to review!