Articmaster - Air-Conditioning or Refrigeration Systems
Designed For Reliability: The Articmaster is designed with quality, reliability and recycle-ability in mind. With no moving parts, other than a single float ball to indicate refrigerant flow, there is nothing to break or wear out. In addition, the Articmaster does not require water, electricity and any additional source of energy to improve the efficiency of Air-Conditioning or Refrigeration Systems.
With a 3-year limited warranty and a working lifespan of 30 years, the Articmaster will last longer than the Air Conditioning and Refrigeration Equipments.
Easy To Install
Articmaster installation is simple and fast. A certified HVAC professional should be able to install an Articmaster typically in 2 to three hours. Some basic training is required, and our technical manual contains Information and Checklist to qualify a HVAC tech to be a certified Articmaster installer.
Short Payback Period
The Articmaster improves the efficiency of Air-Conditioning or Refrigeration Systems and pay for itself usually within three years. In some cases where the application is continuous, the payback period is less than two years.
Reduced Amperage Draw
The Articmaster reduces head pressure in the system, thus lowering the amperage draws on the compressor motor. The reduced head pressure of the system also lowers the liquid refrigerant temperature.
Less Compressor Run-Time
The Articmaster enables your cooling system to remove more. Heat with a cooler liquid refrigerant. Studies show that, with Articmaster, the Air Conditioner will run less frequently. Less run time equals lessfractional energy consumption. The Articmaster provides proper cooling with improved efficiency.
Extend Compressor Life
The Articmaster will extend the life of the compressor in several ways. First, the Articmaster creates turbulent flow of refrigerant which serves to circulate oil throughout the refrigerant line and move it to the compressor where it is needed. A well lubricated compressor last longer. Secondly, with Articmaster, the compressor runs less frequently, and thus experiences less wear and tear. Thirdly, reduced head pressure translates to less strain on the compressor and longer life.
A Green Product – Perform MORE Work with LESS Energy The Articmaster is a Green Product that increases the Air-Conditioning or Refrigeration System’s Efficiency, by providing PROPER COOLING USING LESS ENERGY.
1 The liquid refrigerant enters the Articmaster allowing the Compressor to do work with less Head Pressure
2 The lower Head Pressure reduces amperage draw AND lowers the liquid refrigerant temperature
3 At the bottom outlet is a stationary impeller that spins the liquid refrigerant as it
drains, creating a Swirling Turbulent flow
4 The liquid refrigerant leaving the Articmaster is in a swirling, uniform flow.
Increase flow velocity profile at the edge
Reduces flow restrictions
Removes oil that has collected on the tube inner surface
Maintain flow efficiency
5 The swirling, colder refrigerant passes through the thermal expansion valve,
enabling the refrigerant to absorb more heat at the evaporator coil
( Q=Mass*Cp(T2-T1)), where Cp is the specific heat.
6 The Efficiency of Air-Conditioning and Refrigeration Systems is generally described
Efficiency = Work Performed
Or = Cooling Performed
AC/Refrigeration System with Articmaster installed changes its
Efficiency by Increasing the Cooling Performed and/or Reducing the Energy
Consumed. Therefore, AC/Refrigeration System with Articmaster Efficiency is:
EFFICIENCY = INCREASED COOLING PERFORMED
REDUCED ENERGY CONSUMED
7 In colder weather application, as the evaporator coil becomes colder, the
compression ratio of the condenser is reduced due to lower head pressure
The lower head pressure reduces the liquid refrigerant to flow out of the condenser, allowing refrigerant to back up into the condenser The refrigerant vortex level in the Articmaster will become shallow and will cavitate or suck warm gas vapor from the upper portion of the vessel This will momentarily starve the evaporator, and the warm gas will defrost the coil, keeping it from freezing further