SSI Shred Systems Equipment Available In Brunei Darussalam
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI's 2000 PC pre-crusher compactors are the optimum compaction solution for transfer station facilities requiring self-contained units that compact material while providing greater payload in every container. Transfer solid waste more efficiently with a versatile compaction system. SSI’s ruggedly constructed compactors consistently ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
Hex Shafts are still considered by many to be stronger than round/keyed shafts. If it weren't for the wear and maintenance problems caused by loose cutters slipping across the hex face, they would still be preferred by many ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
Normally, with simple nut and bolt tightening, the shredder cutters and spacers gradually loosen during operation. This traditional locking method requires frequent and tedious maintenance to prevent loosening, damage and poor ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI's 2500 Series of pre-load compactors are ideal compaction solutions for MSW transfer, material recovery and scrap facilities requiring less than 300 tons per day of throughput. The 2500 SPH pre-load compactor features a single stage, dual acting cylinder designed to form two high, density, square ended bales for transfering municipal solid waste, recyclables, or other commodities into highway ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI shredding equipment using low-speed technology offer a variety of benefits. When used in conjunction with SSI’s auto-reverse and shock-load protection features, these shredders process a wide range of materials, including ferrous ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI's unique screen design not only efficiently controls particle size but also aids in the shredding action. Our shredder screens are concentrically aligned with the rotating cutter shafts, so as the cutters interact with the screen face, they are able to tear and pull cut material apart. For example, in tire shredding, this ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
and white goods more efficiently and reliably at rates of 30 tons per hour with 4:1 reduction ratio from remote locations with this mobile scrap metal compaction ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
, recyclables, or other commodities into highway and intermodal trailers or containers. This increases throughput for the same horsepower of other compaction systems. ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI’s cutting chamber design isolates system bearings and seals from processed material preventing seal damage and improving on-line reliability. SSI’s shredder designs incorporate splash plates, sometimes called false end plates, at each end of the cutting chamber. Splash plates isolate shredded material from the seal area. To ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
Cleaning fingers prevent material from accumulating between cutters or wrapping around the a shredder’s shaft. They also provide extra shaft support in applications which experience shaft flexing. These flat steel plates attach to the side walls of a shredder’s cutting chamber. The semicircular fingers extend between the shredder’s cutters with finger notches fitting closely ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI offers both electric and hydraulic drives in direct drive arrangements that feature a high-efficiency, force-balanced planetary gearbox that provides speed reduction and torque amplification. SSI Shredding Systems splines the planetary gearbox directly onto the drive shaft. The planetary gearbox offers several standard gear ratios. That ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
For most shredder applications SSI's standard cutter hardness is suitable. However, when certain applications require a harder, sharper edge, the cutters are hardfaced. This is done by welding alloys to the cutter edges. SSI uses proprietary alloys to hardface their cutters. The alloys are rated up to a hardness level of HRC 58-66, with 61 being average. The advantage of hardfacing is that the ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
All SSI shredders have a built in control feature that allows the machines to automatically reverse operational direction any time it’s required to re-orient the material and enhance the machine’s ability to grab and process it. In the event that the material cannot be processed by the shredder, SSI controls will automatically stop the shredder after a pre-set number of attempts and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you