AMEX GmbH

- Model MONO-seal - Sealing Systems

0

The AMEX-10 MONO seal is made of an elastic rubber seal and high-strength stainless steel tension bands in the respective steel quality (1.4404/1.4571 for sewage, 1.4307 for potable water, 1.4462 for sea water). The sealing function is manually realised by application of radial tension forces via the tension belts.

The AMEX®-10 MONO seal can be used for DN of 600 up to 6000 to seal pipe connections and leaks for pipe material of steel, cast iron, steel-concrete, in-situ concrete, PVC, AZ, GRP, clay, PP and PE

Generally, the AMEX-10 MONO seal is designed for an operating inner pressure of 25 bar and an outer pressure of 8 bar. In case of groundwater (infiltration) or vacuum, the use of additional structural tension bands can permit safe use of the AMEX-10 MONO seal. 

  • Circular profile
  • mouth profile
  • ellipse profile

  • Standard seal width: 260 mm
  • Average width: 366 mm
  • Extrabreite: 500 mm
  • Average width: 366 mm
  • Variable width: 260 to 1.200 mm
  • Width of the bilateral sealing profiles: 69 mm each
  • The height of the sealing lip is 12 mm
  • On demand, the seal can be re-enforced with textile yarns

  • Temperature-resilience depending on the sealing material used, standard material: -10°C to +80°C, special material: up to 140°C
  • Rubber seal of EPDM (ethylene propylene diene monomer) for application with potable water, raw water, industrial water, municipal and industrial sewage
  • Seal of NBR (nitrile butadiene rubber) for application in gas and oils

  • Potable water approval KTW, DVGW W 270, NSF, ACS, DWI, WRAS
  • Building-authority approval of the DIBT: Z-42.3-474
  • High-pressure flushing resilience and pressure resilience of the seal
  • Tightness test of the pipe connections (offset, angulation)

Customer reviews

No reviews were found for AMEX-10 - Model MONO-seal - Sealing Systems. Be the first to review!