Dime Water

Automatic Deionizer (DI) Units

From

0

Two Column: This style of deionizer consists of two media tanks in series. The first tank contains cation resin in the Hydrogen (H) form and the second tank contains anion resin in the Hydroxyl (OH) form.

Typical treated water quality is in the range of 50,000-250,000 ohm resistivity depending on feed water chemistry and 1,000,000 to 2,500,000 ohm resistivity with R.O. water as a feed.

These units are designed to regenerate with chemicals directly from their shipping containers - no handling required. Chemicals used are 30% Hydrochloric (HCl) acid and 50% liquid Sodium Hydroxide (NaOH).

Systems are fully automatic with regeneration initiated by a field adjustable resistivity meter. A manual override is included to allow the operator to finish a “run” without interruption.

All systems fully assembled and wet tested prior to shipment.

Mixed Bed Single Tank

This style of deionizer consists of both the cation and the anion resin mixed within the same tank for the ultimate in the reduction of dissolved solids. Treated water quality is from 10,000,000 to 18,000,000 Ohm resistance.

Resins are separated during regeneration with HCl and NaOH and then re-mixed with air for service (a source of compressed air delivering 6.5 scfm/sq. ft. tank area is required). A softener is also required to pre-treat the anion regeneration water.

  • designed to regenerate with chemicals
  • no handling of the chemicals is required
  • fully automatic
  • regeneration initiated by a field adjustable resistivity meter
  • 30% Hydrochloric (HCl) acid
  • 50% liquid Sodium Hydroxide (NaOH

Customer reviews

No reviews were found for Automatic Deionizer (DI) Units. Be the first to review!