Impactors Equipment Available In Burundi
-
Manufactured by TSI Incorporatedbased in USA
MOUDI-II and NanoMOUDI-II impactors are second generation Micro-Orifice, Uniform-Deposit Impactors from MSP. These impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 6000 precision micro-orifice nozzles are used to reduce pressure drop, jet velocity, particle bounce, and ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
A sampling device can be used as a substitute for the respiratory tract as a collector of airborne particles, and as such, it shall reproduce to a reasonable degree the lung penetration by these particles. ACI Cascade Impactor 8 Stage for the efficient collection of airborne particles. ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
Westech 8-stage non-viable cascade impactors are the result of many years experience in the design and manufacturing of similar devices. The team at Westech in collaboration with Dr Steve Nichols, then of Rhone Poulenc Rorer, were responsible for the design, configuration and validation of the 60 L/min and 90 L/min versions of the standard 28.3 ...
-
Manufactured by Baioni Crushing Plants Spabased in ITALY
Vertical axis mills are designed to combine high productivity with a good efficiency and an excellent reduction ratio of finished products. Baioni vertical shaft impactor MV 2400 is employed as a rock-on- rock impactor, the configuration of which must be chosen according to production needs and degree of ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
A new cascade impactor has been designed for the OINDP Industry, specifically for pharmaceutical inhaler testing, and is the most efficient and accurate way to do standard in vitro APSD testing. The Impactor, called the Next Generation Impactor (NGI), has seven stages and is intended to operate at any inlet flow rate between 30 and 100 ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
Particles must be separated from the air and “physically” captured onto a suitable impaction surface (particle collection efficiency). A sampling device can be used as a substitute for the respiratory tract as a collector of viable airborne particles. The 6 Stage Multistage Viable Impactor with 400 small round jets. ...
-
Manufactured by Tisch Environmental Incbased in USA
Our Personal Cascade Impactor is a precision cascade impactor worn by personnel to provide complete and accurate aerodynamic particle size distributions of the particulate in their environment. A personal mounting bracket is provided to attach to the subject’s lapel or pocket. It is compact, light-weight (7 oz. Max.) and are available with ...
-
Manufactured by SKCbased in USA
The SKC BioStage® viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and fungi. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in ...
-
Manufactured by Westech Scientific Instruments (Westech)based in UNITED KINGDOM
ICTUS is a proven, dedicated system for the complete automation of Andersen Impactors capable of testing up to 30 inhalers in 24 ...
-
Manufactured by American Pulverizer Companybased in USA
American Pulverizer Horizontal Shaft Impactors are primary and secondary impact crushers. They are available in 20 sizes with rotor dimensions from 12" to 72" and feed openings from 7½" x 12½" to 42" x 84". Throughput capacity can vary from 25 TPH to 1000 TPH depending on the crusher model and material characteristics. They ...
-
Manufactured by Shandong Zhongrui Construction Machinery Co., Ltd.based in CHINA
; the parts have good consistency, high reliability, low overall failure rate, low disassembly frequency, long impact life and low cost of use. It is one of the most stable impactors in China. ...
-
Manufactured by SKC Asia HSE Sampling Technologies Pte Ltdbased in SINGAPORE
The SKC BioStage viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and bacteria. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in ...
-
Manufactured by Shandong Zhongrui Construction Machinery Co., Ltd.based in CHINA
is simple and reasonable, and the maintenance is convenient; the parts have good consistency, high reliability, low overall failure rate, low disassembly frequency, long impact life and low cost of use. It is one of the most stable impactors in ...
-
Manufactured by Hauke - MP GmbHbased in AUSTRIA
The standard material for our impactors is stainless steel. To keep the volume flowrate constant, critical nozzles are provided. Below measuring ranges are given in aerodynamic equivalent ...
-
Manufactured by InPharmaTEC, a TCR Tecora divisionbased in ITALY
Andersen Cascade Impactor 2 stages is one of the confgurations of Andersen Cascade Impactor 6 stages Viable. It is used when size distribution is not required and only respirable and non-respirable segregation/fractions and total counts are needed. The Two Stage Viable Impactor consists of two sampling stages. When air is drawn through the ...
-
Manufactured by In-Tox Products, LLCbased in USA
In-Tox Products' Impactors are precision engineered and their careful design provides a number of advantages to the user. The material collected on each stage contains particles having sizes ranging from the cutoff size of the previous stage to the cutoff of the collecting size. Therefore, the analysis of the impactor data may be done ...
-
Manufactured by Lippmann Milwaukee, Incbased in USA
The 4800r features were engineered using information from our customer base and dealer network, delivering a closed-circuit impactor plant a step above the rest. Natural material flow with rotor direction improves efficiency and pulls dust away from engine. Spacious underpan area allows smooth and consistent material flow. Material is ...
-
Manufactured by California Measurements, Inc.based in USA
6-stage cascade impactor; covers particle size range of 16 to 0.5 microns; 12.6 lpm flow rate; 1.5 inch diameter glass slides as impaction plates; complete with detached vacuum pump assembly, flowmeter and flow-control metering valve. Accessories, such as, glass throat and other inlets, etc. are ...
-
Manufactured by Tisch Environmental Incbased in USA
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with ...
-
Manufactured by TSI Incorporatedbased in USA
Models 128, 129, 130 and 131 are High Flow Impactors (HFI) ideal for sampling particles at low concentrations (pristine environments), for collecting more mass per stage as compared with conventional MOUDI™ impactors, or for obtaining samples in shorter sampling intervals. HFI impactors are available with 3, 4, 5 or 6 stages in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you