Capacity 100 – 3,500 g of ultra-pure active chlorine per hour. Generation of active chlorine in combination with a sodium hypochlorite solution using the vacuum process with the electrolysis system CHLORINSITU V Plus. Chlorination and pH value adjustment from a single system
Graduated measuring ranges 0.01 – 10 mg/l. Bromine measurement with DULCOTEST sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.
Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.
Capacity range 120 – 3,800 l/h. Manual polymer batching station Ultromat MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.
Graduated measuring ranges 0.01 – 200 mg/l. The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection application.
Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.
Graduated measuring ranges 0.01 – 10 mg/l. Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are guaranteed.
Measuring ranges 0 – 100 °C. Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.
Graduated pH measuring ranges 0 – 14. pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.
Graduated measuring ranges 0.01 – 10 mg/l. Chlorine dioxide measurement with DULCOTEST sensors offers precise, reliable, application-specific measured values in real time for all oxidation and disinfection tasks.
Output of 100 – 3,500 g ultra-pure active chlorine per hour. Generate ultra-pure active chlorine using the vacuum method with electrolysis system CHLORINSITU V. Suited to applications for metering hypochlorous acid and simultaneously correcting the pH value.
Output of 50 – 2,400 g sodium hypochlorite per hour. Electrolysis system CHLORINSITU II: Robust, safe and economical system for areas where carry-over of sodium chloride into the water being treated is not a problem.
Output of 100 – 10,000 g sodium hypochlorite per hour. Need sodium hypochlorite that is high-purity or low-chloride and low-chlorate? The electrolysis system CHLORINSITU III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling towers.
Graduated measuring ranges 0.01 – 10 mg/l. Disinfection of swimming pool water with the application-optimised DULCOTEST sensors for total available chlorine - exact measured values and high process reliability guaranteed.
Measuring range -1,500 … +1,500 mV. ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.