Only show results available in Virginia? Ok

Environmental industry Equipment with Thermoplastic piping for municipal applications

  • IPEX GoldStripe - Service Line Polyethylene Tubing

    You can see the difference. Gold Stripe service line polyethylene tubing from IPEX features a permanent gold stripe identification system and sequential numbering. This coloured stripe is actually part of the pipe wall – so it permanently identifies an IPEX manufactured pipe. Unlike copper and steel, Gold Stripe is noncorroding and resists ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Water Service Product line

  • IPEX - Model HDPE - High Density Polyethylene

    1/2' - 8' (12mm - 200mm). HDPE piping is commonly used for potable water pipe systems but can also be used for other applications including slurry lines, gas gathering and transmission lines and various other applications. High Density Polyethylene (HDPE) combines a number of desirable characteristics within a single material: flexibility, ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX - Centurion Larger Diameters of Pipe & New Applications

    14' - 48' (350mm - 1200mm). IPEX Centurion extends the corrosion-free benefits of Blue Brute to larger diameters of pipe and new applications. The versatility and ease of installation of IPEX Centurion is unmatched – shop drawings are eliminated and costly and difficult to install corrosion protection can be eliminated. In addition, unlike ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX - Model Blue 904 - Lightweight and Flexible PEX Water Service Tubing

    As copper prices continue to rise, cities across North America are turning to cost effective alternatives for their water service lines that connect municipal watermains to buildings. Blue904 is fully certified, lightweight and flexible PEX water service tubing. Installation friendly, Blue904 will resist corrosion, maximizing water flow over the ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Water Service Product line

  • IPEX Q-Line - Unique Composite For Water Service Tubing

    Introducing Q-Line – a unique composite, water service tubing that combines the advantages of both metal and plastic, while eliminating their drawbacks. Now available from IPEX, the world’s leading technical innovator in thermoplastic piping systems. Manufactured by IPEX to AWWA C903-02, Q-Line is the only water service tubing in North ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Water Service Product line

  • IPEX Philmac - Sewer Valves and Fittings

    Gone are the days of juggling and assembling loose fitting components on the job site or even having to turn off the water line when connecting a new line. Thanks to Philmac’s unique Slide & Tighten technology, you can get a perfect seal with Philmac 3G fittings in any condition by hand or with a wrench.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Water Service Product line

  • IPEX Tempest - Inlet Control Devices

    TEMPEST ICD's are designed to allow a specified flow volume out of a catchbasin at a specified head. This causes the excess stormwater to be temporarily stored above ground. This approach conserves pipe capacity so that catchbasins upstream do not become uncontrollably surcharged, which could lead to flooding. TEMPEST ICD’s incorporate ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Specialty Products Product line

  • IPEX LifeSaver - Manhole & Catch Basin Adjustment Systems

    Lifesaver Adjustment Systems are high impact HDPE adjustment units designed to bring manhole and catchbasin castings up to the exact height of the asphalt or concrete surface of a roadway. These units cushion the impact loads between the cast iron casting and the concrete manhole or catchbasin structure, while eliminating infiltration and ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Specialty Products Product line

  • IPEX - Model VFI - Vortex Flow Insert

    The IPEX Vortex Flow Insert (VFI) is a revolutionary technology for eliminating odorous emissions and minimizing corrosion in vertical sewer drops. With no moving parts and requiring virtually no maintenance, VFIs have delivered significant cost savings in installations across North America.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Specialty Products Product line

  • IPEX TerraBrute - Model CR - Engineered For Horizontal Directional Drilling (HDD)

    4' - 12' (100mm - 300mm). Engineered for Horizontal Directional Drilling (HDD) and other trenchless applications, TerraBrute CR is a 100% non-metallic, AWWA C900 PVC pressure pipe system. Non-corroding and installation friendly, TerraBrute CR allows you to standardize on PVC throughout your potable water and sewer infrastructure. Whether ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX BlueBrute - Injection Molded Fittings

    Blue Brute fittings are injection molded and are even tougher than the pipe. Injection molded Blue Brute fittings have a wall thickness 125% larger than SDR18 pipe, and custom-made fabricated fittings are wrapped with a tough layer of fiberglass for extra protection.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX BlueBrute - Pipe Systems

    Designed for municipal applications, Blue Brute systems deliver superior strength with corrosion resistant performance and the ability to flex without damage. IPEX municipal pressure piping systems are made with a high-strength, high-impact PVC compound, allowing them to perform even under high traffic loads and deep burial conditions.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX - Brute and Fusible Series PVC Pipes

    IPEX has introduced new Fusible Brute and Fusible Series PVC pipes. By combining the mechanical properties of PVC with an innovative, patented butt fusion process, IPEX provides the only available method of installing a continuous, monolithic, fully restrained PVC pipe system. Capable of being used in a variety of trenchless or conventional direct ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX CycleTough - Model IPS - Piping Systems

    CycleTough IPS piping systems are specifically designed for irrigation systems and sewer forcemains. The constant cyclic surging that is associated with these applications demands a tough pipe, and more importantly, a specially engineered fitting.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • Ring-Tite and Enviro-Tite - Piping Systems

    4' - 42' (100mm - 1050mm). Ring-Tite and Enviro-Tite piping systems are SDR35 and SDR28 sewer pipes manufactured to demanding ASTM and CSA standards. The two products are identical except for Enviro-Tite having a minimum recycled material content of 50%. Both products have tight joints that can withstand well in excess of both the ASTM and CSA ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Sewer Pipe and Fittings Product line

  • IPEX Bionax - Model PVCO - Molecularly-Enhanced PVC Pipe

    Bionax is a molecularly-enhanced PVC pipe designed for water mains, sewage forcemains, irrigation lines and industrial process piping. Made from biaxially-oriented PVC material, Bionax has almost double the strength of conventional PVC and three times the impact absorption capability. Using a revolutionary new orientation process, this ultra ...

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Pressure Piping Systems Product line

  • IPEX - Model Ultra-X2 - Ultra Rib For Storm Water Systems

    IPEX's Ultra Rib has become the standard for storm water systems up to 600mm due to its ease of installation, reliable performance and resistance to corrosion and abrasion. Now IPEX is introducing Ultra-X2: a new dual wall PVC profile pipe that takes the benefits of PVC profile pipe up to 900mm.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Sewer Pipe and Fittings Product line

  • IPEX - Solvent Weld Sewer Fittings

    IPEX offers a wide variety of molded sewer fittings 3' in diameter and larger. Solvent welded fittings are typically installed in sanitary and drainage systems. Injection-molded fittings are available in 3' to 8'. Fabricated SDR35 solvent weld sewer fittings are available in 8' to 15'.

    By IPEX based in Verdun,, QUEBEC (CANADA). from Municipal Sewer Pipe and Fittings Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you